Front | 27mm Heavy Duty Non Adjustable Sway Bar
| RC0047F-27 | 1 | | $357.00 |
Stabiliser Bar, suspension27mm Heavy Duty Non Adjustable Sway BarSuperPro Roll Control Front Sway Bar Packages are the perfect addition to a 4WD. The resistance to the fitment of bigger front Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension. If the replacement Sway Bars are designed correctly and the Sway Bar links are lengthened, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Sway Bars will- Improve the stability by compensating for the change in centre of gravity of the chassis
- Increase tyre life
- Control body roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Rear Sway Bar Kit to get the complete handling upgrade package - Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit
| TRC1190 | 1 | | $440.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade Our front lower control arm kit for the Toyota Prado 90 Series, Hilux Surf & 4 Runner designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with proprietary SuperPro bushings. We have made TRC1190 by far the best repair choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.Vehicle Application Information: - standard replacement
- kit does not include ball joints, please re-use OE ball joints
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Front Bush Kit
| SPF2711K | 1 | | $270.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF2712K | 1 | | $270.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Upper Assembly Kit
| TRC1157 | 1 | | $283.93 |
Control/Trailing Arm, wheel suspensionControl Arm Upper Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade with SuperPro Bushings Our front upper control arm kit for the Toyota Prado 95 Series is designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with proprietary SuperPro bushings. We have made TRC1157 by far the best repair choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.Vehicle Application Information: - standard replacement
- kit does not include ball joints, please re-use OE ball joints
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Upper Inner Bush Kit
| SPF2713K | 1 | | $289.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Front
- Part of kit: (x)
|
Front | ReadyStrut Top Caps
| RS005 | 2 | | $106.00 |
Suspension Strut MountingReadyStrut Top CapsVehicle Application Information: - to suit vehicles with flat ground coil
Strut Cap, Spring Seat, Nuts & Washers - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Shock Absorber Lower Bush Kit
| SPF2348PK | 1 | | $156.00 |
Bush, shock absorberShock Absorber Lower Bush KitVehicle Application Information: - does not suit Koni & EFS Shocks
Utilises superior SuperPro Hybrid material for massive increase in durability in all applications. Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Shock Absorber Upper Bush Kit
| SPF2507K | 1 | | $47.00 |
Bush, shock absorberShock Absorber Upper Bush KitVehicle Application Information: - to suit aftermarket shocks only with 12mm pin and a stud length of 72.5mm
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush (Power Steering)
| SPF1836K | 1 | | $89.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)kit suits both sides of the rack - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Strut Top Spacer Kit
| TRC008-6 | 1 | | $117.00 |
Spacer Sleeve, suspension strut support mountStrut Top Spacer KitOD: 125mm ID: 79mm H: 6mm Need more lift?? If you have added extra accessories to the front of your 4WD and need to correct the ride height, now SuperPro has the solution! The SuperPro Strut Spacer Kit can help with correcting lost ride height on either one side or both sides of your 4WD without having to change springs. Vehicle Application Information: - Raises vehicle approximately 10-12mm
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4015 | 2 | | $47.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint/Bush Link
Length 128mm center to center Vehicle Application Information: - Fitting time [min]: 30
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF2755SK | 1 | | $16.00 |
Bush, shock absorberSway Bar Link Bush Kit- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 30
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1486-25K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 16, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 & 30mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1486-26K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 16, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 & 30mm Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1486-28K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - to suit aftermarket sway bar
available Sizes 16, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 & 30mm - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | 20mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0047RZ-20 | 1 | | $ |
Stabiliser Bar, suspension20mm Heavy Duty 3 Position Blade Adjustable Sway BarSuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD. The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension. If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package - Fitting Difficulty: moderate
- Fitting time [min]: 120
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | 22mm Extra Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0047RZ-22 | 1 | | $430.00 |
Stabiliser Bar, suspension22mm Extra Heavy Duty 3 Position Blade Adjustable Sway BarSuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD. The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension. If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package - Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Panhard Rod Bush Kit
| SPF1488K | 1 | | $66.00 |
Bush, panhard rodPanhard Rod Bush Kit- Fitting time [min]: 90
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Shock Absorber Upper Bush Kit
| SPF0201K | 1 | | $39.00 |
Bracket, stabiliser mountingShock Absorber Upper Bush KitVehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Sway Bar Link - Heavy Duty Extended
| TRC4307 | 2 | | $90.00 |
Stabiliser Bar, suspensionSway Bar Link - Heavy Duty ExtendedSuperPro Heavy Duty Extended Thread Sway Bar Links are designed and manufactured to suit lifted Vehicles from 2-8”. They are designed to allow you to effectively trim the Sway Bar Link to your desired length to provide adequate tail shaft clearance and Sway Bar alignment. Manufactured from a Heavy Duty 16mm rod our Heavy Duty Sway Bar Links offer increased strength and stud articulation, providing for less stress on the sway bar links during wheel articulation. - Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Sway Bar Link Bush Kit
| SPF2092B-4K | 1 | | $20.00 |
Mounting, stabiliser barSway Bar Link Bush KitVehicle Application Information: - Fitting time [min]: 30
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1487-16K | 1 | | $45.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - to suit original sway bar
available Sizes 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 & 27 mm Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1487-21K | 1 | | $45.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 & 27 mm Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1487-23K | 1 | | $45.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 & 27 mm Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | Trailing Arm Lower Bush Kit
| SPF1489K | 1 | | $198.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush Kit- Fitting Position: Rear
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Trailing Arm Upper Bush Kit
| SPF1490K | 1 | | $147.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush Kit- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Trailing Arms & Panhard Rods Bush Kit
| KIT092RK | 1 | | $369.00 |
Mounting, control/trailing armTrailing Arms & Panhard Rods Bush KitKit contains: - Rear Panhard Rod Bush Kit
- Rear Trailing Arm Lower Bush Kit
- Rear Trailing Arm Upper Bush Kit
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 360
- Part of kit: (x)
|