Front | Control Arm Lower Assembly Kit
| TRC1131 | 1 | | $396.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade The SuperPro front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made this kit by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.Vehicle Application Information: - standard replacement
- Includes Ball Joint
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit Standard Replacement | SPF4863K | 1 | | $193.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitStandard Replacement - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset Alignment Correction | SPF4865K | 1 | | $193.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 degree caster adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset Alignment Correction | SPF4864K | 1 | | $193.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - There must be at least 30mm of clearance between the droop stop and the chassis at ride height to avoid any damage to the arms.
- Fitting time [min]: 150
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement | TRC4085 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkStandard Replacement 12mm Ball Joint Link
180 Degree opposed
Length 71mm center to center - Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Control Arm Lower-Outer Bush
| SPF5470K | 1 | | $81.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer BushControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Rear | Sway Bar Link Standard Replacement | TRC4086 | 2 | | $39.00 |
Stabiliser Bar, suspensionSway Bar LinkStandard Replacement 10mm Ball Joint Link to 10.5mm ID Bush
90 Degree opposed
Length 107mm center to center - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Part of kit: (x)
|