Front | Control Arm Lower Inner Bush Kit
| SPF1889K | 1 | | $105.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitVehicle Application Information: - Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper Inner Bush Kit
| SPF5696K | 1 | | $230.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting time [min]: 210
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Shock Absorber Upper Bush Kit
| SPF2755SK | 1 | | $16.00 |
Bush, shock absorberShock Absorber Upper Bush Kit- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Position: Rear
- Fitting time [min]: 30
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF1255K | 1 | | $102.00 |
Bush, strut mountStrut Bar To Chassis Mount Bush KitVehicle Application Information: - Fitting time [min]: 90
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF2906K | 1 | | $58.00 |
Mounting, stabiliser barSway Bar Link Bush KitVehicle Application Information: OD: 25mm
ID: 10mm
Height: 16.5mm - Fitting Position: Front
- Fitting time [min]: 40
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1085 | 1 | | $212.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: 10mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 185 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1092-25.5K | 1 | | $35.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 22, 23, 25.5, 27 & 28mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - 25.5mm ID
- to suit 2WD only
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount To Link Bush Kit
| SPF1092-27K | 1 | | $61.00 |
Mounting, stabiliser barSway Bar Mount To Link Bush Kitavailable Sizes 22, 23, 25.5, 27 & 28mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Leaf Spring Bush Kit
| KIT070HK | 1 | | $157.00 |
Bushing, leaf springLeaf Spring Bush KitKit contains: 1 x SPF0972HK, 1 x SPF2231-8HK These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! Vehicle Application Information: - H Kit for Severe Conditions or Heavy Duty applications
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 210
- Fitting time [min]: 210
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Leaf Spring Bush Kit
| KIT070K | 1 | | $124.00 |
Bushing, leaf springLeaf Spring Bush KitKit contains: 1 x SPF0972K, 1 x SPF2231-8K These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! - Fitting Position: Rear
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Spring Front Eye Bush Kit
| SPF0972HK | 1 | | $89.00 |
Bushing, leaf springSpring Front Eye Bush KitVehicle Application Information: - Tube 19 x 14.5 x 68.5
- Heavy Duty
- Fitting Position: Rear
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Spring Front Eye Bush Kit
| SPF0972K | 1 | | $72.00 |
Bushing, leaf springSpring Front Eye Bush KitVehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Spring Rear Bush Kit All
| SPF2231-8K | 1 | | $66.00 |
Bushing, leaf springSpring Rear Bush Kit All- Fitting Position: Rear
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Position: Front
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Part of kit: (x)
|