| Front and Rear | Vehicle Master Kit
| KIT248K | 1 |  | $867.00 |
Mounting Kit, control/trailing arm mountingVehicle Master KitVehicle Master Kit Kit contains:
Front Control Arm Upper Inner Bush Kit - SPF5583K x 2
Front Control Arm Lower Inner Front Bush Kit - SPF5584K x 1
Front Control Arm Lower Inner Rear Bush Kit - SPF5585K x 1
Rear Leaf Spring Front Eye Bush Kit - SPF5586K x 1
Rear Leaf Spring Rear Eye Bush Kit - SPF5587K x 1
Rear Leaf Spring Shackle Bush Kit - SPF5588K x 1 Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Axle alignment required after fitting
- Fitting time [min]: 540
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Front Bush Kit
| SPF5584K | 1 |  | $170.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush KitControl Arm Lower Inner Front Bush Kit Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Rear Bush Kit
| SPF5585K | 1 | | $143.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitControl Arm Lower Inner Rear Bush Kit Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Part of kit: (x)
|
| Front | Control Arm Replacement Ball Joint for Fixed Offset Control Arm
| KIT6650RK | 2 |  | $111.00 |
Ball Joint Repair KitControl Arm Replacement Ball Joint for Fixed Offset Control ArmThis kit contains one replacement heavy-duty high-articulation ball joint for the SuperPro fixed offset Upper control arm. The kit contains a brand-new ball joint, which also includes a new dust boot, circlip, nut and any other required installation hardware.
Notes: If both ball joints need replacing, two kits will be required.
This kit is used to replace the ball joint in the following part numbers: TRC6650
Vehicle Application Information: - replacement Ball Joint to suit TRC6650 only
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Part of kit: KIT6650K (x2)
|
| Front | Control Arm Replacement Ball Joint for Fixed Offset Control Arm
| KIT6651RK | 2 | | $111.00 |
Ball Joint Repair KitControl Arm Replacement Ball Joint for Fixed Offset Control ArmThis kit contains one replacement heavy-duty high-articulation ball joint for the SuperPro fixed offset Upper control arm. The kit contains a brand-new ball joint, which also includes a new dust boot, circlip, nut and any other required installation hardware.
Notes: If both ball joints need replacing, two kits will be required.
This kit is used to replace the ball joint in the following part numbers: TRC6651
Vehicle Application Information: - replacement Ball Joint to suit TRC6651 only
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Replacement Bush Kit for Fixed Offset Control Arm
| KIT6650K | 2 | | $71.00 |
Mounting Kit, control/trailing arm mountingControl Arm Replacement Bush Kit for Fixed Offset Control ArmThis kit contains two replacement SuperPro polyurethane bushings for the SuperPro fixed offset upper control arm.
The replacement kit contains new bushings, crush tubes, a tube of grease and any other required hardware such as washers.
Note: Two kits will be required if the bushings in both arms need replacing.
This kit is used to replace the bushings in the following part numbers: TRC6650, TRC6651 & TRC6655
Vehicle Application Information: - replacement bush kit to suit TRC6650, TRC6651 & TRC6655
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: KIT6650RK (x2)
|
| Front | Control Arm Upper Inner Bush Kit
| SPF5583K | 2 | | $162.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitControl Arm Upper Inner Bush Kit Vehicle Application Information: - Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF5589-34K | 1 | | $60.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 34 & 36mm Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: (x)
|
| Rear | Leaf Spring Front Eye Bush Kit
| SPF5586K | 1 | | $136.00 |
Bushing, leaf springLeaf Spring Front Eye Bush Kit- Fitting Difficulty: moderate
- Fitting time [min]: 120
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Leaf Spring Rear Eye Bush Kit
| SPF5587K | 1 | | $102.00 |
Bushing, leaf springLeaf Spring Rear Eye Bush Kit- Fitting Difficulty: moderate
- Fitting time [min]: 120
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Leaf Spring Shackle Bush Kit
| SPF5588K | 1 | | $91.00 |
Bushing, leaf springLeaf Spring Shackle Bush Kit- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
