Just like the Hilux Camber Bolts, TRC0019, this kit overcomes the problems associated with the O.E lower inner camber bolts
The trouble starts when the front lower camber bolts rust into the tubes of the standard camber bolt set up and the tube of the rear bushing. SuperPros’ one piece front and rear bolts, designed to not corrode, make future wheel alignments trouble free. SuperPro has released the perfect solution, everything that is required for one side, except the angle grinder!
SuperPro now has a complete Camber Bolt solution for the Prado 120 Series.
After releasing, what is arguably, the most sophisticated, castor increase and high articulation and replacement Radius arms for the Nissan Patrol GU.
SuperPro has the Patrol GQ & the Maverick DA covered!
The SuperPro Lift Correction Arms incorporate our Hybrid Blade Technology and have been developed using sophisticated Finite Element Analysis programming, used extensively in the OE environment, along with a rigorous testing regime both in the lab and in the field.
The combination of a 20% increase in sectional properties combined with the use of OE grade High Strength, High Toughness Australian steel, the result is an arm of comparable weight to the original radius arm, with increased strength, built for all on road and off-road conditions.
Please Note:
Sway Bar Bracket SPF0981K and Sway Bar Mount Bush SPF0642-__K (Sway Bar measurement required) need to be purchased separately!
Following on from the success of the Ford and Toyota range of Adjustable Upper Control Arms SuperPro is pleased to announce the release of the Nissan Navara
D40, NP300 and Nissan Pathfinder R51 Adjustable Upper Control Arms.
Previously made from steel tube welded to a forged steel ball joint plate, the new arms utilise the manufacturing method developed and refined with the Ford and Toyota
arms.They are built tough in Australia using high strength, OE grade Aussie steel.
Getting the correct alignment is no longer a problem and the design of these Arms overcome clearance issues. These arms deliver up to 3 degree of caster along with
extra camber, allowing for the optimum alignment settings for a 2” lifted vehicle. Not only do these arms provide for better wheel alignment settings, they have been
designed to include increased clearance between the arm and strut at full droop.
Available from 18.04.2017
Key Features
This month we are transitioning the Nissan Navara and Pathfinder Front Control Arm bushings to our new design.
Incorporating a half shell design with more material, the new design bushes will work better and be easier to install and still have all the adjustability of the previous versions.
Nissan Navara D40 - 2005-2014
Nissan Navara NP300 4WD Dual Cab - 2015-on
Nissan Navara NP300 4WD Single & King Cab - 2015-on
Nissan Pathfinder R51 - 2005-on
Part No: SPF3870K, SPF3871K, SPF3875K, SPF4524-__k, SPF4525-__K, SPF4527K, SPF4526K, SPF4529K, SPF4528K
Front Control Arm Lower-Front Bush Kit |
|
Front Control Arm Lower-Rear Bush Kit |
|
Front Control Arm Lower-Rear Bush Kit - Double Offset |
|
SPF4525-__K Rear Sway Bar To Lower Control Arm Bush Kit
|
|
SPF4527K Rear Control Arm Inner Bush Kit
|
|
Rear Control Arm Inner Bush Kit - Adjustable
0.5 Degree Camber available
|
|
Rear Control Arm Outer Bush Kit
|
|
Rear Control Arm Outer Bush Kit - Adjustable
|
Part No: TRC0011
The hard work by SuperPro Roll Control will be on show through the release of the latest Rear Lower Camber Adjustable Control Arm for these popular performance vehicles.
This hi-strength, adjustable Rear Lower Control Arm provides +/- 2.0 degrees of camber change for these popular vehicles. This kit is easy to adjust with a cam located at the outboard end of the arm. Designed for the ultimate in performance and handling, these arms deliver strength, adjustability and more positive arm location with SuperPro Bushings.
Click here for catalogue details!