Part No: SPF3965K, SPF3963K, SPF3473K, SPF4156-18K, RC0039FZ-20, SPF4162K, RC0039RZ-18

The new Nissan Pulsar SSS is here ... and benefits enormously from a SuperPro upgrade!

SuperPro have identified the key issues and set about engineering the perfect solution.

FRONT

Problems:

• Soft voided front and rear OEM rubber Control Arm bushings allow excessive movement under braking and acceleration
• A pull left alignment issue which is not adjustable from factory
  
  
• Very soft OEM rubber sway bar bushes

Solutions:

• SuperPro Offset Vertical Pivot rear bushes were designed to correct the “pull left” problem and firm up the lateral movement. A cotton reel style SuperPro front bush was designed to firm up the control arm under load
• A two piece dual Duro SuperPro Sway Bar D-Bush was engineered to overcome the O.E design, as the Sway bar in these sits very high off the cross member. These new bushings also complement the new larger diameter Roll Control sway bar.
  

REAR

Problem:

• The beam axle rear with soft OEM rubber bushes, inherited from the standard Pulsar, allows excessive rear passive steer.

Solution:

• SuperPro has engineered a two piece polyurethane bushing to tighten the rear end

The fitment of SuperPro products eliminates all the unwanted control arm movement, rear end passive steer and delivers greatly improved handling while cornering, accelerating and braking, all without increased noise vibration and harshness.

Add the new SuperPro Roll Control sway bars and the new SSS Pulsar handles like a performance vehicle!

Part No: KIT173K

• SuperPro Bush Master Kit for JK Wrangler: for repairs, performance and upgrades.

SuperPro is the ideal choice for bush replacements, repairs, performance upgrades and lifts for Jeep Wranglers.
SuperPro components outperform the original O.E bushings in every location on the vehicle.

When you need repairs

• Rubber bushings deteriorate and induce undesirable characteristics into the handling.
• The trailing arm bushes stabilise the forward and aft movement of both axles. Worn bushings impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject severe directional changes under braking.
• The Panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and unstable under braking.

The solution:

• SuperPro bushings are more durable and give more positive arm location than an O.E rubber bushing, resulting in a vehicle that gives the driver that “New Car Feel” for the life of the car.
• 

When you need performance

• Fitting bigger, wider wheels and tyres to the Wrangler seriously impact the performance of the rubber bushes.
• Increasing the tyre contact patch increases the amount of rubber in contact with the road; this in turn amplifies the drag and load imparted on the rubber trailing arm bushings. This will cause instability under braking and dramatically reduce their service life.

The solution:

• Fitting SuperPro at the same time as the wider wheels will enhance the vehicles suspension to handle the additional forces imparted by the bigger tyres

When you need an upgrade

• Raising the Wrangler dramatically alter the performance of a rubber bushing.
• Rubber bushings work through a limited range of rotation and have voiding in specific locations for their optimal performance, increasing the ride height of a vehicle changes all this.

The solution:

• SuperPro bushings provide superior control and, in specific locations, work as a free pivoting bearing, regardless of ride height.
• Lifting a vehicle also lifts the centre of gravity, in turn inducing greater forces on the suspension, requiring a more resilient suspension bushing in every location to control the attitude of the trailing arms.

When any of the above conditions are changed, fit SuperPro bushings! To enhance the handling performance and safety of the JK Wrangler fit SuperPro Bushings, now! SuperPro has the perfect solution, every bush needed in one kit, the SuperPro Enhancement Kit - KIT173K

Download a copy of the Jeep Wrangler JK Bulletin