Front | Control Arm Lower Assembly Kit
| TRC1075 | 1 | | $286.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade This front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled and with proprietary SuperPro bushings. We have made TRC1075 by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.Vehicle Application Information: - standard replacement
- Includes Ball Joint
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF2082K | 1 | | $101.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitVehicle Application Information: Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 210
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Double Offset
| SPF2084K | 1 | | $110.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Double OffsetVehicle Application Information: A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 210
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Single Offset
| SPF2083K | 1 | | $110.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Single OffsetVehicle Application Information: Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- alignment correction
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front Bush Kit Replaces OEM Part Number: 357407182 | SPF1915K | 1 | | $60.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush KitReplaces OEM Part Number: 357407182 Bush OD 30mm
Tube 19x12.3x54 - Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Engine Support Lower Front Bush Kit
| SPF2576K | 1 | | $43.00 |
Rubber Buffer, engine mounting systemEngine Support Lower Front Bush KitVehicle Application Information: - Replacement of original rubber bush
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF3366K | 1 | | $44.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush Kit- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4063 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10.5mm ID Bush/Bush Link
90 Degree opposed
Length 105.5mm center to center Vehicle Application Information: - Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF2127K | 1 | | $53.00 |
Mounting, stabiliser barSway Bar Link Bush KitVehicle Application Information: - upper & lower mounts
- use original crush tube
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2593-21K | 1 | | $37.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 17, 18, 19, 20, 21, 22, 23, 25 & 26mm Vehicle Application Information: - Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2593-22K | 1 | | $37.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 17, 18, 19, 20, 21, 22, 23, 25 & 26mm Vehicle Application Information: - Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2593-23K | 1 | | $37.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 17, 18, 19, 20, 21, 22, 23, 25 & 26mm Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Beam Axle Pivot Bush Kit
| SPF2481K | 1 | | $271.00 |
Bush, beam axleBeam Axle Pivot Bush KitRemove original outer shell for fitment Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2592-24K | 1 | | $85.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 15, 16, 18, 19, 20, 21, 22 & 24mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|