| Front and Rear | Performance Sway Bar Upgrade Kit
24mm Front 2 Point Adjustable and 24mm Rear 2 Point Adjustable Sway Bars | RCVAG005KIT | 1 |  | $1016.90 |
Stabiliser Bar, chassisPerformance Sway Bar Upgrade Kit24mm Front 2 Point Adjustable and 24mm Rear 2 Point Adjustable Sway Bars Kit includes Front and Rear Sway Bars, Heavy Duty High Articulation Sway Bar Links SuperPro Roll Control Swaybar Kits are designed to deliver a predictable, neutrally balanced suspension.
If you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer!
By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 360
- Part of kit: (x)
|
| Front | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0005FZ-24 | 1 | | $378.25 |
Stabiliser Bar, chassis24mm Heavy Duty 2 Position Blade Adjustable Sway BarIf you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer!
By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Control Arm Lower-Front Bush Kit
| SPF4175K | 1 |  | $97.33 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush Kit- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
Standard Replacement | SPF4176K | 1 | | $193.27 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush KitStandard Replacement Suits vehicles with vertically mounted lower Control Arm Bush - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Double Offset
Double Caster Offset | SPF4178K | 1 | | $193.27 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Double OffsetDouble Caster Offset Vehicle Application Information: - up to 2 degrees caster adjustment available
Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!Vehicle Application Information: - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Single Offset
Single Caster Offset | SPF4177K | 1 | | $193.27 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Single OffsetSingle Caster Offset Vehicle Application Information: - 1 degree caster adjustment available
Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.Vehicle Application Information: - Steering Pull Correction Kit
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4048 | 2 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 12mm Ball Joint Link
90 Degree opposed
Length 334mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12265 | 1 | | $229.77 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 320 mm - Maximum Length 365 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | 22mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0005RZ-22 | 1 | | $378.25 |
Stabiliser Bar, chassis22mm Heavy Duty 2 Position Blade Adjustable Sway BarIf you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer!
By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0005RZ-24 | 1 | | $410.06 |
Stabiliser Bar, chassis24mm Heavy Duty 2 Position Blade Adjustable Sway BarIf you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer!
By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Sway Bar Link
Standard Replacement | TRC4050 | 2 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 10mm Ball Joint Link to parallel 10mm ID Bush
Length 95.9mm center to center - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045L | 1 | | $190.88 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
