Front and Rear | Vehicle Master Kit
| KIT252K | 1 | | $731.00 |
Mounting, control/trailing armVehicle Master KitComplete Vehicle Master Kit
Kit contains: - SPF3655K - Front Leading Arm Lower Bush Kit
- SPF3751K - Front Leading Arm Upper Front Bush Kit
- SPF3654K - Front Leading Arm Upper Rear Bush Kit
- SPF3661K - Trailing Arm Lower Bush Kit
- SPF3660K - Trailing Arm Upper Bush Kit
- SPF5575K - Rear Panhard Rod Bush Kit
- SPF5581K - Front Panhard Rod To Diff Mount Bush Kit
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting time [min]: 500
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Leading Arm Upper Front Bush Kit
| SPF3751K | 1 | | $142.00 |
Mounting Kit, control/trailing arm mountingLeading Arm Upper Front Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: KIT252K (x1)
|
Front | Leading Arm Upper Rear Bush Kit
| SPF3654K | 1 | | $89.00 |
Mounting Kit, control/trailing arm mountingLeading Arm Upper Rear Bush Kit- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: KIT252K (x1)
|
Front | Panhard Rod to Diff Mount Bush Kit
| SPF5581K | 1 | | $56.00 |
Bush, panhard rodPanhard Rod to Diff Mount Bush Kit- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Coil Spring Bush Kit - Upper
| SPF5574K | 2 | | $51.00 |
Spring SeatCoil Spring Bush Kit - UpperA=108mm B=65mm C=10mm Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Panhard Rod Bush Kit
| SPF5575K | 1 | | $130.00 |
Bush, panhard rodPanhard Rod Bush Kit- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12200 | 1 | | $226.00 |
Mounting Kit, stabiliser link/coupling rodSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Assembly Kit - Upper
| TRC1186 | 1 | | $512.00 |
Control/Trailing Arm, wheel suspensionTrailing Arm Assembly Kit - UpperLeft and Right Arms for lifted vehicles. Off-car adjustable for pinion angle correction, suits lifted vehicles up to 100mm. This trailing arm kit for the Jeep Wrangler JK & JL is designed to correct the pinion angle on a lifted vehicle. Offering an adjustable solution, while improving both on- and offroad performance. Designed as an upgrade and not just as a repair solution! Supplied as a complete kit and fully assembled with SuperPro bushings. We have developed this arm kit to be by far the best choice on the market. Fitted with SuperPro bushes, these suspension arms have been optimised for longevity, durability and performance without any unwanted NVH.SuperPro Control & Trailing Arms are perfectly suited as an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
Fully developed by our Australian based R&D team.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Lower Bush Kit
| SPF3661K | 1 | | $189.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 180
- Part of kit: KIT252K (x1)
|
Rear | Trailing Arm Upper Bush Kit
| SPF3660K | 1 | | $149.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush Kit- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: KIT252K (x1)
|