Mounting Kit, control/trailing arm mounting
SuperPro Control Arm Bush Kit
Alignment Correction
Product Specifications:
- Components Per Product: 2B,1IS,2S,2T
Vehicle Application Information:
- There must be at least 30mm of clearance between the droop stop and the chassis at ride height to avoid any damage to the arms.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
Vehicle Application Information:
- Bush OD 65mm
- alignment correction
- Steering Pull Correction Kit
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
