Front | Camber Adjusting Bolt Kit Adds +/- 1.5 Degrees camber | SPF4351-12K | 1 | | $53.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 12mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Front Bush Kit
| SPF1843K | 1 | | $109.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush Kit- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit
| SPF1280K | 1 | | $146.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitVehicle Application Information: - PS & DS standard
- standard replacement
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit - Single Offset
| SPF1281K | 1 | | $215.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Single OffsetUse this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - PS increased, DS standard caster
- Steering Pull Correction Kit
- alignment correction
- Fitting time [min]: 150
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4023L | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
90 degree opposed
Length 105mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4023R | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
90 degree opposed
Length 105mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Camber Adjusting Bolt Kit Adds +/- 1.5 Degree Camber | SPF4351-12K | 1 | | $53.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degree Camber Camber Bolt Kit 12mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 | | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1826-16K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 22mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|