| Front | Control Arm Lower Camber Bolt Kit
Complete set of replacement Camber Bolts | TRC0022 | 1 |  | $244.00 |
Kit, camber adjustmentControl Arm Lower Camber Bolt KitComplete set of replacement Camber Bolts  2hrs Fitment Time Fitment Difficulty- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Bush Kit
| SPF4032K | 1 |  | $195.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitKit contains front & rear position bushings Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Position: Front
- 4hrs Fitment Time
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit
| SPF4031K | 1 | | $111.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitKit contains front & rear position bushings Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- 4hrs Fitment Time
- Fitting Position: Front
- Fitment Difficulty
- Part of kit: (x)
|
| Front | ReadyStrut Top Caps
| RS012 | 2 | | $86.00 |
Suspension Strut MountingReadyStrut Top CapsVehicle Application Information: - suits vehicles with full wire coil
Strut Cap, Spring Seat, Nuts & Washers - 1hrs Fitment Time
- Fitting Position: Front
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Shock Absorber Upper Bush Kit
| SPF3757K | 1 | | $46.00 |
Bush, shock absorberShock Absorber Upper Bush Kit- Fitting Position: Front
- 2.5hrs Fitment Time
- Fitment Difficulty
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Spring Seat Upper Bush Kit
| SPF3002K | 1 | | $51.00 |
Spring CapSpring Seat Upper Bush Kit- Fitting Position: Front
- Part of kit: (x)
|
| Front | Strut Top Spacer Kit
Raises vehicle approximately 10-12mm | TRC008-6 | 1 | | $95.00 |
Spacer Sleeve, suspension strut mountStrut Top Spacer KitRaises vehicle approximately 10-12mm OD: 125mm ID: 79mm H: 6mm Need more lift?? If you have added extra accessories to the front of your 4WD and need to correct the ride height, now SuperPro has the solution! The SuperPro Strut Spacer Kit can help with correcting lost ride height on either one side or both sides of your 4WD without having to change springs. - Fitting Position: Front
- Fitment Difficulty
- 3.5hrs Fitment Time
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $35.90 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm  Fitment Difficulty- Fitting Position: Front
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF4030-29K | 1 | | $33.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 28 & 29mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - 1hrs Fitment Time
- Fitting Position: Front
- Fitment Difficulty
- Part of kit: (x)
|
