Front and Rear | Performance Sway Bar Upgrade Kit 26mm and 24mm Front and Rear Adjustable Sway Bars | RCWRX050KIT | 1 | | $1047.00 |
Stabiliser Bar, suspensionPerformance Sway Bar Upgrade Kit26mm and 24mm Front and Rear Adjustable Sway Bars Kit Includes Front and Rear Sway Bars, Front and Rear Sway Bay Links and Rear Mount Brace The Ultimate handling package!
Fitting larger sway bars, has two main effects, vehicle balance in terms of understeer and oversteer, and increased roll resistance. Both of these effects provide increased levels of grip for the vehicle.
This package includes:front and rear adjustable Swaybars and links to: - Eliminate sway bar link flex
- Allow for neutral sway bar positioning
- Maximise all positions on the adjustable Sway Bars
As well as the rear Swaybar Mount Brace Kit to get the best from this package.
This SuperPro Roll Control Sway Bar Kit will make the suspension system and tyres perform better, making the car more responsive while delivering more grip.
It is the best dollar for dollar handling improvement you can make! - Fitting Position: Front and Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Part of kit: (x)
|
Front | 26mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0050FZ-26 | 1 | | $307.00 |
Stabiliser Bar, suspension26mm Heavy Duty 2 Position Blade Adjustable Sway BarThe SuperPro Roll Control two position adjustable front sway bar is 26mm, an upgrade from a 24mm sway bar.
The front delivers a 38% rate increase and when used in conjunction with the SuperPro Roll Control Rear Sway bar this package delivers more grip, improved handling, less understeer and a more balanced vehicle. - Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit - Alloy Caster Increase, includes DuroBall | ALOY0019K | 1 | | $1076.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly Kit - AlloyCaster Increase, includes DuroBall Vehicle Application Information: Left and Right Performance Arm Kit with Caster increase.
Caster increase and reduced arm flex. Corrosion resistant. SuperPro Roll Control Front Lower Control Arms increase the handling of your Subaru Levorg. These arms are built with SuperPro increased caster ability and featuring the new “Grip Dynamics” system which combined improves grip for better handling and performance outcomes. - Alloy light-weight and stronger than original steel – less unsprung weight.
- Caster Increase dialled into rear bushing.
- SuperPro bushings for increased tyre contact patch control, minimal NVH with maximum service life and better handling.
- Suitable for road and track
Vehicle Application Information: - kit does not include ball joints, please re-use OE ball joints
- Fitting time [min]: 180
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front Bush Kit
| SPF3728K | 1 | | $97.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush Kit- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Roll Centre Adjusting Ball Joint
| TRC0002 | 1 | | $319.00 |
Ball JointRoll Centre Adjusting Ball JointRoll Centre Correction Kit Vehicle Application Information: - 2 x Ball Joints & 2 x Tie Rod Ends
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement | TRC4085 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkStandard Replacement 12mm Ball Joint Link
180 Degree opposed
Length 71mm center to center - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1225 | 1 | | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Suits OE Bar Size | SPF4396-24K | 1 | | $53.00 |
Mounting, stabiliser barSway Bar Mount Bush KitSuits OE Bar Size available Sizes 24 & 27mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF4396-27K | 1 | | $53.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 24 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | 24mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0013RZ-24 | 1 | | $347.00 |
Stabiliser Bar, suspension24mm Heavy Duty 3 Position Blade Adjustable Sway Bar- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Lower & Adjustable Toe Control Arm Kit
| TRC0015 | 1 | | $608.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower & Adjustable Toe Control Arm KitVehicle Application Information: - Adjustment Range: +/- 3 Degrees Toe and +/- 2.0 Degrees of Camber
Left and right performance upgrade kit with camber and toe adjustment Vehicle Application Information: - alignment correction - camber & toe adjustable
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower Camber Bolt Kit
| TRC0011CBK | 1 | | $30.00 |
Kit, camber adjustmentControl Arm Lower Camber Bolt KitCamber Bolt Replacement Kit to suit TRC0015 & TRC0011 - Fitting time [min]: 30
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower Complete Adjustable Arm Kit
| TRC0011 | 1 | | $380.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Complete Adjustable Arm KitVehicle Application Information: - +/- 1 Degree Camber Adjustment available
Left and right arm assemblies with SuperPro bushes - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting time [min]: 60
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Bush Kit
| SPF3106K | 1 | | $97.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 240
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Bush Kit - Double Offset
| SPF3107K | 1 | | $181.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower-Outer Bush Kit
| SPF3104K | 1 | | $105.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer Bush KitVehicle Application Information: - to suit vehicles with hyme joint in hub
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Lower-Outer Bush Kit
| SPF3233AK | 1 | | $174.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer Bush KitReplacement Hyme Joint Vehicle Application Information: - Fitting time [min]: 90
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 90
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit
| SPF3100K | 1 | | $195.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit - Double Offset
| SPF3101K | 1 | | $226.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Crossmember Insert Enhancement Kit
| SPF3907K | 1 | | $129.00 |
Bush, sub-frameCrossmember Insert Enhancement KitIncludes upper & lower inserts - Fitting Position: Rear
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential Bracket Mount Bush Kit Rear | SPF3201K | 1 | | $115.00 |
Bush, differential mountDifferential Bracket Mount Bush KitRear - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential Centre Rear Support Void Filler
| SPF4297K | 1 | | $47.00 |
Mounting, differentialDifferential Centre Rear Support Void Filler- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Differential Pinion, Bracket Mount Bush Kit Front | SPF3200K | 1 | | $106.00 |
Bush, differential mountDifferential Pinion, Bracket Mount Bush KitFront - Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4078 | 2 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link to 10.5mm ID Bush
90 Degree opposed
Length 94mm center to center Vehicle Application Information: - Fitting time [min]: 30
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty
| SPF3915K | 1 | | $251.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy DutyNon-adjustable fully articulating performance link set - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Brace Kit
| TRC1005 | 1 | | $116.00 |
Stabiliser Bar, suspensionSway Bar Mount Brace Kit- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Suits OE Bar Size | SPF3108-20K | 1 | | $67.00 |
Mounting, stabiliser barSway Bar Mount Bush KitSuits OE Bar Size available Sizes 14, 15, 16, 18, 19, 20, 21, 22, 23 & 25mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Toe Control Arm Inner Bush Kit
| SPF3099K | 1 | | $148.00 |
Mounting Kit, control/trailing arm mountingToe Control Arm Inner Bush KitVehicle Application Information: - outer bush is ball joint style
- Fitting Position: Rear
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Toe Control Arm Kit - Adjustable
| TRC0007 | 1 | | $252.00 |
Control/Trailing Arm, wheel suspensionToe Control Arm Kit - AdjustableVehicle Application Information: - Adjustment Range: +/- 3 Degrees Toe
Left and Right Toe Arm Alignment Correction Kit Vehicle Application Information: - alignment correction - toe adjustment
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Trailing Arm Front Bush Kit
| SPF3817K | 1 | | $92.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Front Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Rear Bush Kit
| SPF3098K | 1 | | $134.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Rear Bush Kit- Fitting time [min]: 150
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Rear
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|