Front and Rear | Enhancement Bush Kit
| KIT175K | 1 |  | $886.00 |
Suspension KitEnhancement Bush KitKit contains: - Front Control Arm Lower-Inner Bush Kit
- Front Strut Bar To Chassis Mount Bush Kit
- Rear Control Arm Lower-Inner Bush Kit
- Rear Control Arm Lower-Outer Bush Kit
- Rear Control Arm Upper-Inner Rear Bush Kit
- Rear Toe Control Arm Inner Bush Kit
- Rear Trailing Arm Bush Kit
- Fitting Position: Front and Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 600
- Part of kit: (x)
|
Front | 30mm Heavy Duty 4 Position Blade Adjustable Sway Bar
| RC0001FZ-30 | 1 |  | $412.00 |
 Sway Bar Stabiliser Kit30mm Heavy Duty 4 Position Blade Adjustable Sway BarThe Ultimate Handling Package! Fitting larger sway bars has two main effects on - Vehicle balance in terms of understeer and oversteer
- Increased roll resistance
Both these effects provide increased tyre contact and grip for a vehicle. dd in the SuperPro Adjustable sway bar links to: - Eliminate sway bar link flex
- Adjust in neutral sway bar positioning
- Maximize all positions on the adjustable Sway Bars
All this will give the vehicle balanced and upgraded tyre contact and dynamic grip which delivers the ultimate handling package for your Vehicle!
From our testing, this is what we recommend as a good starting point: - Scenario one is to set both bars to the hardest setting and is ideal for a vehicle with standard suspension, wheels and tyres.
- Scenario two is to set the front to the soft setting and the rear to the hardest setting and is ideal for a vehicle with lowered springs, or with larger, wider wheels and tyres.
- Scenario three is to set both bars to the soft setting and is ideal for a vehicle fitted with a coil over kit or sports suspension pack.
- Fitting Position: Front
- Fitting Time [min.]: 210
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Alignment Bush Kit - Front End
| KIT154K | 1 |  | $354.00 |
Suspension KitAlignment Bush Kit - Front EndControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Kit contains: - Front Control Arm Lower-Inner Bush Kit
- Front Strut Bar To Chassis Mount Bush Kit
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 330
- Part of kit: (x)
|
Front | Bump Stop Bush Kit
| SPF2883K | 1 |  | $127.00 |
Bump StopBump Stop Bush KitDesigned to suit lowered vehicles - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Bump Stop Kit
| SPF1833BK | 1 |  | $104.00 |
Bump StopBump Stop Kit2 x Bump Stops & 2 x Boots per kit, 54mm Long x 67.5 Wide x 20-22mm Inside Diameter - Fitting Time [min.]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Caster Arm Complete Assembly Left and Right Replacement Arms for Repair or Performance Upgrade | TRC1001 | 1 |  | $339.90 |
 Track Control ArmCaster Arm Complete AssemblyLeft and Right Replacement Arms for Repair or Performance Upgrade For greater directional stability and Improved turn in.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement.
Designed to Increase or Decrease Caster by +/- 1 Degree These arms utilise the SuperPro bushings and are manufactured from a high strength material and come complete with a heavy duty ball joint. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Control Arm Lower Complete Assembly Left and Right Replacement Arms for Repair or Performance Upgrade | TRC1000 | 1 |  | $267.80 |
Track Control ArmControl Arm Lower Complete AssemblyLeft and Right Replacement Arms for Repair or Performance Upgrade Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement These arms utilise the SuperPro bushings and are manufactured from a high strength material and come complete with a heavy duty ball joint. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.
- Fitting Time [min.]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Bush Kit
| SPF2862K | 1 |  | $182.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitRemove original shell Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Engine Mount Kit Complete set of Engine Mounts to suit V8 Engine | TRC2000 | 1 |  | $252.40 |
Engine MountingEngine Mount KitComplete set of Engine Mounts to suit V8 Engine The Engine Mount has been optimised for longevity, durability and performance by utilising SuperPro Hybrid material to reduce the overall movement of the engine, without compromising NVH. This Engine Mount Kit has some very clever engineering “built in” to produce the best engine mount available for these vehicles. The SuperPro Engine Mounts perform superbly in a standard application, but they really shine in a high performance application. With the movement controlled by the internals of the mount and the superior durability of the material even the highest performance vehicles will benefit from a mount that still maintains the “original” feel!
This mount does it all and is backed by the SuperPro Lifetime Warranty! - Fitting Position: Front
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF2864K | 1 |  | $50.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitPassenger side only, drivers side is solid - Axle alignment required after fitting
- Fitting Time [min.]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Strut Bar Caster Plates
| SPF2859K | 1 |  | $52.00 |
Bush, strut mountStrut Bar Caster PlatesDesigned to increase or decrease Caster by +/- 1 Degree (1 kit required per Side) - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF2858K | 1 |  | $211.00 |
Control Arm-/Trailing Arm BushStrut Bar To Chassis Mount Bush Kit- Fitting Position: Front
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Strut Bolt Replacement Kit
| SPF4960K | 2 |  | $65.00 |
Bolt, axle strutStrut Bolt Replacement Kit- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Strut Top & Bearing
| SPF1590AK | 1 |  | $221.00 |
Bush, strut mountStrut Top & BearingStandard Repair Upgrade Kit.
Kit contains SuperPro Hybrid Mounts, Bearings & Washers. - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Strut Top & Bearing
| SPF1590BK | 1 |  | $284.00 |
Bush, strut mountStrut Top & BearingPerformance Kit.
Kit contains SuperPro Polyurethane Mounts & Bearings. - Fitting Difficulty: difficult
- Fitting Time [min.]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement - LHS | TRC4005L | 1 |  | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement - LHS 10mm Ball Joint Link
125 Degree opposed
Length 300mm - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement - RHS | TRC4005R | 1 |  | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement - RHS 10mm Ball Joint Link
125 Degree opposed
Length 300mm - Fitting Time [min.]: 30
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2863-23K | 1 |  | $48.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 23, 24, 26, 27, 28, 28.7, 29.7 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Time [min.]: 150
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2863-24K | 1 |  | $48.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 23, 24, 26, 27, 28, 28.7, 29.7 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 150
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2863-26K | 1 |  | $48.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 23, 24, 26, 27, 28, 28.7, 29.7 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 150
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | 22mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0001RZ-22 | 1 |  | |
Sway Bar Stabiliser Kit22mm Heavy Duty 3 Position Blade Adjustable Sway Bar22mm Heavy Duty 3 Position Blade Adjustable Sway Bar - Fitting Difficulty: moderate
- Fitting Time [min.]: 120
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Bump Stop Bush Kit
| SPF2883K | 1 |  | $127.00 |
Bump StopBump Stop Bush KitDesigned to suit lowered vehicles - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Bush Kit Rear Arm, Bushing located in arm | SPF2865K | 1 |  | $79.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitRear Arm, Bushing located in arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Rear Arm, Bushing located in arm
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Lower-Outer Bush Kit Rear Arm, Bushing located in knuckle | SPF2866K | 1 |  | $71.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Outer Bush KitRear Arm, Bushing located in knuckle Vehicle Application Information: - will not suit Vehicles with Hyme Joints
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - will not suit Vehicles with Hyme Joints
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner Rear Bush Kit
| SPF2870K | 1 |  | $267.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Rear Bush KitSuits Steel Arm & Bracket
Front bushing is a ball joint style mount Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Differential to Subframe Mount Bush Kit
| SPF2869K | 1 |  | $217.00 |
Bush, differential mountDifferential to Subframe Mount Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Rear | Enhancement Bush Kit - Rear Traction
| KIT176K | 1 |  | $411.00 |
Suspension KitEnhancement Bush Kit - Rear TractionKit includes Void Fillers to suit OEM Bushes only! Kit contains: -
Rear Differential to Subframe Mount Bush Kit -
Rear Subframe to Chassis Spacer on Front Mount Bush Kit -
Rear Subframe Top Void Filler Bush Kit -
Rear Subframe Bottom Void Filler Bush Kit - Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 360
- Part of kit: (x)
|
Rear | Spring Seat Bush Kit Upper | SPF3247K | 1 |  | $46.00 |
Spring CapSpring Seat Bush KitUpper - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Subframe to Chassis Mount Bush Kit
| SPF3918K | 1 |  | $419.00 |
Bush, sub-frameSubframe to Chassis Mount Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 240
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Subframe to Chassis Spacer on Front Mount Bush Kit
| SPF2873K | 1 |  | $54.00 |
Bush, sub-frameSubframe to Chassis Spacer on Front Mount Bush Kitreplaces original rubber bushing - Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Subframe Void Filler Bush Kit Bottom | SPF2871K | 1 |  | $112.00 |
Bush, sub-frameSubframe Void Filler Bush KitBottom Vehicle Application Information: - Void Fillers to suit OEM Bushes only
- Axle alignment required after fitting
- Fitting Time [min.]: 150
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Subframe Void Filler Bush Kit Top | SPF2872K | 1 |  | $74.00 |
Bush, sub-frameSubframe Void Filler Bush KitTop Suits vehicles with voided subframe bushes Vehicle Application Information: - Void Fillers to suit OEM Bushes only
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Rear | Sway Bar Link Cut To Length Link | TRC4004 | 2 |  | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Time [min.]: 30
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Link Standard Replacement | TRC4021 | 2 |  | $32.30 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm Ball Joint Link
180 Degree opposed
Length 108mm center to center - Fitting Time [min.]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF0613-19K | 1 |  | $28.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF0613-20K | 1 |  | $28.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF0613-22K | 1 |  | $28.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Rear | Toe Control Arm Inner & Outer Bush Kit
| SPF3237K | 1 |  | $86.00 |
Bush, control arm mountingToe Control Arm Inner & Outer Bush KitSuits Arm without Hyme Joint - Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Toe Control Arm Inner Bush Kit
| SPF2868K | 1 |  | $57.00 |
Bush, control arm mountingToe Control Arm Inner Bush KitSuits Arm with Hyme Joint in outer position - Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Trailing Arm Bush Kit
| SPF2867K | 1 |  | $118.00 |
Control Arm-/Trailing Arm BushTrailing Arm Bush KitFront Lower Arm
Kit contains front bushings located in the arm & the rear bushings in the knuckle - Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|