| Front | Control Arm Assembly Kit
| TRC0090 | 1 |  | $241.56 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Assembly KitStandard replacement The SuperPro Front Arms are a standard replacement with Bushings and Ball Joint.
Front Lower Control Arms come complete with Hybrid Bushing and heavy duty Ball Joint.
These Bushings allow full articulation and movement without binding and with no increase in noise, vibration or harshness.
SuperPro Tip
Designed and packaged to be replaced as a pair.
SuperPro maintains it is critical for a pair to installed to any application at the same time to avoid any detrimental handling and braking characteristics from a mismatch of bushing material. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Radius Arm Assembly Kit
| TRC0091 | 1 | | $355.85 |
Control Arm/Trailing Arm, wheel suspensionRadius Arm Assembly KitStandard replacement The SuperPro Front Arms are a standard replacement with Bushings and Ball Joint.
Front Caster/Radius Arms utilise a SuperPro Bushing with a heavy duty Ball Joint.
The Bushings allow full articulation and movement without binding and with no increase in noise, vibration or harshness.
SuperPro Tip
Designed and packaged to be replaced as a pair.
SuperPro maintains it is critical for a pair to installed to any application at the same time to avoid any detrimental handling and braking characteristics from a mismatch of bushing material. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Sway Bar Link
LHS - Standard Replacement | TRC4059L | 1 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkLHS - Standard Replacement 10mm Ball Joint Link
97 Degree opposed
Length 339.5mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link
RHS - Standard Replacement | TRC4059R | 1 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkRHS - Standard Replacement 10mm Ball Joint Link
97 Degree opposed
Length 339.5mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10245 | 1 | | $216.81 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable 10mm Ball Joint Adjustable Link
Minimum Length 300 mm - Maximum Length 345 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF2569-26K | 1 |  | $92.92 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 22.5, 23, 24, 26, 27, 28, 29 & 30.8mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit
Motorsport Application | SPF3952-90K | 1 | | $165.79 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitMotorsport Application - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit
| SPF3952K | 1 | | $146.06 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner & Outer Bush Kit - Front Arm
Motorsport Application | SPF3955-90K | 1 | | $226.21 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner & Outer Bush Kit - Front ArmMotorsport Application - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner & Outer Bush Kit - Front Arm
| SPF3955K | 1 | | $221.79 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner & Outer Bush Kit - Front Arm- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Control Arm Upper-Outer Bush Kit - Rear Arm
Motorsport Application | SPF3956-90K | 1 | | $115.43 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Outer Bush Kit - Rear ArmMotorsport Application - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Control Arm Upper-Outer Bush Kit - Rear Arm
| SPF3956K | 1 | | $102.60 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Outer Bush Kit - Rear Arm- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Differential Front Mount Bush Kit
Motorsport Application | SPF3950-90K | 1 | | $216.14 |
Mounting, differentialDifferential Front Mount Bush KitMotorsport Application Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 300
- Part of kit: (x)
|
| Rear | Differential Front Mount Bush Kit
| SPF3950K | 1 | | $188.61 |
Mounting, differentialDifferential Front Mount Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 300
- Part of kit: (x)
|
| Rear | Enhancement Bush Kit
| KIT191RK | 1 |  | $1496.95 |
Mounting, control/trailing armEnhancement Bush KitKit contains: - Rear Control Arm Lower-Inner Bush Kit
- Rear Control Arm Upper-Inner & Outer Bush Kit - Front Arm
- Rear Control Arm Upper-Outer Bush Kit - Rear Arm
- Rear Trailing Arm Lower-Front & Rear Bush Kit
- Rear Toe Control Arm Inner & Outer Bush Kit
- Rear Subframe Front & Rear Bush Kit
- Rear Differential Front Mount Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 600
- Part of kit: (x)
|
| Rear | Subframe Front & Rear Bush Kit
Motorsport Application | SPF3946-90K | 1 | | $584.51 |
Mounting, differentialSubframe Front & Rear Bush KitMotorsport Application - Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Subframe Front & Rear Bush Kit
| SPF3946K | 1 | | $517.51 |
Mounting, differentialSubframe Front & Rear Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 300
- Part of kit: (x)
|
| Rear | Subframe Void Filler Rear Bush Kit
This kit is designed to be used with OEM busing to fill voiding to firm up the rear Subframe | SPF3944K | 1 | | $74.51 |
Bush, sub-frameSubframe Void Filler Rear Bush KitThis kit is designed to be used with OEM busing to fill voiding to firm up the rear Subframe - Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1085 | 1 | | $203.85 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 185 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF2570-16K | 1 | | $54.60 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 13.5, 14, 14.5, 16, 18, 19, 20, 21.5, 22.5 & 25mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner & Outer Bush Kit
Motorsport Application | SPF3954-90K | 1 | | $269.98 |
Mounting Kit, control/trailing arm mountingToe Control Arm Inner & Outer Bush KitMotorsport Application - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner & Outer Bush Kit
| SPF3954K | 1 | | $243.38 |
Mounting Kit, control/trailing arm mountingToe Control Arm Inner & Outer Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Front & Rear Bush Kit
Motorsport Application | SPF3953-90K | 1 | | $269.98 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Front & Rear Bush KitMotorsport Application - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Front & Rear Bush Kit
| SPF3953K | 1 | | $243.38 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Front & Rear Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
