| Front and Rear | Vehicle Enhancement Kit
| KIT159K | 1 |  | $1205.30 |
Mounting, control/trailing armVehicle Enhancement KitKit contains: - Front Control Arm Lower-Inner Front Bush Kit
- Front Control Arm Lower-Inner Rear Bush Kit
- Front Steering Rack & Pinion Mount Bush Kit
- Rear Control Arm Lower-Inner Bush Kit
- Rear Control Arm Lower-Outer Bush Kit
- Rear Control Arm Upper-Inner Bush Kit
- Rear Toe Control Arm Inner Bush Kit
- Rear Trailing Arm Front Bush Kit
- Rear Trailing Arm Rear Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 1080
- Part of kit: (x)
- Front and Rear
- KIT159K
- 1
- 42B, 21T, 4W, 1BOLT
- SuperPro Vehicle Kit
- $1205.30
- More Info
- BUY NOW
|
| Front | 22mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0012FZ-22 | 1 |  | $288.68 |
Stabiliser Bar, chassis22mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees Camber | SPF4351-14K | 1 |  | $54.84 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees Camber Camber Bolt Kit 14mm - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Assembly Kit
| TRC1058 | 1 | | $412.41 |
 Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitThe SuperPro front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made this kit by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
| SPF3091K | 1 | | $161.41 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
standard replacement | SPF5110K | 1 | | $197.10 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kitstandard replacement Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction | SPF5112K | 1 | | $216.83 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 degree caster adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - 60mm OD
- Performance Handling Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit- Single Offset
Alignment Correction | SPF5111K | 1 | | $206.96 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit- Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by re-positioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- 60mm OD
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Kit - Anti Lift
Anti Lift & Caster Increase | TRC3095 | 1 | | $275.73 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Lower-Inner Rear Kit - Anti LiftAnti Lift & Caster Increase Vehicle Application Information: - Anti Lift & Caster Increase
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Engine Pitch Mount Billet Alloy Arm
Positioned under Intercooler | TRC3205 | 1 | | $186.17 |
Engine MountingEngine Pitch Mount Billet Alloy ArmPositioned under Intercooler Vehicle Application Information: - Fitted with SuperPro Bushings
- Positioned under intercooler
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Gearbox Cross Member Isolator Mount
Re-use OE crush tubes, Replaces OEM 41022GA400 | SPF3199K | 1 | | $67.78 |
Bush, Cross MemberGearbox Cross Member Isolator MountRe-use OE crush tubes, Replaces OEM 41022GA400 - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Roll Centre Adjusting Ball Joint
2 x Ball Joints & 2 x Tie Rod Ends | TRC0002 | 1 | | $306.36 |
Ball JointRoll Centre Adjusting Ball Joint2 x Ball Joints & 2 x Tie Rod Ends Roll Centre Correction Kit - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
Does not include removal Tool | SPF2889BK | 1 | | $100.22 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitDoes not include removal Tool - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
This kit includes o.e bush removal tool | SPF2889K | 1 | | $147.73 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitThis kit includes o.e bush removal tool - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4006 | 2 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 10mm Ball Joint Link
60mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1035 | 1 | | $153.19 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 65 mm - Maximum Length 70 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits - Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Link Rod Kit
HD Aluminium links, including SuperPro bushings | TRC4142 | 1 | | $226.24 |
Link/Coupling Rod, stabiliserSway Bar Link Rod KitHD Aluminium links, including SuperPro bushings - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Suits O.E. Sway Bar | SPF3096-20K | 1 | | $49.48 |
Mounting, stabiliserSway Bar Mount Bush KitSuits O.E. Sway Bar available Sizes 18, 19, 20, 21, 22, 23, 24, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Suits Aftermarket Sway Bar | SPF3096-22K | 1 | | $49.48 |
Mounting, stabiliserSway Bar Mount Bush KitSuits Aftermarket Sway Bar available Sizes 18, 19, 20, 21, 22, 23, 24, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF3096-27K | 1 | | $49.48 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 21, 22, 23, 24, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit
Standard Replacement | SPF3106K | 1 | | $93.15 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitStandard Replacement - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit - Double Offset
Offset tubes in kit for adjustment | SPF3107K | 1 | | $173.62 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush Kit - Double OffsetOffset tubes in kit for adjustment A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Lower-Outer Bush Kit
Replaces Hyme Joint in Hub | SPF3104K | 1 | | $100.02 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer Bush KitReplaces Hyme Joint in Hub - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Lower-Outer Bush Kit
Hyme Joint | SPF3233AK | 1 | | $167.18 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer Bush KitHyme Joint Replacement Hyme Joint
40mm housing - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
Standard Replacement | SPF3100K | 1 | | $187.47 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitStandard Replacement - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit - Double Offset
Kit includes Offset Tubes for Adjustment | SPF3101K | 1 | | $216.60 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Double OffsetKit includes Offset Tubes for Adjustment A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Differential Bracket Mount Bush Kit
Rear | SPF3201K | 1 | | $110.57 |
Bush, differential mountDifferential Bracket Mount Bush KitRear - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Differential Centre Rear Support Void Filler
| SPF4297K | 1 | | $44.62 |
Mounting, differentialDifferential Centre Rear Support Void Filler- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Link
Standard Replacement | TRC4078 | 2 | | $36.95 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 10mm Ball Joint Link to 10.5mm ID Bush
90 Degree opposed
Length 94mm center to center - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link Lower Bush Kit
Suited to original link rod, Note upper is ball joint style mount | SPF3109K | 1 | | $94.06 |
Mounting, stabiliserSway Bar Link Lower Bush KitSuited to original link rod, Note upper is ball joint style mount - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount Brace Kit
| TRC1005 | 1 | | $110.76 |
Stabiliser Bar, chassisSway Bar Mount Brace Kit- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Suits O.E. Sway Bar | SPF3108-16K | 1 | | $63.80 |
Mounting, stabiliserSway Bar Mount Bush KitSuits O.E. Sway Bar available Sizes 14, 15, 16, 18, 19, 20, 21, 22, 23 & 25mm Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Suits Aftermarket Sway Bar | SPF3108-22K | 1 | | $63.80 |
Mounting, stabiliserSway Bar Mount Bush KitSuits Aftermarket Sway Bar available Sizes 14, 15, 16, 18, 19, 20, 21, 22, 23 & 25mm Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner Bush Kit
Outer Bushing is Ball Joint Style | SPF3099K | 1 | | $141.72 |
Mounting Kit, control/trailing arm mountingToe Control Arm Inner Bush KitOuter Bushing is Ball Joint Style - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Trailing Arm Front Bush Kit
| SPF3097K | 1 | | $118.45 |
Mounting Kit, control/trailing arm mountingTrailing Arm Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Rear | Trailing Arm Rear Bush Kit
| SPF3098K | 1 | | $128.39 |
Mounting Kit, control/trailing arm mountingTrailing Arm Rear Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
