| Front | Control Arm Lower Inner Bush Kit
| SPF3128K | 1 |  | $280.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 120
- Part of kit: (x)
|
| Front | Control Arm Upper Inner Bush Kit
| SPF3126K | 1 | | $374.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kitcomplete kit for front & rear arms Vehicle Application Information: - OD 46.25mm
- standard replacement
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Upper Inner Bush Kit - Double Offset
| SPF3127K | 1 | | $374.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - Double OffsetVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
complete offset kit for front & rear arms A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - OD 46.25mm
- alignment correction
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 120
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit
| SPF3129K | 1 | | $195.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush KitVehicle Application Information: - Bush OD 65mm
- standard replacement
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Rear
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit - Double Offset
| SPF3131K | 1 | | $195.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Double OffsetVehicle Application Information: - 1 degree caster adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Bush OD 65mm
- alignment correction
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit - Single Offset
| SPF3130K | 1 | | $195.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Single OffsetUse this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Bush OD 65mm
- alignment correction
- Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit - Single Offset
| SPF3130K | 1 | | $195.00 |
 Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Single OffsetVehicle Application Information: - There must be at least 30mm of clearance between the droop stop and the chassis at ride height to avoid any damage to the arms.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Bush OD 65mm
- alignment correction
- Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
