| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees camber | SPF4351-15K | 1 |  |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 15mm - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Front Bush Kit
| SPF3511K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Front Bush Kit- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
Standard replacement | SPF4049K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush KitStandard replacement  Fitment Difficulty 3hrs Fitment Time- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Double Offset
Alignment Correction. Caster Adjustment | SPF4045K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush Kit - Double OffsetAlignment Correction. Caster Adjustment Vehicle Application Information: - up to 2 Degrees Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 3hrs Fitment Time
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Single Offset
Alignment Correction. Use this kit to correct a slight pull | SPF4046K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush Kit - Single OffsetAlignment Correction. Use this kit to correct a slight pull Vehicle Application Information: - 1 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4033 | 2 |  |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 12mm Ball Joint Link
180 degree opposed
Length 360mm center to center - 0.5hrs Fitment Time
 Fitment Difficulty- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12265 | 1 | |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 320 mm - Maximum Length 365 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitment Difficulty
- 1hrs Fitment Time
- Fitting Position: Front
- Part of kit: (x)
|
