Front | Camber Adjusting Bolt Kit Adds +/- 1.5 Degrees camber | SPF4351-14K | 1 |  | $42.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 14mm - Fitting Position: Front
- Part of kit: (x)
|
Front | Camber Adjusting Bolt Kit Adds +/- 1.5 Degrees camber | SPF4351-17K | 1 |  | $49.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 17mm - Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Front Bush Kit Re-use original mounting pin | SPF2663K | 1 |  | $31.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Front Bush KitRe-use original mounting pin Vehicle Application Information: - Re-use original mounting pin
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset Alignment Correction | SPF1267K | 1 |  | $86.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - PS increased DS decrease alignment settings
- Performance Handling Kit
- Axle alignment required after fitting
- Fitting Time [min.]: 240
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset Alignment Correction | SPF1266K | 1 |  | $86.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer’s specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver’s side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit Standard replacement | SPF1265K | 1 |  | $69.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush KitStandard replacement Vehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 240
- Fitting Position: Front
- Part of kit: (x)
|
Front | Engine Steady Mount Bush Kit Large end has 50mm inside diameter | SPF1348K | 1 |  | $58.00 |
Engine MountingEngine Steady Mount Bush KitLarge end has 50mm inside diameter Vehicle Application Information: - Large end has 50mm inside diameter
- Fitting Difficulty: difficult
- Fitting Time [min.]: 90
- Fitting Position: Front
- Part of kit: (x)
|
Front | Engine Steady Mount Bush Kit Large end has 65mm inside diameter | SPF2706K | 1 |  | $80.00 |
Engine MountingEngine Steady Mount Bush KitLarge end has 65mm inside diameter Vehicle Application Information: - Large end has 65mm inside diameter
- Fitting Difficulty: difficult
- Fitting Time [min.]: 120
- Fitting Position: Front
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush (Power Steering) Power steering | SPF1191K | 1 |  | $43.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)Power steering Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement | TRC4016 | 2 |  | $32.30 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm parallel Ball Joint Link
Length 63mm center to center - Fitting Difficulty: moderate
- Fitting Time [min.]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 |  | $133.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Time [min.]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 17, 18, 20, 23mm available | SPF1132-16K | 1 |  | $30.00 |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter 17,18,20,23mm available available Sizes 15, 16, 17, 18, 20, 23 & 24mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 17, 18, 20, 23mm available | SPF1132-17K | 1 |  | $29.00 |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter 17,18,20,23mm available available Sizes 15, 16, 17, 18, 20, 23 & 24mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Time [min.]: 45
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 17, 18, 20, 23mm available | SPF1132-18K | 1 |  | $28.00 |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter 17,18,20,23mm available available Sizes 15, 16, 17, 18, 20, 23 & 24mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 17, 18, 20, 23mm available | SPF1132-20K | 1 |  | $28.00 |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter 17,18,20,23mm available available Sizes 15, 16, 17, 18, 20, 23 & 24mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 17, 18, 20, 23mm available | SPF1132-23K | 1 |  | $29.00 |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter 17,18,20,23mm available available Sizes 15, 16, 17, 18, 20, 23 & 24mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 17, 18, 20, 23mm available | SPF1132-24K | 1 |  | $28.00 |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter 17,18,20,23mm available available Sizes 15, 16, 17, 18, 20, 23 & 24mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Camber Adjusting Bolt Kit Adds +/- 1.5 Degrees camber | SPF4351-15K | 1 |  | $42.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 15mm - Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Outer Bush Kit Fits outer of both front & rear arms | SPF1105K | 1 |  | $86.00 |
Control Arm-/Trailing Arm BushControl Arm Outer Bush KitFits outer of both front & rear arms Vehicle Application Information: - Fits outer of both front & rear arms
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Rear | Sway Bar Link Cut To Length Link | TRC4004 | 2 |  | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 |  | $166.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Time [min.]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Replaces OEM 48818-06051, 15 & 16mm available | SPF2297-18K | 1 |  | $35.00 |
Sway Bar Bush KitSway Bar Mount Bush KitReplaces OEM 48818-06051, 15 & 16mm available - Fitting Difficulty: easy
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Bush Kit
| SPF0823K | 1 |  | $102.00 |
Control Arm-/Trailing Arm BushTrailing Arm Bush Kit- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|