| Front | Control Arm Lower-Inner Bush Kit
| SPF3298K | 1 |  | $188.11 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit
Standard replacement | SPF3296K | 1 | | $164.60 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitStandard replacement - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit - Double Offset
Offset tubes for +/- camber adjustment. Note vehicles with wide wheels may need guard rolled to prevent scrubbing. | SPF3297K | 1 | | $181.98 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Double OffsetOffset tubes for +/- camber adjustment. Note vehicles with wide wheels may need guard rolled to prevent scrubbing. Vehicle Application Information: - 0.5 Degrees of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Front End Repair Kit
| KIT161K | 1 |  | $585.93 |
Mounting, control/trailing armFront End Repair KitKit contains: - Front Control Arm Lower-Inner Bush Kit
- Front Control Arm Upper-Inner Bush Kit
- Front Shock Absorber Lower Bush Kit
- Front Strut Bar To Chassis Mount Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 570
- Part of kit: (x)
|
| Front | Shock Absorber Lower Bush Kit
Bushing located in control arm | SPF3299K | 1 | | $134.21 |
Bush, shock absorberShock Absorber Lower Bush KitBushing located in control arm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
| SPF2715-50K | 1 | | $87.05 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitCheck tube diameter: this kit suited to 50mm. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
| SPF2715-52K | 1 | | $87.05 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitCheck tube diameter: this kit suited to 52mm. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit
Standard replacement, Remove original shell for fitment of this kit | SPF2847K | 1 | | $182.61 |
Bush, strut mountStrut Bar To Chassis Mount Bush KitStandard replacement, Remove original shell for fitment of this kit - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit - Double Offset
Alignment Correction. Remove OE shell for fitment | SPF2849K | 1 | | $182.61 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Double OffsetAlignment Correction. Remove OE shell for fitment A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit - Single Offset
Alignment Correction | SPF2848K | 1 | | $199.69 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 - 0.75 Degrees Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1245 | 1 |  | $190.88 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF2359-26K | 1 | | $41.31 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 26, 30, 32, 34, 35 & 36mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Control Arm Lower-Front Inner Bush Kit
Standard replacement | SPF3316K | 1 | | $109.22 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Inner Bush KitStandard replacement - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Lower-Front Outer Bush Kit
Bushing mounted in hub | SPF3318K | 1 | | $173.62 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Outer Bush KitBushing mounted in hub - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Lower-Rear Outer Bush Kit
Bushing mounted in hub | SPF3322K | 1 | | $198.42 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Outer Bush KitBushing mounted in hub - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
Standard replacement | SPF3313K | 1 | | $161.79 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitStandard replacement - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit - Double Offset
Note: Suggest fitting KIT148K before fitting this kit for camber issues. Offset tubes for adjustment in this kit | SPF3313XK | 1 | | $253.55 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Double OffsetNote: Suggest fitting KIT148K before fitting this kit for camber issues. Offset tubes for adjustment in this kit A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Differential Rear Mount Bush Kit
| SPF3856K | 1 | | $80.74 |
Bush, differential mountDifferential Rear Mount Bush KitContains Rear Differential Mount only Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Rear End Repair Kit
| KIT150K | 1 | | $1113.19 |
Mounting, control/trailing armRear End Repair KitKit contains: - Rear Control Arm Lower-Front Outer Bush Kit
- Rear Control Arm Lower-Inner Front Bush Kit
- Rear Control Arm Lower-Rear Inner Bush Kit
- Rear Control Arm Lower-Rear Outer Bush Kit
- Rear Control Arm Upper-Inner Bush Kit
- Rear Trailing Arm Front Bush Kit
- Rear Trailing Arm Rear Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 780
- Part of kit: (x)
|
| Rear | Shock Absorber Lower Bush Kit
| SPF3322K | 1 | | $198.42 |
Mounting Kit, control/trailing arm mountingShock Absorber Lower Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $190.88 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF3312-20K | 1 | | $63.13 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 20, 21 & 22mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF3312-21K | 1 | | $63.13 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 20, 21 & 22mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Trailing Arm Front Bush Kit
| SPF3314K | 1 | | $151.79 |
Mounting Kit, control/trailing arm mountingTrailing Arm Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Rear | Trailing Arm Rear Bush Kit
Bushing mounted in hub | SPF3315K | 1 | | $117.84 |
Mounting Kit, control/trailing arm mountingTrailing Arm Rear Bush KitBushing mounted in hub - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
