Front and Rear | Enhancement Bush Kit
| KIT177K | 1 | | $939.00 |
Mounting, control/trailing armEnhancement Bush KitVehicle Application Information: - to suit Ute & Cab Chassis
Kit contains: - Front Camber Caster Adjusting Kit
- Front Control Arm Lower-Inner Front Bush Kit
- Front Control Arm Lower-Inner Rear Bush Kit
- Front Control Arm Upper-Inner Bush Kit
- Rear Spring Front Eye Bush Kit
- Rear Spring Rear Bush Kit All
- Fitting time [min]: 780
- Axle alignment required after fitting
- Fitting Position: Front and Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | 30mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0002FZ-30 | 1 | | $412.00 |
Stabiliser Bar, suspension30mm Heavy Duty 2 Position Blade Adjustable Sway BarVehicle Application Information: - does not suit RTV Vehicles
The Ultimate Handling Package! Fitting larger sway bars has two main effects on:- Vehicle balance in terms of understeer and oversteer
- Increased roll resistance Both these effects provide increased tyre contact and grip for a vehicle.
Add in the SuperPro Adjustable sway bar links to:- Eliminate sway bar link flex
- Adjust in neutral sway bar positioning
- Maximize all positions on the adjustable Sway Bars
All this will give the vehicle balanced and upgraded tyre contact and dynamic grip which delivers the ultimate handling package for your Vehicle! From our testing, this is what we recommend as a good starting point:- Scenario one is to set both bars to the hardest setting and is ideal for a vehicle with standard suspension, wheels and tyres.
- Scenario two is to set the front to the soft setting and the rear to the hardest setting and is ideal for a vehicle with lowered springs, or with larger, wider wheels and tyres.
- Scenario three is to set both bars to the soft setting and is ideal for a vehicle fitted with a coil over kit or sports suspension pack.
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Bump Stop Bush Kit
| SPF2044K | 1 | | $51.00 |
Bump StopBump Stop Bush Kit2 x Bump Stops & 2 x Caps per Kit
50mm Long x 56.3 Wide x 14-18mm Inside Diameter - Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Camber Caster Adjusting Kit
| SPF1600-V8K | 2 | | $207.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting KitTo suit V8 & XR6
Note: Mounting nuts inside guard, kits include shim plates. - Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Camber Caster Adjusting Kit
| SPF1600K | 2 | | $174.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting KitIncludes shims - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 150
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Camber Caster Adjusting Kit
| SPF1600SL-V8K | 2 | | $203.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting KitVehicle Application Information: - Super low option Includes shims
To suit V8 & XR6
Note: Mounting nuts inside guard, kits include shim plates. Vehicle Application Information: - Super low option Includes shims
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 150
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Camber Caster Adjusting Kit
| SPF1600SLK | 2 | | $182.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting KitSuper low option
Includes shims - Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Camber Caster Adjusting Shim Kit
| SPF1600-1.6SK | 1 | | $37.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting Shim Kit1.6 mm shims (10 pack) - Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Camber Caster Adjusting Shim Kit
| SPF1600-3SK | 1 | | $58.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting Shim Kit3mm shims (10 pack) - Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Camber Caster Adjusting Shim Kit
| SPF1600-6SK | 1 | | $75.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting Shim Kit6mm shims (10 pack) - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit
| SPF2283-10K | 1 | | $74.00 |
Spring SeatCoil Spring Spacer Bush KitA=101mm B=52.6mm C=10mm D=31.5mm E=70.4mm, Helical Spring Seat Vehicle Application Information: - Lower position, OE strut only, Raises vehicle 14mm
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: SPF2283-20K (x1)
|
Front | Coil Spring Spacer Bush Kit
| SPF2283-20K | 1 | | $104.00 |
Spring SeatCoil Spring Spacer Bush KitA=101mm B=52.6mm C=20mm D=31.5mm E=70.4mm, Helical Spring Seat Vehicle Application Information: - Lower position, OE strut only, raises vehicle approx. 28mm
- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: SPF2283-10K (x1)
|
Front | Control Arm Lower Assembly Kit
| TRC1103 | 1 | | $713.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade Our front lower control arm kit for the Ford AU, BA & BF series has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1103 by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.Vehicle Application Information: - standard replacement
- Includes Ball Joint
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Front Bush Kit
| SPF1838K | 1 | | $203.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 210
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF1839K | 1 | | $113.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Upper Inner Alignment Bush Kit
| KIT199K | 1 | | $392.00 |
Mounting, control/trailing armControl Arm Upper Inner Alignment Bush KitAlignment Correction - Camber Adjustable
Suits Standard Height Vehicles Kit contains: - Front Control Arm Upper-Inner Bush Kit
- Front Camber Caster Adjusting Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 270
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper Inner Alignment Bush Kit
| KIT200K | 1 | | $407.00 |
Mounting, control/trailing armControl Arm Upper Inner Alignment Bush KitAlignment Correction - Camber Adjustable
Suits Lowered Vehicles Kit contains:- Front Control Arm Upper-Inner Bush Kit
- Front Camber Caster Adjusting Kit - Super Low Option
- Fitting time [min]: 270
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper Inner Bush Kit
| SPF1887K | 1 | | $88.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Shock Absorber Lower Bush Kit
| SPF0299K | 1 | | $68.00 |
Bush, shock absorberShock Absorber Lower Bush KitBush located in lower control arm - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF2527K | 1 | | $46.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitLHS only
Re-use OE crush tube
RHS solid mount metal bush - Fitting Position: Front
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Strut Top Cap
| RS008 | 2 | | $122.00 |
Suspension Strut MountingStrut Top Cap- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Position: Front
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4009L | 1 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkVehicle Application Information: - does not suit RTV Vehicles
10mm Ball Joint Link
90 Degree opposed
Length 88mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4009R | 1 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkVehicle Application Information: - does not suit RTV Vehicles
10mm Ball Joint Link
90 Degree opposed
Length 88mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4023L | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar LinkVehicle Application Information: 10mm Ball Joint Link
90 degree opposed
Length 105mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4023R | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar LinkVehicle Application Information: 10mm Ball Joint Link
90 degree opposed
Length 105mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 | | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: - does not suit RTV Vehicles
10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar To Chassis Bush Kit
| SPF3231-18K | 1 | | $55.00 |
Mounting, stabiliser barSway Bar To Chassis Bush KitMeasure bar diameter 18, 23, 24, 25, 26, 27, 28, 30 & 31mm available Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Sway Bar To Chassis Bush Kit
| SPF3231-23K | 1 | | $55.00 |
Mounting, stabiliser barSway Bar To Chassis Bush KitVehicle Application Information: Measure bar diameter 18, 23, 24, 25, 26, 27, 28, 30 & 31mm available Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Sway Bar To Chassis Bush Kit
| SPF3231-24K | 1 | | $55.00 |
Mounting, stabiliser barSway Bar To Chassis Bush KitVehicle Application Information: - to suit XR6 O.E sway bar size
Measure bar diameter 18, 23, 24, 25, 26, 27, 28, 30 & 31mm available Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Fish Plate Spacer Kit, 6mm
| SPF2404K | 1 | | $126.00 |
Bushing, leaf springFish Plate Spacer Kit, 6mmVehicle Application Information: - Use with thicker than original leaf spring pack
- Fitting Position: Rear
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Leaf Spring Bush Kit - 51mm Round Front Eye
| KIT047RK | 1 | | $289.00 |
Mounting, control/trailing armLeaf Spring Bush Kit - 51mm Round Front EyeKit contains: - Rear Leaf Spring Saddle Mount Bush Kit
- Rear Spring Front Eye Bush Kit (51mm OD)
- Rear Spring Rear Bush Kit All
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Leaf Spring Bush Kit - Oval Style Front Eye
| KIT048R-WK | 1 | | $359.00 |
Mounting, control/trailing armLeaf Spring Bush Kit - Oval Style Front EyeKit contains: - Rear Leaf Spring Saddle Mount Bush Kit
- Rear Spring Front Eye Bush Kit (Oval Style)
- Rear Spring Rear Bush Kit All
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Leaf Spring Saddle Mount Bush Kit
| SPF0101K | 1 | | $117.00 |
Bushing, leaf springLeaf Spring Saddle Mount Bush KitVehicle Application Information: - does not suit Cab Chassis & 1 Tonner
- Fitting Position: Rear
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Spring Front Eye Bush Kit
| SPF0571K | 1 | | $203.00 |
Bushing, leaf springSpring Front Eye Bush KitVehicle Application Information: Vehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Spring Front Eye Bush Kit
| SPF1744K | 1 | | $157.00 |
Bushing, leaf springSpring Front Eye Bush KitVehicle Application Information: - to suit Ute & Cab Chassis
Vehicle Application Information: - round style bush
- 54mm OD bush
- Tube 19 x 13 x 84
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Rear | Spring Front Eye Bush Kit
| SPF3823K | 1 | | $149.00 |
Bushing, leaf springSpring Front Eye Bush KitVehicle Application Information: - to suit Ute & Cab Chassis
Vehicle Application Information: - Performance Kit
- round style bush
- 54mm OD bush
- Fitting Position: Rear
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Spring Rear Bush Kit All
| SPF2233K | 1 | | $79.00 |
Bushing, leaf springSpring Rear Bush Kit AllVehicle Application Information: - 35mm OD, 14.3mm ID, 31mm length
- Fitting Difficulty: easy
- Fitting time [min]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Torque Rod Bush Kit
| SPF3922K | 1 | | $99.00 |
Mounting Kit, control/trailing arm mountingTorque Rod Bush KitVehicle Application Information: - to suit RTV Ute & Cab Chassis
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|