Front and Rear | Enhancement Bush Kit
| KIT175K | 1 | | $1195.00 |
Mounting, control/trailing armEnhancement Bush KitKit contains: - Front Control Arm Lower-Inner Bush Kit
- Front Strut Bar To Chassis Mount Bush Kit
- Rear Control Arm Lower-Inner Bush Kit
- Rear Control Arm Lower-Outer Bush Kit
- Rear Control Arm Upper-Inner Rear Bush Kit
- Rear Toe Control Arm Inner Bush Kit
- Rear Trailing Arm Bush Kit
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 600
- Fitting Position: Front and Rear
- Part of kit: (x)
|
Front | 30mm Heavy Duty 4 Position Blade Adjustable Sway Bar
| RC0001FZ-30 | 1 | | $491.00 |
Stabiliser Bar, suspension30mm Heavy Duty 4 Position Blade Adjustable Sway BarThe Ultimate Handling Package! Fitting larger sway bars has two main effects on - Vehicle balance in terms of understeer and oversteer
- Increased roll resistance
Both these effects provide increased tyre contact and grip for a vehicle. dd in the SuperPro Adjustable sway bar links to: - Eliminate sway bar link flex
- Adjust in neutral sway bar positioning
- Maximize all positions on the adjustable Sway Bars
All this will give the vehicle balanced and upgraded tyre contact and dynamic grip which delivers the ultimate handling package for your Vehicle!
From our testing, this is what we recommend as a good starting point: - Scenario one is to set both bars to the hardest setting and is ideal for a vehicle with standard suspension, wheels and tyres.
- Scenario two is to set the front to the soft setting and the rear to the hardest setting and is ideal for a vehicle with lowered springs, or with larger, wider wheels and tyres.
- Scenario three is to set both bars to the soft setting and is ideal for a vehicle fitted with a coil over kit or sports suspension pack.
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Alignment Bush Kit - Front End
| KIT154K | 1 | | $478.00 |
Mounting, control/trailing armAlignment Bush Kit - Front EndControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Kit contains: - Front Control Arm Lower-Inner Bush Kit
- Front Strut Bar To Chassis Mount Bush Kit
- Fitting time [min]: 330
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 330
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Bump Stop Bush Kit
| SPF2883K | 1 | | $171.00 |
Bump StopBump Stop Bush KitDesigned to suit lowered vehicles - Fitting time [min]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 150
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Caster Arm Complete Assembly
| TRC1001 | 1 | | $428.00 |
Control/Trailing Arm, wheel suspensionCaster Arm Complete AssemblyVehicle Application Information: - designed to increase or decrease caster by +/- 1 degree
Left and Right Replacement Arms for Repair or Performance Upgrade fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement.
For greater directional stability and Improved turn in.
These arms utilise the SuperPro bushings and are manufactured from a high strength material and come complete with a heavy duty ball joint. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.
Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Complete Assembly
| TRC1000 | 1 | | $307.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Complete AssemblyLeft and Right Replacement Arms for Repair or Performance Upgrade fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement These arms utilise the SuperPro bushings and are manufactured from a high strength material and come complete with a heavy duty ball joint. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.
Vehicle Application Information: - Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Bush Kit
| SPF2862K | 1 | | $246.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitRemove original shell Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF2864K | 1 | | $67.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitPassenger side only, drivers side is solid - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Strut Bar Caster Plates
| SPF2859K | 1 | | $70.00 |
Bush, strut mountStrut Bar Caster PlatesDesigned to increase or decrease Caster by +/- 1 Degree (1 kit required per Side) - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 60
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF2858K | 1 | | $285.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Strut Bolt Replacement Kit
| SPF4960K | 2 | | $89.00 |
Bolt, axle strutStrut Bolt Replacement Kit- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Strut Top & Bearing
| SPF1590BK | 1 | | $295.00 |
Bush, strut mountStrut Top & BearingPerformance Kit.
Kit contains SuperPro Polyurethane Mounts & Bearings. - Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Bump Stop Bush Kit
| SPF2883K | 1 | | $171.00 |
Bump StopBump Stop Bush KitDesigned to suit lowered vehicles - Fitting time [min]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 150
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Bush Kit Rear Arm, Bushing located in arm | SPF2865K | 1 | | $107.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitRear Arm, Bushing located in arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Rear Arm, Bushing located in arm
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower Outer Bush Kit Rear Arm, Bushing located in knuckle | SPF2866K | 1 | | $96.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Outer Bush KitRear Arm, Bushing located in knuckle Vehicle Application Information: - will not suit vehicles with Hyme Joints
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - will not suit Vehicles with Hyme Joints
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 180
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Rear Bush Kit
| SPF2870K | 1 | | $361.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Rear Bush KitSuits Steel Arm & Bracket
Front bushing is a ball joint style mount Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential to Subframe Mount Bush Kit
| SPF2869K | 1 | | $293.00 |
Bush, differential mountDifferential to Subframe Mount Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Enhancement Bush Kit - Rear Traction
| KIT176K | 1 | | $554.00 |
Mounting, control/trailing armEnhancement Bush Kit - Rear TractionKit includes Void Fillers to suit OEM Bushes only! Kit contains: -
Rear Differential to Subframe Mount Bush Kit -
Rear Subframe to Chassis Spacer on Front Mount Bush Kit -
Rear Subframe Top Void Filler Bush Kit -
Rear Subframe Bottom Void Filler Bush Kit - Fitting time [min]: 360
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Spring Seat Bush Kit
| SPF3247K | 1 | | $62.00 |
Spring SeatSpring Seat Bush KitVehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Subframe to Chassis Mount Bush Kit
| SPF3918K | 1 | | $565.00 |
Bush, sub-frameSubframe to Chassis Mount Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 240
- Part of kit: (x)
|
Rear | Subframe to Chassis Spacer on Front Mount Bush Kit
| SPF2873K | 1 | | $73.00 |
Bush, sub-frameSubframe to Chassis Spacer on Front Mount Bush Kitreplaces original rubber bushing - Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Subframe Void Filler Bush Kit - Bottom
| SPF2871K | 1 | | $151.00 |
Bush, sub-frameSubframe Void Filler Bush Kit - BottomVehicle Application Information: - void fillers to suit OEM bushes only
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
Rear | Subframe Void Filler Bush Kit - Top
| SPF2872K | 1 | | $100.00 |
Bush, sub-frameSubframe Void Filler Bush Kit - TopSuits vehicles with voided subframe bushes Vehicle Application Information: - void fillers to suit OEM bushes only
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Toe Control Arm Inner Bush Kit
| SPF2868K | 1 | | $77.00 |
Mounting, control/trailing armToe Control Arm Inner Bush KitSuits Arm with Hyme Joint in outer position - Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Bush Kit
| SPF2867K | 1 | | $159.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Bush KitFront Lower Arm
Kit contains front bushings located in the arm & the rear bushings in the knuckle - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|