| Front and Rear | Enhancement Bush Kit
For Rear Control Arm Lower-Inner & Outer Kit, measure arm housing ID, this kit suited to 38mm inside diameter housing. | KIT179K | 1 |  | $633.90 |
Mounting, control/trailing armEnhancement Bush KitFor Rear Control Arm Lower-Inner & Outer Kit, measure arm housing ID, this kit suited to 38mm inside diameter housing. Kit contains: - Front Control Arm Inner-Front Bush Kit
- Front Control Arm Lower-Inner Rear Bush Kit - Anti Lift & Double Offset
- Front Steering Rack & Pinion Mount Bush Kit
- Rear Control Arm Lower-Inner & Outer Bush Kit
- Rear Trailing Arm Lower-Front Bush Kit
- Rear Trailing Arm Lower-Rear Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 990
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Part of kit: (x)
|
| Front and Rear | Enhancement Bush Kit
For Rear Control Arm Lower-Inner & Outer Kit, measure arm housing ID, this kit suited to 34mm inside diameter housing. | KIT192K | 1 | | $853.90 |
Mounting, control/trailing armEnhancement Bush KitFor Rear Control Arm Lower-Inner & Outer Kit, measure arm housing ID, this kit suited to 34mm inside diameter housing. Kit contains: - Front Control Arm Inner-Front Bush Kit
- Front Control Arm Lower-Inner Rear Bush Kit - Anti Lift & Double Offset
- Front Steering Rack & Pinion Mount Bush Kit
- Rear Control Arm Lower-Inner & Outer Bush Kit
- Rear Trailing Arm Lower-Front Bush Kit
- Rear Trailing Arm Lower-Rear Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 960
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Part of kit: (x)
|
| Front | 22mm Heavy Duty 2 Position Blade Adjustable Sway Bar
Suits MY01-04 & MY07 | RC0037FZ-22 | 1 |  | $417.12 |
Stabiliser Bar, chassis22mm Heavy Duty 2 Position Blade Adjustable Sway BarSuits MY01-04 & MY07 - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
Suits MY01-04 & MY07 | RC0037FZ-24 | 1 | | $417.12 |
Stabiliser Bar, chassis24mm Heavy Duty 2 Position Blade Adjustable Sway BarSuits MY01-04 & MY07 - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Alloy Lower Control Arm Assembly - Includes Anti Lift Bushes in Rear Alloy Bracket
Left and Right Performance Arm Kit. Suits vehicles from 10/2002 -2007 | ALOY0004K | 1 | | $1001.57 |
 Control Arm/Trailing Arm, wheel suspensionAlloy Lower Control Arm Assembly - Includes Anti Lift Bushes in Rear Alloy BracketLeft and Right Performance Arm Kit. Suits vehicles from 10/2002 -2007 New SuperPro Roll Control WRX Supaloy Front Lower Control Arms increase the handling of your WRX to better than that of the STI.
The arms are built with SuperPro Anti-Lift and increased caster ability and featuring the new “Grip Dynamics” system which combined improves grip for better handling and performance outcomes.
Features & Details - Alloy light-weight and stronger than original WRX steel Arm – less unsprung weight.
- Direct Replacement for STi Alloy Arm
- SuperPro Anti-Lift Kit included with arm.
- Anti-Lift dialled into rear bushing.
- SuperPro bushings for increased tyre contact patch control, minimal NVH with maximum service life and better handling.
- Suitable for road and track.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Alloy Lower Control Arm Assembly - Includes Anti Lift Bushes in Rear Alloy Bracket
Left and Right Performance Arm Kit. Suits vehicles from 10/2000 - 09/2002 | ALOY0008K | 1 | | $1001.57 |
 Control Arm/Trailing Arm, wheel suspensionAlloy Lower Control Arm Assembly - Includes Anti Lift Bushes in Rear Alloy BracketLeft and Right Performance Arm Kit. Suits vehicles from 10/2000 - 09/2002 New SuperPro Roll Control WRX Supaloy Front Lower Control Arms increase the handling of your WRX to better than that of the STI.
The arms are built with SuperPro Anti-Lift and increased caster ability and featuring the new “Grip Dynamics” system which combined improves grip for better handling and performance outcomes.
Alloy light-weight and stronger than original steel – less unsprung weight. - SuperPro Anti-Lift Kit included with arm.
- Anti-Lift dialled into rear bushing.
- SuperPro bushings for increased tyre contact patch control, minimal NVH with maximum service life and better handling.
- Suitable for road and track.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees Camber | SPF4351-14K | 1 |  | $54.84 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees Camber Camber Bolt Kit 14mm - Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
| Front | Control Arm Inner-Front Bush Kit
Tube length 61mm, suits Vehicles from 10/2002 - on | SPF2429K | 1 | | $101.10 |
Mounting Kit, control/trailing arm mountingControl Arm Inner-Front Bush KitTube length 61mm, suits Vehicles from 10/2002 - on - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
Tube length 55mm, suits Vehicles from 10/2000 - 09/2002 | SPF1390K | 1 | | $100.63 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush KitTube length 55mm, suits Vehicles from 10/2000 - 09/2002 Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Standard replacement | SPF1387K | 1 | | $216.37 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitStandard replacement Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Anti Lift & Caster Increase | SPF1388AK | 1 | | $271.16 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetAnti Lift & Caster Increase Vehicle Application Information: - Anti Lift & Caster Increase both sides 2 x offset bushings per kit
- Performance Handling Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
Alignment Correction | SPF1388K | 1 | | $271.16 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Alloy Bracket Mount Kit
Motorsport Only. Special Harder Duro. Anti Lift & Caster increase. | ALOY1388-90AK | 1 | | $318.15 |
Bushing, control armControl Arm Lower-Rear Alloy Bracket Mount KitMotorsport Only. Special Harder Duro. Anti Lift & Caster increase. Control Lower Arm Rear Mount Vehicle Application Information: - Anti Lift & Caster Increase
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Alloy Bracket Mount Kit
Anti Lift & Caster Increase | ALOY1388AK | 1 | | $294.58 |
Bushing, control armControl Arm Lower-Rear Alloy Bracket Mount KitAnti Lift & Caster Increase Control Lower Arm Rear Mount A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Anti Lift & Caster Increase
- Performance Handling Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Engine Pitch Mount Billet Alloy Arm
Positioned under intercooler. | TRC3205 | 1 | | $186.17 |
Engine MountingEngine Pitch Mount Billet Alloy ArmPositioned under intercooler. Vehicle Application Information: - Fitted with SuperPro Bushings
- Positioned under intercooler
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Gear-linkage Support Bar-Front Bush Kit
6 Speed - Replaces original bushing 35035FE010, 40mm outside diameter bushing | SPF2462K | 1 | | $47.94 |
Mounting, control/trailing armGear-linkage Support Bar-Front Bush Kit6 Speed - Replaces original bushing 35035FE010, 40mm outside diameter bushing Vehicle Application Information: - Competition use recommended
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Gearbox Cross Member Isolator Mount
| SPF2358K | 1 | | $72.44 |
Bush, Cross MemberGearbox Cross Member Isolator Mount- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 150
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Roll Centre Adjusting Ball Joint
2 x Ball Joints & 2 x Tie Rod Ends | TRC0002 | 1 | | $306.36 |
Ball JointRoll Centre Adjusting Ball Joint2 x Ball Joints & 2 x Tie Rod Ends Roll Centre Correction Kit - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush (Power Steering)
This kit includes o.e bush removal tool | SPF2648K | 1 | | $147.73 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)This kit includes o.e bush removal tool - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
Does not include removal tool | SPF2648BK | 1 | | $100.22 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitDoes not include removal tool - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4006 | 2 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 10mm Ball Joint Link
60mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1035 | 1 | | $153.19 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 65 mm - Maximum Length 70 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits - Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1617-19K | 1 | | $47.11 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 17, 18, 19, 20, 21, 22, 23, 24, 25.4 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | 22mm Heavy Duty 3 Position Blade Adjustable Sway Bar
Suits Models with O.E Ball Joint Link | RC0037RZ-22 | 1 | | $342.89 |
Stabiliser Bar, chassis22mm Heavy Duty 3 Position Blade Adjustable Sway BarSuits Models with O.E Ball Joint Link - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | 22mm Heavy Duty 3 Position Blade Adjustable Sway Bar
Suits10/02-09/03 STi Models, Suits Models with O.E Plastic Style or TRC2925 Link | RC0038RZ-22 | 1 | | $355.85 |
Stabiliser Bar, chassis22mm Heavy Duty 3 Position Blade Adjustable Sway BarSuits10/02-09/03 STi Models, Suits Models with O.E Plastic Style or TRC2925 Link - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | 24mm Heavy Duty 3 Position Blade Adjustable Sway Bar
Suits 10/03 - 09/07 Sti Models, Suits Models with O.E Ball Joint Link | RC0037RZ-24 | 1 | | $331.11 |
Stabiliser Bar, chassis24mm Heavy Duty 3 Position Blade Adjustable Sway BarSuits 10/03 - 09/07 Sti Models, Suits Models with O.E Ball Joint Link - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | 24mm Heavy Duty 3 Position Blade Adjustable Sway Bar
Suits10/02-09/03 STi Models, Suits Models with O.E Plastic Style or TRC2925 Link | RC0038RZ-24 | 1 | | $355.85 |
Stabiliser Bar, chassis24mm Heavy Duty 3 Position Blade Adjustable Sway BarSuits10/02-09/03 STi Models, Suits Models with O.E Plastic Style or TRC2925 Link - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees Camber | SPF4351-14K | 1 | | $54.84 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees Camber Camber Bolt Kit 14mm - Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner & Outer Bush Kit
Measure arm housing ID upon removal of OE rubber bushing, this kit suited to 34mm inside diameter housing. | SPF1463K | 1 | | $267.22 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner & Outer Bush KitMeasure arm housing ID upon removal of OE rubber bushing, this kit suited to 34mm inside diameter housing. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner & Outer Bush Kit
Measure arm housing ID upon removal of OE rubber bushing, this kit suited to 38mm inside diameter housing. | SPF2808K | 1 | | $327.91 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner & Outer Bush KitMeasure arm housing ID upon removal of OE rubber bushing, this kit suited to 38mm inside diameter housing. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Crossmember Supplement Washers Bush Kit
Race or Track only, possible NVH in street car. | SPF2701K | 1 | | $72.14 |
Bush, sub-frameCrossmember Supplement Washers Bush KitRace or Track only, possible NVH in street car. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Differential Outrigger Support Mount Bush Kit
| SPF4350K | 1 | | $206.52 |
Mounting, differentialDifferential Outrigger Support Mount Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Differential Support Bracket Mount Bush Kit
Competition use recommended | SPF2433K | 1 | | $93.37 |
Bush, differential mountDifferential Support Bracket Mount Bush KitCompetition use recommended Vehicle Application Information: - Competition use recommended
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF2791-18K | 1 | | $48.33 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 14, 16, 17, 18, 19, 20, 21, 22 & 24mm - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Front Bush Kit
| SPF1491K | 1 | | $116.63 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Rear Bush Kit
40mm OD | SPF2810K | 1 | | $92.44 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Rear Bush Kit40mm OD - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
