Front | Alignment Bush Kit - Front End
| KIT153K | 1 |  | $334.74 |
Mounting, control/trailing armAlignment Bush Kit - Front EndKit contains: - Front Strut Bar To Chassis Mount Bush Kit
- Front Strut Bar To Lower Control Arm Bush Kit
- Front Control Arm Lower-Inner Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 330
- Part of kit: (x)
|
Front | Bump Stop Bush Kit Lowered suspension only | SPF2392K | 1 |  | $241.48 |
Bump StopBump Stop Bush KitLowered suspension only Bump Stop 93mm long, 55/27mm wide, 63mm high. Base Plate 150 x 65mm, bolt hole centre to centre 125mm - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Camber Adjusting Bolt Kit Adds +/- 1.5 Degree Camber | SPF4351-14K | 1 |  | $54.84 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degree Camber Camber Bolt Kit 14mm - Fitting Position: Front
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit
| SPF2365-10K | 2 |  | $39.64 |
Spring CapCoil Spring Spacer Bush KitA=164mm B=127.5mm C=10mm Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit
| SPF2365-5K | 2 |  | $27.04 |
Spring CapCoil Spring Spacer Bush KitA=164mm B=127.5mm C=5mm Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit Left and Right Arms for Standard Replacement and Repair Upgrade | TRC1104 | 1 |  | $318.14 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade Vehicle Application Information: These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. - Axle alignment required after fitting
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Bush Kit
| SPF1232K | 1 |  | $85.34 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: KIT153K (x1)
|
Front | Spring Insulator Bush Kit Upper replacement | SPF2498K | 1 |  | $77.28 |
Spring CapSpring Insulator Bush KitUpper replacement A=165mm B=128.7mm C=5.5mm D=13.5mm E=138mm, Helical Spring Seat Vehicle Application Information: - Upper replacement of OE # 92002882
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Spring Insulator Bush Kit Upper replacement of OEM 92002882 | SPF2498K | 1 |  | $77.28 |
Spring CapSpring Insulator Bush KitUpper replacement of OEM 92002882 A=165mm B=128.7mm C=5.5mm D=13.5mm E=138mm, Helical Spring Seat Vehicle Application Information: - Upper replacement of OE # 92002882
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF1632K | 1 |  | $30.29 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF2339-90K | 1 |  | $371.29 |
Kit, caster adjustmentStrut Bar To Chassis Mount Bush KitAdjustable Caster Kit - Heavy Duty Option
Alignment Correction - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF2339EK | 1 |  | $219.82 |
Bush, strut mountStrut Bar To Chassis Mount Bush KitNon Adjustable Kit - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF2339K | 1 |  | $278.00 |
Kit, caster adjustmentStrut Bar To Chassis Mount Bush KitAdjustable Caster Kit
Alignment Correction Super Pro Adjustable Strut Bar To Chassis Mount Bush Kit is considered one of those “must have” bushing replacements for the GMH vehicles. From the factory, the Strut bar is secured to the front subframe with a soft, fluid-filled bushing that breaks down prematurely. Its job is to absorb most of the braking load while locating the wheel and control arm for caster. However, when this bushing breaks down, it results in excessive wheel movement under braking resulting in degraded braking performance, pedal feel and increased tyre wear.The SuperPro Adjustable Strut Bar To Chassis Mount Bush Kit correct and prevent this issue and can provides increased caster adjustment for improved handling. It is the perfect repair, repair upgrade or performance solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: KIT153K (x1)
|
Front | Strut Bar To Lower Control Arm Bush Kit
| SPF0756CK | 1 |  | $67.68 |
Bush, strut mountStrut Bar To Lower Control Arm Bush KitComfort option to be used with SPF2339K
Suited to cast steel arms - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Strut Bolt Replacement Kit
| SPF4960K | 2 |  | $84.66 |
Bolt, axle strutStrut Bolt Replacement Kit- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Strut Top & Bearing
| SPF1590AK | 1 |  | $286.33 |
Bush, strut mountStrut Top & BearingStandard Repair Upgrade Kit.
Kit contains SuperPro Hybrid Mounts, Bearings & Washers. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Strut Top & Bearing
| SPF1590BK | 1 |  | $367.76 |
Bush, strut mountStrut Top & BearingPerformance Kit.
Kit contains SuperPro Polyurethane Mounts & Bearings. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Sway Bar Link VY models only, does not suit VZ models | TRC4003 | 2 |  | $44.99 |
Stabiliser Bar, chassisSway Bar LinkVY models only, does not suit VZ models 10mm Ball Joint/Bush Link
Length 210 mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit Strut end only, Vehicle has ball joint type end at sway bar, must re-use all original washers | SPF2755SK | 1 |  | $15.22 |
Bush, shock absorberSway Bar Link Bush KitStrut end only, Vehicle has ball joint type end at sway bar, must re-use all original washers - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit
| SPF3570K | 1 |  | $169.73 |
Stabiliser Bar, chassisSway Bar Link Kit10mm Ball Joint/Bush Link
Length 210 mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Sway Bar Link Rod Replacement Bush Kit
| SPF0967RK | 1 |  | $51.08 |
Mounting, stabiliserSway Bar Link Rod Replacement Bush Kit- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 90
- Part of kit: (x)
|
Front | Sway Bar Link To Lower Arm Bush Kit
| SPF2755SK | 1 |  | $15.22 |
Bush, shock absorberSway Bar Link To Lower Arm Bush Kit- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1453-30K | 1 |  | $41.42 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Rear | Bump Stop Bush Kit Lowered suspension only | SPF2392K | 1 |  | $241.48 |
Bump StopBump Stop Bush KitLowered suspension only Bump Stop 93mm long, 55/27mm wide, 63mm high. Base Plate 150 x 65mm, bolt hole centre to centre 125mm - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Spring Front Eye Bush Kit
| SPF2382K | 1 |  | $149.74 |
Bushing, leaf springSpring Front Eye Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Spring Rear Bush Kit All Complete rear leaf spring bushing kit | KIT109K | 1 |  | $191.28 |
Bushing, leaf springSpring Rear Bush Kit AllComplete rear leaf spring bushing kit These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to "wander" all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 210
- Part of kit: (x)
|
Rear | Spring Rear Bush Kit All
| SPF2231-8K | 1 |  | $62.78 |
Bushing, leaf springSpring Rear Bush Kit All- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Measure bar diameter, 14mm available | SPF2384-14K | 1 |  | $37.37 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter, 14mm available - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|