Front | Coil Spring Spacer Bush Kit
| SPF1735-10K | 2 | | $41.00 |
Spring SeatCoil Spring Spacer Bush KitA=108mm B=65mm C=10mm Vehicle Application Information: - Raises vehicle approximately 10mm
- re-use original spacer
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Part of kit: SPF1735-30K (x1)
|
Front | Coil Spring Spacer Bush Kit
| SPF1735-15K | 2 | | $42.00 |
Spring SeatCoil Spring Spacer Bush KitA=108mm B=65mm C=15mm Vehicle Application Information: - raises vehicle approximately 15mm
- re-use original spacer
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: SPF1735-10K (x1)
|
Front | Coil Spring Spacer Bush Kit
| SPF1735-30K | 2 | | $72.00 |
Spring SeatCoil Spring Spacer Bush KitA=108mm B=65mm C=30mm Vehicle Application Information: - raises vehicle approximately 30mm
- re-use original spacer
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: SPF1735-15K (x1)
|
Front | Panhard Rod To Diff Mount Bush Kit Diff end only, Chassis end is ball joint type, remove outer shell | SPF1081K | 1 | | $44.00 |
Bush, panhard rodPanhard Rod To Diff Mount Bush KitDiff end only, Chassis end is ball joint type, remove outer shell Vehicle Application Information: - Diff end only (Chassis end is ball joint type)
- Fitting time [min]: 90
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link - Heavy Duty Extended with Quick Release Pin | TRC4315 | 1 | | $489.45 |
Mounting Kit, stabiliser link/coupling rodSway Bar Link - Heavy Duty Extendedwith Quick Release Pin Vehicle Application Information: - heavy duty adjustable with quick release pin to suit 75 - 100mm lifted vehicles
Heavy-duty quick-release sway bar links offer an easy way to enhance your vehicle's on-road stability while allowing for swift disconnection of the sway bar to achieve maximum off-road articulation. These links feature a greaseable bearing, multiple collet options and adjustable length, making them versatile for various applications and highly durable over time.
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF1723K | 1 | | $82.00 |
Mounting, stabiliser barSway Bar Link Bush Kit- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2030-30K | 1 | | $70.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 30 & 34mm Vehicle Application Information: - Fitting time [min]: 45
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2030-34K | 1 | | $70.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 30 & 34mm Vehicle Application Information: - Fitting time [min]: 45
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Trailing Arm Assembly Kit - Lower
| TRC1193 | 1 | | $475.00 |
Control/Trailing Arm, wheel suspensionTrailing Arm Assembly Kit - LowerLeft and Right Arms for lifted vehicles This trailing arm kit for the Jeep Wrangler TJ is designed to correct the pinion angle on a lifted vehicle. Offering an adjustable solution, while improving both on- and offroad performance. Designed as an upgrade and not just as a repair solution! Supplied as a complete kit and fully assembled with SuperPro bushings. We have developed this arm kit to be by far the best choice on the market. Fitted with SuperPro bushes, these suspension arms have been optimised for longevity, durability and performance without any unwanted NVH. SuperPro Control & Trailing Arms are perfectly suited as an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
Fully developed by our Australian based R&D team.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. Vehicle Application Information: - off-car adjustable for pinion angle correction, suits lifted vehicles up to 100mm
- Fitting time [min]: 150
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Trailing Arm Assembly Kit - Upper
| TRC1194 | 1 | | $407.00 |
Control/Trailing Arm, wheel suspensionTrailing Arm Assembly Kit - UpperLeft and Right Arms for lifted vehicles This trailing arm kit for the Jeep Wrangler TJ is designed to correct the pinion angle on a lifted vehicle. Offering an adjustable solution, while improving both on- and offroad performance. Designed as an upgrade and not just as a repair solution! Supplied as a complete kit and fully assembled with SuperPro bushings. We have developed this arm kit to be by far the best choice on the market. Fitted with SuperPro bushes, these suspension arms have been optimised for longevity, durability and performance without any unwanted NVH. SuperPro Control & Trailing Arms are perfectly suited as an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
Fully developed by our Australian based R&D team.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. Vehicle Application Information: - off-car adjustable for pinion angle correction, suits lifted vehicles up to 100mm
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Trailing Arm Lower Bush Kit Where tube is 66.5mm long, New outer shells supplied in this kit. | SPF1264K | 1 | | $348.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush KitWhere tube is 66.5mm long, New outer shells supplied in this kit. Vehicle Application Information: - Where tube is 66.5mm long New outer shells supplied in this kit.
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Trailing Arm Lower Bush Kit Must re-use original outer shell, Original inner tube is 66.5 long. | SPF2856K | 1 | | $202.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush KitMust re-use original outer shell, Original inner tube is 66.5 long. Vehicle Application Information: - re-use original outer shell, original inner tube is 66.5 long.
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Trailing Arm Upper Bush Kit New outer shells supplied in kit | SPF1263K | 1 | | $232.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush KitNew outer shells supplied in kit Vehicle Application Information: - New outer shells supplied in kit
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Trailing Arm Upper Bush Kit Re-use original factory outer shell | SPF2842K | 1 | | $136.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush KitRe-use original factory outer shell Vehicle Application Information: - Re-use original factory outer shell
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Coil Spring Spacer Bush Kit Re-use original spacer | SPF1996-10K | 2 | | $63.00 |
Spring SeatCoil Spring Spacer Bush KitRe-use original spacer A=160mm B=65mm C=10mm - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 90
- Part of kit: (x)
|
Rear | Coil Spring Spacer Bush Kit Re-use original spacer | SPF1996-30K | 2 | | $144.00 |
Spring SeatCoil Spring Spacer Bush KitRe-use original spacer A=160mm B=65mm C=30mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Panhard Rod - Adjustable
| TRC1196 | 1 | | $329.00 |
Mounting, panhard rodPanhard Rod - AdjustableSuperPro Adjustable Panhard Rod - a must-have for avid 4x4 enthusiasts looking for a heavy-duty solution to reset axle location and rectify wheel alignment on raised vehicles. Designed in Australia and fitted with SuperPro bushings, this rod minimizes NVH and maximizes longevity. It's worth noting that it's off-car adjustable, ensuring ease of use. Made with heavy-duty DOM steel tube and forged ends for added strength, this adjustable panhard rod features SuperPro bushings, providing quiet and maintenance-free operation.
Vehicle Application Information: - off car adjustable
- Heavy Duty
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Panhard Rod Bush Kit Replaces OEM 2261460 "Both Ends" | SPF2343K | 1 | | $70.00 |
Bush, panhard rodPanhard Rod Bush KitReplaces OEM 2261460 "Both Ends" Vehicle Application Information: - Replaces OE # 2261460 Both Ends
- Fitting time [min]: 90
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Link Bush Kit
| SPF1225K | 1 | | $83.00 |
Mounting, stabiliser barSway Bar Link Bush Kit- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1138-26K | 1 | | $52.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 15, 16, 18, 19, 21, 22, 23, 24, 25, 26, 28, 29 & 30mm Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1138-30K | 1 | | $52.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 15, 16, 18, 19, 21, 22, 23, 24, 25, 26, 28, 29 & 30mm Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Assembly Kit - Lower
| TRC1193 | 1 | | $475.00 |
Control/Trailing Arm, wheel suspensionTrailing Arm Assembly Kit - LowerLeft and Right Arms for lifted vehicles This trailing arm kit for the Jeep Wrangler TJ is designed to correct the pinion angle on a lifted vehicle. Offering an adjustable solution, while improving both on- and offroad performance. Designed as an upgrade and not just as a repair solution! Supplied as a complete kit and fully assembled with SuperPro bushings. We have developed this arm kit to be by far the best choice on the market. Fitted with SuperPro bushes, these suspension arms have been optimised for longevity, durability and performance without any unwanted NVH. SuperPro Control & Trailing Arms are perfectly suited as an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
Fully developed by our Australian based R&D team.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. Vehicle Application Information: - off-car adjustable for pinion angle correction, suits lifted vehicles up to 100mm
- Fitting time [min]: 150
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Assembly Kit - Upper
| TRC1195 | 1 | | $514.00 |
Control/Trailing Arm, wheel suspensionTrailing Arm Assembly Kit - UpperLeft and Right Arms for lifted vehicles This trailing arm kit for the Jeep Wrangler TJ is designed to correct the pinion angle on a lifted vehicle. Offering an adjustable solution, while improving both on- and offroad performance. Designed as an upgrade and not just as a repair solution! Supplied as a complete kit and fully assembled with SuperPro bushings. We have developed this arm kit to be by far the best choice on the market. Fitted with SuperPro bushes, these suspension arms have been optimised for longevity, durability and performance without any unwanted NVH. SuperPro Control & Trailing Arms are perfectly suited as an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
Fully developed by our Australian based R&D team.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. Vehicle Application Information: - off-car adjustable for pinion angle correction, suits lifted vehicles up to 100mm
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
Rear | Trailing Arm Lower Bush Kit Where tube is 66.5mm long, New outer shells supplied in this kit. | SPF1264K | 1 | | $348.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush KitWhere tube is 66.5mm long, New outer shells supplied in this kit. Vehicle Application Information: - Where tube is 66.5mm long New outer shells supplied in this kit.
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Lower Bush Kit Must re-use original outer shell, Original inner tube is 66.5 long. | SPF2856K | 1 | | $202.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush KitMust re-use original outer shell, Original inner tube is 66.5 long. Vehicle Application Information: - re-use original outer shell, original inner tube is 66.5 long.
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Upper Bush Kit New outer shells supplied in kit | SPF1263K | 1 | | $232.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush KitNew outer shells supplied in kit Vehicle Application Information: - New outer shells supplied in kit
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Upper Bush Kit Re-use original factory outer shell | SPF2842K | 1 | | $136.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush KitRe-use original factory outer shell Vehicle Application Information: - Re-use original factory outer shell
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|