Front | Camber Adjusting Bolt Kit Adds +/- 1.5 Degrees camber | SPF4351-12K | 1 |  | $50.59 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 12mm - Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Front Bush Kit
| SPF1126K | 1 |  | $87.55 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit Standard setting. Slide on mount peg | SPF1366K | 1 |  | $187.17 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitStandard setting. Slide on mount peg Vehicle Application Information: - 2 x Standard bushings per kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit Standard setting. Locking nut on mount peg | SPF1999K | 1 |  | $125.40 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitStandard setting. Locking nut on mount peg Vehicle Application Information: - 2 x Standard bushings per kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset Alignment Correction. Slide on mount peg | SPF1368K | 1 |  | $187.09 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction. Slide on mount peg Vehicle Application Information: - 2 x offset bushings in kit
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset Alignment Correction. Locking nut on mount peg. | SPF2001K | 1 |  | $201.62 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction. Locking nut on mount peg. A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset Alignment Correction. Slide on mount peg | SPF1367K | 1 |  | $187.09 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction. Slide on mount peg Vehicle Application Information: - 1 x offset bushing & 1 x standard bushing in kit
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset Alignment Correction. Locking nut on mount peg. | SPF2000K | 1 |  | $278.09 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction. Locking nut on mount peg. Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush (Power Steering) Complete kit both sides | SPF2304K | 1 |  | $82.06 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)Complete kit both sides - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush (Power Steering) Left Hand Side Only | SPF2304LK | 1 |  | $33.19 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)Left Hand Side Only - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush (Power Steering) Right Hand Side Only | SPF2304RK | 1 |  | $81.22 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)Right Hand Side Only - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement | TRC4016 | 2 |  | $36.95 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 10mm parallel Ball Joint Link
Length 63mm center to center - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12160 | 1 |  | $216.81 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 210 mm - Maximum Length 260 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 22, 23, 24mm available | SPF1801-20K | 1 |  | $35.46 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 22,23,24mm available - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 22, 23, 24mm available | SPF1801-22K | 1 |  | $35.46 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 22,23,24mm available - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 22, 23, 24mm available | SPF1801-23K | 1 |  | $35.46 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 22,23,24mm available - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 22, 23, 24mm available | SPF1801-24K | 1 |  | $35.46 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 22,23,24mm available - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1801-27K | 1 |  | $39.39 |
Mounting, stabiliserSway Bar Mount Bush Kit- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Trailing Arm Upper Bush Kit Wagon only | SPF0593K | 2 |  | $93.61 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush KitWagon only - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Bush Kit
| SPF2116K | 1 |  | $71.82 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Control Arm Lower-Outer Bush Kit Replaces rubber encased hyme joint style bush | SPF1953K | 1 |  | $135.61 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer Bush KitReplaces rubber encased hyme joint style bush - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner Bush Kit
| SPF2115K | 1 |  | $94.47 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Control Arm Upper-Outer Bush Kit Bush located in outer hub assembly | SPF2114K | 1 |  | $96.25 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Outer Bush KitBush located in outer hub assembly - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 |  | $153.19 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Trailing Arm Lower-Front Bush Kit Wagon only | SPF0423K | 1 |  | $111.63 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Front Bush KitWagon only - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | Trailing Arm Lower-Front Bush Kit Sedan | SPF2117K | 1 |  | $121.24 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Front Bush KitSedan - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Trailing Arm Lower-Rear Bush Kit Wagon only | SPF0168K | 1 |  | $86.20 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Rear Bush KitWagon only - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | Trailing Arm Lower-Rear Bush Kit Sedan only, bushing located in outer hub assembly | SPF2118K | 1 |  | $70.37 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Rear Bush KitSedan only, bushing located in outer hub assembly - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Trailing Arm Upper Bush Kit Wagon only | SPF0593K | 2 |  | $93.61 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush KitWagon only - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Fitting Position: Front
- Part of kit: (x)
|