| Front | Bump Stop Bush Kit
| SPF2044K | 1 |  | $35.22 |
Bump StopBump Stop Bush Kit2 x Bump Stops & 2 x Caps per Kit
50mm Long x 56.3 Wide x 14-18mm Inside Diameter - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Assembly Kit
Left and Right Replacement Arms for Repair or Performance Upgrade to suit Vehicles up to 04/2009 | TRC1013 | 1 |  | $320.00 |
Control ArmControl Arm Assembly KitLeft and Right Replacement Arms for Repair or Performance Upgrade to suit Vehicles up to 04/2009 Includes left and right arms, all bushings and ball joints These arms utilise the SuperPro bushings and are manufactured from a high strength material and come complete with a heavy duty ball joint.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. - Axle alignment required after fitting
 Fitment Difficulty- Fitting Position: Front
 1hrs Fitment Time- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Bush Kit
| SPF3572K | 1 | | $101.03 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
 Fitment Difficulty- Fitting Position: Front
- 3hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit
| SPF3372K | 1 | | $93.03 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 4hrs Fitment Time
- Part of kit: (x)
|
| Front | Differential Mount Bush Kit - Left Side - SuperPro Hybrid
| SPF4897K | 1 | | $290.16 |
Mounting, differentialDifferential Mount Bush Kit - Left Side - SuperPro HybridStandard & Performance option with Hybrid Technology - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 6hrs Fitment Time
- Part of kit: (x)
|
| Front | Differential Mount Bush Kit - Right Side - SuperPro Hybrid
| SPF4769K | 1 | | $109.51 |
Mounting, differentialDifferential Mount Bush Kit - Right Side - SuperPro HybridStandard & Performance option with Hybrid Technology - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 4hrs Fitment Time
- Part of kit: (x)
|
| Front | Radius Arm Assembly Kit
Standard Replacement and Repair Upgrade to suit Vehicles up to 04/2009 | TRC1014 | 1 | | $305.00 |
Control ArmRadius Arm Assembly KitStandard Replacement and Repair Upgrade to suit Vehicles up to 04/2009 Vehicle Application Information: Standard replacement
Includes left and right arms and all bushings These arms utilise the SuperPro bushings and are manufactured from a high strength material.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. Vehicle Application Information: - suits Vehicles up to 04/2009
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Radius Arm Assembly Kit
Standard Replacement and Repair Upgrade to suit Vehicles from 04/2009 on | TRC1105 | 1 | | $400.00 |
Control ArmRadius Arm Assembly KitStandard Replacement and Repair Upgrade to suit Vehicles from 04/2009 on Vehicle Application Information: These arms utilise the SuperPro bushings and are manufactured from a high strength material.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. Vehicle Application Information: - suits Vehicles from 04/2009 on
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Radius Arm To Chassis Mount Bush Kit
standard replacement, to suit Vehicles up to 04/2009 | SPF2636K | 1 | | $235.15 |
Bush, strut mountRadius Arm To Chassis Mount Bush Kitstandard replacement, to suit Vehicles up to 04/2009 - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Radius Arm To Chassis Mount Bush Kit
standard replacement, to suit Vehicles from 04/2009 on | SPF5274K | 1 | | $235.00 |
Control Arm-/Trailing Arm BushRadius Arm To Chassis Mount Bush Kitstandard replacement, to suit Vehicles from 04/2009 on - Axle alignment required after fitting
- Fitting Position: Front
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Shock Absorber Lower Bush Kit
| SPF0299K | 1 | | $46.70 |
Bush, shock absorberShock Absorber Lower Bush KitBush located in lower control arm - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2hrs Fitment Time
- Part of kit: (x)
|
| Front | Strut Top Cap
| RS008 | 2 | | $104.50 |
Suspension Strut MountingStrut Top Cap- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4026 | 2 | | $39.50 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 12mm Horizontal Ball Joint Link with 12mm Vertical Ball Joint
Length 360mm center to center  Fitment Difficulty- Fitting Position: Front
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF2743-29K | 1 | | $41.23 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 20, 24, 27, 29 & 30mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Fitting Position: Rear
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF2743-30K | 1 | | $41.23 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 20, 24, 27, 29 & 30mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Blade Control Arm Front Kit
Competition use
Remove original shell for fitment | SPF3182K | 1 | | $305.44 |
Control Arm-/Trailing Arm BushBlade Control Arm Front KitCompetition use
Remove original shell for fitment - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Blade Control Arm Front Kit
Standard replacement
Remove original shell for fitment | SPF3229K | 1 | | $198.74 |
Control Arm-/Trailing Arm BushBlade Control Arm Front KitStandard replacement
Remove original shell for fitment - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Blade Control Arm Kit
Left and Right Replacement Arms for Repair or Performance Upgrade | TRC1012 | 1 | | $365.00 |
Control ArmBlade Control Arm KitLeft and Right Replacement Arms for Repair or Performance Upgrade The Ford Falcon & Territory Rear Blade Bushing has proven to be a big problem with severe durability, ride and handling problems.
The Blade Arm Bushing essentially pushes the car forward and stops the car during braking.
It sees extremely high loads in excess of 15KN.
The Original Ford Blade bush is soft in all directions, which is not good for performance and durability, now there is a far superior option.
SuperPro Blade Arm can: - Eliminate the acceleration lag due to soft bushes, resulting in a more responsive car, with better traction and a more positive braking feel.
- Offer a progressive rate bushing, which for the end consumer can be summed up as a plush ride through the suburbs with a 'sports performance' experience at the wheel when you need it.
- Deliver massive durability increase and superior value for money.
- Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Bump Stop Bush Kit
To suit lowered & standard height vehicles | SPF2787K | 1 | | $40.41 |
Bump StopBump Stop Bush KitTo suit lowered & standard height vehicles Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit
| SPF3142K | 1 | | $86.60 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitBushing located in larger arm which coil spring is located on Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Lower-Outer Bush Kit
Bushing located in hub, larger arm which coil spring is located on | SPF3234K | 1 | | $119.18 |
Control Arm-/Trailing Arm BushControl Arm Lower-Outer Bush KitBushing located in hub, larger arm which coil spring is located on Replacement Hyme joint
46.9mm housing - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Upper Assembly Kit
Complete Arm Assemblies with Standard SuperPro Bushings | TRC1106 | 1 | | $320.00 |
Control ArmControl Arm Upper Assembly KitComplete Arm Assemblies with Standard SuperPro Bushings Left and Right Arms for Standard Replacement and Repair Upgrade - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
| SPF3187K | 1 | | $67.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitStandard replacement
Remove original shell before fitment Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit - Double Offset
Up to 1 degree +/- adjustment. | SPF2413K | 1 | | $152.07 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kit - Double OffsetUp to 1 degree +/- adjustment. This kit is designed for a lowered vehicle. Once lowered, these vehicles do not have enough adjustment in the factory camber adjusters to correct the resulting negative camber. Being offset allows the length of this arm to be altered and, once installed, increases the range of the factory adjustment. It is advisable to carry out a wheel alignment prior to fitment and follow the fitting instructions to achieve the desired outcome.
Control arm bushes also stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
SuperPro Bushing solve this issue as and add the ability to 'tune' the wheel alignment to suit the specific requirements of vehicle and driver. Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Upper-Outer Bush Kit
Bushing located in arm | SPF3233K | 1 | | $120.46 |
Control Arm-/Trailing Arm BushControl Arm Upper-Outer Bush KitBushing located in arm Replacement Hyme Joint
40mm housing - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Differential Centre Rear Support Bush Kit
SX only | SPF2654-70K | 1 | | $83.14 |
Bush, differential mountDifferential Centre Rear Support Bush KitSX only 75mm OD
Comfort Option
Bushing mounted in Sub Frame Vehicle Application Information: - Bolt Hole off-center
- Steel outer shell type replacement bushing
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: KIT187K (x1)
|
| Rear | Differential Centre Rear Support Bush Kit
SX only | SPF2654K | 1 | | $90.56 |
Bush, differential mountDifferential Centre Rear Support Bush KitSX only 75mm OD
Sports/Performance Option
Bushing mounted in Sub Frame Vehicle Application Information: - Bolt Hole off-center
- Steel outer shell type replacement bushing
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Differential Centre Rear Support Bush Kit - SuperPro Hybrid
SY - onwards | SPF3232PK | 1 | | $166.61 |
Mounting, differentialDifferential Centre Rear Support Bush Kit - SuperPro HybridSY - onwards 90mm OD
Standard & Performance option with Hybrid Technolgy
Bushing mounted in Subframe SuperPro Hybrid Bushings are the most technologically advanced Differential Bushings ever produced. Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Differential Pinion Bracket Mount Bush Kit - SuperPro Hybrid
Bushing mounted in subframe.
Standard & Performance option with Hybrid Technolgy | SPF3148PK | 1 | | $290.16 |
Mounting, differentialDifferential Pinion Bracket Mount Bush Kit - SuperPro Hybrid
Bushing mounted in subframe.
Standard & Performance option with Hybrid Technolgy SuperPro Hybrid Bushings are the most technologically advanced Differential Bushings ever produced. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Differential Support Bush Kit - Performance Option
SX only | KIT197K | 1 |  | $342.65 |
Mounting, differentialDifferential Support Bush Kit - Performance OptionSX only Kit contains: - Rear Differential Pinion Bracket Mount Bush Kit
- Rear Differential Centre Rear Support Bush Kit
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
| Rear | Differential Support Bush Kit - Standard Option
SX only | KIT187K | 1 | | $335.97 |
Mounting, differentialDifferential Support Bush Kit - Standard OptionSX only Kit contains: - Rear Differential Pinion, Bracket Mount Bush Kit
- Rear Differential Centre Rear Support Bush Kit
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
| Rear | Differential Support Bush Kit - SuperPro Hybrid
SY onwards | KIT210K | 1 | | $396.00 |
Mounting, differentialDifferential Support Bush Kit - SuperPro HybridSY onwards SuperPro Hybrid Bushings are the most technologically advanced Differential Bushings ever produced.Kit contains: - Differential Pinion Bracket Mount Bush Kit
- Differential Centre Rear Support Bush Kit
Standard & Performance option with SuperPro Hybrid Technolgy.
All Bushings mounted in subframe. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
| Rear | Shock Absorber Upper Bush Kit
suits Vehicles up to 03/2009 | SPF2251K | 1 | | $48.04 |
Bush, shock absorberShock Absorber Upper Bush Kitsuits Vehicles up to 03/2009 - Fitment Difficulty
- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Seat Bush Kit
Raises vehicle aprox 10mm | SPF3183-10K | 2 | | $162.63 |
Spring CapSpring Seat Bush KitRaises vehicle aprox 10mm - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Seat Bush Kit
Raises vehicle aprox 5mm | SPF3183-5K | 2 | | $137.61 |
Spring CapSpring Seat Bush KitRaises vehicle aprox 5mm - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Seat Bush Kit
Standard replacement
2 x kits required for top & bottom | SPF3183K | 2 | | $109.85 |
Spring CapSpring Seat Bush KitStandard replacement
2 x kits required for top & bottom - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Link
Standard Replacement | TRC4001 | 2 | | $39.50 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement - Fitment Difficulty
- Fitting Position: Rear
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Link Bush Kit
Upper Bushes Only | SPF4802BK | 1 | | $32.10 |
Sway Bar Stabiliser KitSway Bar Link Bush KitUpper Bushes Only - Fitment Difficulty
- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Link Bush Kit
| SPF4802K | 1 | | $71.91 |
Sway Bar Stabiliser KitSway Bar Link Bush Kit- Fitment Difficulty
- Fitting Position: Rear
- 2hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF2743-29K | 1 | | $41.23 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 20, 24, 27, 29 & 30mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF2743-30K | 1 | | $41.23 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 20, 24, 27, 29 & 30mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner Bush Kit
Smaller pressed metal front arm | SPF3187K | 1 | | $67.00 |
Control Arm-/Trailing Arm BushToe Control Arm Inner Bush KitSmaller pressed metal front arm Standard replacement
Remove original shell before fitment Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Toe Control Arm Outer Bush Kit
Bushing located in arm | SPF3233K | 1 | | $120.46 |
Control Arm-/Trailing Arm BushToe Control Arm Outer Bush KitBushing located in arm Replacement Hyme Joint
40mm housing - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
|
