| Front | Control Arm Lower Front Bush Kit
| SPF1390K | 1 |  | $105.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Standard replacement | SPF1387K | 1 | | $226.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitStandard replacement Vehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
| SPF1388AK | 1 | | $283.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetVehicle Application Information: - 1 degree caster adjustment available
Vehicle Application Information: - Anti Lift & Caster Increase both sides 2 x offset bushings per kit
- alignment correction
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
Alignment Correction | SPF1388K | 1 | | $283.00 |
 Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction There must be at least 30mm of clearance between the droop stop and the chassis at ride height to avoid any damage to the arms. Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Roll Centre Adjusting Ball Joint
| TRC0002 | 1 |  | $319.00 |
Ball JointRoll Centre Adjusting Ball JointRoll Centre Correction Kit Vehicle Application Information: - 2 x Ball Joints & 2 x Tie Rod Ends
- Fitting Position: Front
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
| SPF1835K | 1 | | $52.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - 25mm Bracket width passenger side
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
| SPF1972K | 1 | | $46.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - 30mm bracket width passenger side
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link Bush Kit
| SPF1200K | 1 | | $87.00 |
Mounting, stabiliser barSway Bar Link Bush KitVehicle Application Information: - to suit O.E Strut eye size only
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Sway Bar Link Rod Kit
HD Aluminium links, including SuperPro bushings Not suited to STi | TRC2924 | 1 | | $224.00 |
Link/Coupling Rod, stabiliser barSway Bar Link Rod KitHD Aluminium links, including SuperPro bushings Not suited to STi HD Aluminium links to suit vehicles with alloy arms. Kit includes SuperPro bushings. Vehicle Application Information: - HD Aluminium links & Bushings
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Fitting time [min]: 90
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1617-20K | 1 | | $49.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 17, 18, 19, 20, 21, 22, 23, 24, 25.4 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1617-21K | 1 | | $49.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 17, 18, 19, 20, 21, 22, 23, 24, 25.4 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1617-22K | 1 | | $49.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 17, 18, 19, 20, 21, 22, 23, 24, 25.4 & 27mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner & Outer Bush Kit
| SPF1463K | 1 | | $278.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner & Outer Bush KitMeasure arm housing ID upon removal of OE rubber bushing, this kit suited to 34mm inside diameter housing. - Axle alignment required after fitting
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Crossmember Supplement Washers Bush Kit
| SPF1978K | 1 | | $61.00 |
Bush, sub-frameCrossmember Supplement Washers Bush KitVehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Differential Support Bracket Mount Bush Kit
| SPF2664K | 1 | | $150.00 |
Bush, differential mountDifferential Support Bracket Mount Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link Bush Kit
| SPF1384AK | 1 | | $109.00 |
Mounting, stabiliser barSway Bar Link Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 90
- Fitting time [min]: 90
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link Rod Kit
| TRC2925 | 1 | | $229.00 |
Link/Coupling Rod, stabiliser barSway Bar Link Rod KitHD Aluminium links, including SuperPro bushings Vehicle Application Information: - HD Aluminium links & Bushings
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Fitting time [min]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1383-20K | 1 | | $38.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25.4 & 29mm Vehicle Application Information: - Fitting time [min]: 45
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1383-21K | 1 | | $38.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25.4 & 29mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 45
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1383-22K | 1 | | $38.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25.4 & 29mm Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1383-24K | 1 | | $38.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25.4 & 29mm Vehicle Application Information: - Fitting time [min]: 45
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Front Bush Kit
| SPF1491K | 1 | | $122.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Front Bush Kit- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Rear Bush Kit
| SPF1907K | 1 | | $115.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Rear Bush KitVehicle Application Information: - Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
