Front | Camber Adjusting Bolt Kit
| SPF4351-16K | 1 | | $67.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitCamber Bolt Kit 16mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Inner Front & Rear Bush Kit
| SPF2306K | 1 | | $313.00 |
Mounting Kit, control/trailing arm mountingControl Arm Inner Front & Rear Bush KitVehicle Application Information: - Fitting time [min]: 210
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Inner Front & Rear Bush Kit - Offset
| SPF2308K | 1 | | $335.00 |
Mounting Kit, control/trailing arm mountingControl Arm Inner Front & Rear Bush Kit - OffsetVehicle Application Information: Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit
| TRC1094 | 1 | | $348.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade The SuperPro front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with proprietary SuperPro bushings. We have made this kit by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.Vehicle Application Information: - standard replacement
- kit does not include ball joints, please re-use OE ball joints
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Front Bush Kit
| SPF2306FK | 1 | | $222.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush KitVehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF2307K | 1 | | $122.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2183-18K | 1 | | $50.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 18, 20, 22, 23, 24, 27.5 & 28mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2183-20K | 1 | | $50.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 18, 20, 22, 23, 24, 27.5 & 28mm Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Rear Bush Kit
| SPF2318K | 1 | | $100.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 150
- Part of kit: (x)
|
Rear | Control Arm Lower Outer Bush Kit
| SPF3195K | 1 | | $160.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Outer Bush KitKit includes 4 crush tubes to suit 12mm & 14mm bolts - Fitting time [min]: 240
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit
| SPF2310K | 1 | | $111.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit
| SPF2311K | 1 | | $155.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Outer Bush Kit
| SPF2310K | 1 | | $111.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Outer Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Outer Bush Kit
| SPF2311K | 1 | | $155.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Outer Bush KitVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4034L | 1 | | $39.00 |
Mounting Kit, stabiliser link/coupling rodSway Bar Link10mm Ball Joint Link
65 degree opposed
Length 89mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4034R | 1 | | $39.00 |
Mounting Kit, stabiliser link/coupling rodSway Bar Link10mm Ball Joint Link
65 degree opposed
Length 89mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025A | 1 | | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable 10mm Ball Joint Adjustable Link
Minimum Length 85 mm - Maximum Length 100 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2403-18K | 1 | | $70.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 14, 15, 18, 19, 20 & 22mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2403-19K | 1 | | $71.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 14, 15, 18, 19, 20 & 22mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|