Front and Rear | Alignment & Enhancement Kit GT-T | KIT126K | 1 |  | $776.00 |
Suspension KitAlignment & Enhancement KitGT-T Kit contains: - Front Control Arm Upper-Outer Bush Kit - Double Offset
- Front Strut Bar To Chassis Mount Bush Kit - Double Offset
- Front Steering Rack & Pinion Mount Bush Kit
- Rear Control Arm Lower-Inner Bush Kit
- Rear Control Arm Upper-Inner or Outer Bush Kit - Double Offset
- Fitting Time [min.]: 960
- Fitting Position: Front and Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | 27mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0062FZ-27 | 1 |  | $343.00 |
Sway Bar Stabiliser Kit27mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting Position: Front
- Fitting Time [min.]: 120
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Bush Kit
| SPF1483K | 1 |  | $205.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitVehicle Application Information: - Stepped shell 38mm to 40mm outside diameter
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 210
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush Kit Standard replacement | SPF3153K | 1 |  | $136.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitStandard replacement - Fitting Position: Front
- Fitting Time [min.]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush Kit - Double Offset Alignment Correction. Camber Adjustable | SPF3154K | 1 |  | $211.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kit - Double OffsetAlignment Correction. Camber Adjustable Vehicle Application Information: - 0.5 Degrees of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Time [min.]: 240
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Upper-Outer Bush Kit Standard Replacement | SPF3610K | 1 |  | $85.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Outer Bush KitStandard Replacement - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Control Arm Upper-Outer Bush Kit - Double Offset Alignment Correction. Camber Adjustable | SPF1811K | 1 |  | $239.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Outer Bush Kit - Double OffsetAlignment Correction. Camber Adjustable Vehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF2681K | 1 |  | $53.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit GT-T series, Standard, 69.5mm long tube, Bracket width 40mm | SPF1202K | 1 |  | $96.00 |
Bush, strut mountStrut Bar To Chassis Mount Bush KitGT-T series, Standard, 69.5mm long tube, Bracket width 40mm Vehicle Application Information: - Standard replacement 69.5mm long tube Bracket width 40mm
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit - Double Offset GT-T. Alignment Correction. 69.5mm long tube & Bracket width of 40mm | SPF1202AK | 1 |  | $141.00 |
Control Arm-/Trailing Arm BushStrut Bar To Chassis Mount Bush Kit - Double OffsetGT-T. Alignment Correction. 69.5mm long tube & Bracket width of 40mm A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - PS & DS Inc/Dec caster 69.5 long tube Bracket width 40mm
- Performance Handling Kit
- Axle alignment required after fitting
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Cut To Length Link | TRC4004 | 2 |  | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Time [min.]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1035 | 1 |  | $133.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 65 mm - Maximum Length 70 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits - Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit GTS & GTT only | SPF1484-24K | 1 |  | $29.00 |
Sway Bar Bush KitSway Bar Mount Bush KitGTS & GTT only available Sizes 15, 16, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 & 29 mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit GTS & GTT only | SPF1484-25K | 1 |  | $29.00 |
Sway Bar Bush KitSway Bar Mount Bush KitGTS & GTT only available Sizes 15, 16, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 & 29 mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit GTS & GTT only | SPF1484-26K | 1 |  | $29.00 |
Sway Bar Bush KitSway Bar Mount Bush KitGTS & GTT only available Sizes 15, 16, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 & 29 mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit GTS & GTT only | SPF1484-27K | 1 |  | $29.00 |
Sway Bar Bush KitSway Bar Mount Bush KitGTS & GTT only available Sizes 15, 16, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 & 29 mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Rear | 20mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0010RZ-20 | 1 |  | $311.10 |
Sway Bar Stabiliser Kit20mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | 22mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0010RZ-22 | 1 |  | $326.50 |
Sway Bar Stabiliser Kit22mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting Position: Rear
- Fitting Time [min.]: 120
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0010RZ-24 | 1 |  | $369.80 |
Sway Bar Stabiliser Kit24mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Bush Kit
| SPF1750K | 1 |  | $101.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Time [min.]: 270
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner & Outer Bush Kit Standard replacement kit "No Adjustment" | SPF1638K | 2 |  | $111.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner & Outer Bush KitStandard replacement kit "No Adjustment" Vehicle Application Information: - Front wheel steering only for toe adjuster
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner or Outer Bush Kit - Double Offset Alignment Correction. Inner & outer camber adjustment with 40mm long offset tube | SPF1869K | 2 |  | $164.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner or Outer Bush Kit - Double OffsetAlignment Correction. Inner & outer camber adjustment with 40mm long offset tube Vehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Inner & outer camber adjustment, 40mm long offset tube
- Performance Handling Kit
- Fitting Time [min.]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Differential Pinion Mount Bush Kit Re-use original inner tube. Front of differential mounting point. | SPF2582K | 1 |  | $62.00 |
Bush, differential mountDifferential Pinion Mount Bush KitRe-use original inner tube. Front of differential mounting point. Vehicle Application Information: - Re-use original inner tube. Front of differential mounting point.
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Differential Pinion Mount Bush Kit Replacement tubes in kit. Front of differential mounting point. | SPF2637K | 1 |  | $79.00 |
Bush, differential mountDifferential Pinion Mount Bush KitReplacement tubes in kit. Front of differential mounting point. Vehicle Application Information: - Replacement tubes in kit. Front of differential mounting point.
- Fitting Time [min.]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Differential To Crossmember To Chassis Mount Bush Kit
| SPF3775K | 1 |  | $121.00 |
Bush, differential mountDifferential To Crossmember To Chassis Mount Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Time [min.]: 240
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Shock Absorber Lower Bush Kit Must remove original shell before fitment, suited to BNR34, Replaces original part number 56219-24U01 | SPF2722K | 1 |  | $65.00 |
Bush, shock absorberShock Absorber Lower Bush KitMust remove original shell before fitment, suited to BNR34, Replaces original part number 56219-24U01 - Fitting Time [min.]: 120
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Subframe Mount Bush Kit
| SPF3774K | 1 |  | $382.00 |
Bush, sub-frameSubframe Mount Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Rear | Subframe Traction Bush Kit
| KIT201K | 1 |  | $69.00 |
Suspension KitSubframe Traction Bush KitA complete rear Subframe Kit for the rear of various Nissan 180SX, 200SX, 300ZX and Skyline models for Performance, Traction and Drifting. This kit allows for the rear subframe inclination angle to be changed for performance, traction or drifting. - Fitting Position: Rear
- Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Link Bush Kit
| SPF2667K | 1 |  | $29.00 |
Sway Bar Bush KitSway Bar Link Bush Kit- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-20K | 1 |  | $31.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-21K | 1 |  | $31.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-22K | 1 |  | $31.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting Position: Rear
- Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Toe Control Arm Inner & Outer Bush Kit
| SPF2296K | 1 |  | $93.00 |
Bush, control arm mountingToe Control Arm Inner & Outer Bush Kit- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|