| Front | Control Arm Lower-Inner Front Bush Kit
Up to Chassis 8NY 060000 | SPF1915K | 1 |  | $57.62 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush KitUp to Chassis 8NY 060000 Bush OD 30mm
Tube 19x12.3x54 - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
from Chassis 8NY 060001 | SPF3394K | 1 | | $136.48 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush Kitfrom Chassis 8NY 060001 Bush OD 45mm
Tube 24x12.3x54 - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Standard alignment; Up to Chassis 8NY 060000 | SPF2082K | 1 | | $96.16 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitStandard alignment; Up to Chassis 8NY 060000 Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
from Chassis 8NY 060001 | SPF3395K | 1 | | $161.38 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kitfrom Chassis 8NY 060001 - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction; Up to Chassis 8NY 060000 | SPF2084K | 1 | | $105.51 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction; Up to Chassis 8NY 060000 A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction; from Chassis 8NY 060001 | SPF3397K | 1 | | $161.38 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction; from Chassis 8NY 060001 A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
Alignment Correction; Up to Chassis 8NY 060000 | SPF2083K | 1 | | $105.51 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction; Up to Chassis 8NY 060000 Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
Alignment Correction; from Chassis 8NY 060001 | SPF3396K | 1 | | $161.38 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction; from Chassis 8NY 060001 Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Engine Support Lower-Front Bush Kit
Replaces complete original bush;Fits OEM Part Number: 1J0199851AB. | SPF2576K | 1 | | $40.63 |
Rubber Buffer, engine mounting systemEngine Support Lower-Front Bush KitReplaces complete original bush;Fits OEM Part Number: 1J0199851AB. Vehicle Application Information: - Replacement of original rubber bush
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
Replaces OEM 1JO422884A | SPF3366K | 1 | | $41.94 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitReplaces OEM 1JO422884A - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12245 | 1 |  | $216.81 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: 12mm Ball Joint Adjustable Link
Minimum Length 300 mm - Maximum Length 345 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Replaces OEM Part Number: 1J0411314R Bar diameters 15, 17, 18, 19, 20, 21, 22, 23, 25 and 26mm available | SPF2593-22K | 1 | | $35.38 |
Mounting, stabiliserSway Bar Mount Bush KitReplaces OEM Part Number: 1J0411314R Bar diameters 15,17,18,19,20,21,22,23, 25 and 26mm available available Sizes 15, 17, 18, 19, 20, 21, 22, 23, 25 & 26mm Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Replaces OEM Part Number: 1J0411314R Bar diameters 15, 17, 18, 19, 20, 21, 22, 23, 25 and 26mm available | SPF2593-23K | 1 | | $35.38 |
Mounting, stabiliserSway Bar Mount Bush KitReplaces OEM Part Number: 1J0411314R Bar diameters 15,17,18,19,20,21,22,23, 25 and 26mm available available Sizes 15, 17, 18, 19, 20, 21, 22, 23, 25 & 26mm Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Replaces OEM Part Number: 1J0411314R Bar diameters 15, 17, 18, 19, 20, 21, 22, 23, 25 and 26mm available | SPF2593-25K | 1 | | $36.12 |
Mounting, stabiliserSway Bar Mount Bush KitReplaces OEM Part Number: 1J0411314R Bar diameters 15,17,18,19,20,21,22,23, 25 and 26mm available available Sizes 15, 17, 18, 19, 20, 21, 22, 23, 25 & 26mm Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Beam Axle Pivot Bush Kit
| SPF2481K | 1 | | $260.11 |
Bush, beam axleBeam Axle Pivot Bush KitRemove original outer shell for fitment Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
