| Front | Control Arm Lower-Inner Front Bush Kit
Replaces OEM Part Number: 357407182 | SPF1915K | 1 |  | $57.62 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush KitReplaces OEM Part Number: 357407182 Bush OD 30mm
Tube 19x12.3x54 - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Standard alignment; Press metal arm; Replaces OEM Part Number: 1J0407181. | SPF2082K | 1 | | $96.16 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitStandard alignment; Press metal arm; Replaces OEM Part Number: 1J0407181. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction. Press metal arm. Replaces OEM Part Number: 1J0407181. | SPF2084K | 1 | | $105.51 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction. Press metal arm. Replaces OEM Part Number: 1J0407181. A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
DS Standard and PS offset alignment settings; Press metal arm; Replaces OEM Part Number: 1J0407181. | SPF2083K | 1 | | $105.51 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetDS Standard and PS offset alignment settings; Press metal arm; Replaces OEM Part Number: 1J0407181. Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Engine Support Insert Bush Kit
Void filling insert-Low NVH option recommended for Diesel motors;OEM Bracket Part Number: 1J0199851N. | SPF2575K | 1 | | $37.44 |
Rubber Buffer, engine mounting systemEngine Support Insert Bush KitVoid filling insert-Low NVH option recommended for Diesel motors;OEM Bracket Part Number: 1J0199851N. - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Engine Support Lower-Front Bush Kit
Replaces complete original bush;Fits OEM Part Number: 1J0199851AB;Also fits Golf R32. | SPF2576K | 1 | | $40.63 |
Rubber Buffer, engine mounting systemEngine Support Lower-Front Bush KitReplaces complete original bush;Fits OEM Part Number: 1J0199851AB;Also fits Golf R32. Vehicle Application Information: - Replacement of original rubber bush
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
Replaces OEM 1JO422884A | SPF3366K | 1 | | $41.94 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitReplaces OEM 1JO422884A - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4063 | 2 |  | $42.32 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 10.5mm ID Bush/Bush Link
90 Degree opposed
Length 105.5mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link Bush Kit
Upper & Lower mounts;Replaces OEM Part Number: 1J0411327;Reuse original crush tubes. | SPF2127K | 1 | | $50.63 |
Mounting, stabiliserSway Bar Link Bush KitUpper & Lower mounts;Replaces OEM Part Number: 1J0411327;Reuse original crush tubes. Vehicle Application Information: - Upper & lower mounts, replaces OE # 1JO 411 327
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Standard Size | SPF2593-21K | 1 | | $35.38 |
Mounting, stabiliserSway Bar Mount Bush KitStandard Size available Sizes 15, 17, 18, 19, 20, 21, 22, 23, 25 & 26mm Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Beam Axle Pivot Bush Kit
| SPF2481K | 1 | | $260.11 |
Bush, beam axleBeam Axle Pivot Bush KitRemove original outer shell for fitment Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
