| Front | Control Arm Lower-Inner Front Bush Kit
| SPF2137K | 1 |  | $66.12 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Front Bush Kit- Axle alignment required after fitting
 Fitment Difficulty- Fitting Position: Front
 2.5hrs Fitment Time- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Standard | SPF2138K | 1 | | $351.39 |
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
| SPF2139K | 1 | | $411.10 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Double OffsetVehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link
Cut To Length Link | TRC4004 | 2 |  | $39.50 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm  Fitment Difficulty- Fitting Position: Front
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4041 | 2 | | $34.50 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm Ball Joint Link
180 degree opposed
240mm center to center  Fitment Difficulty- Fitting Position: Front
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link Bush Kit
Re-use original bolt | SPF2305K | 1 | | $116.96 |
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10245 | 1 | | $187.00 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable 10mm Ball Joint Adjustable Link
Minimum Length 300 mm - Maximum Length 345 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.
- Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
After-market round sway bar, Bar diameter 21, 22mm available | SPF2140-21K | 1 | | $37.55 |
|
| Front | Sway Bar Mount Bush Kit
After-market round sway bar, Bar diameter 21, 22mm available | SPF2140-22K | 1 | | $37.55 |
|
| Front | Sway Bar Mount Bush Kit
Suits 21mm factory bar with flats at bush mounting point | SPF2561K | 1 | | $69.68 |
Sway Bar Bush KitSway Bar Mount Bush KitSuits 21mm factory bar with flats at bush mounting point Vehicle Application Information: - Suits 21mm factory bar with flats at bush mounting point
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Upper-Outer Bush Kit - Double Offset
preferred Position to gain 1 Degree Camber change | SPF2326K | 1 | | $115.75 |
Control Arm-/Trailing Arm BushControl Arm Upper-Outer Bush Kit - Double Offset
preferred Position to gain 1 Degree Camber change Vehicle Application Information: - 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Blade Control Arm Front Kit
Do not remove original shell; Suits 9/2002 to 5/2005. | SPF3466K | 1 | | $190.09 |
|
| Rear | Blade Control Arm Front Kit
Do not remove original shell; Suits 9/2002 to 5/2005. | SPF3466K | 1 | | $190.09 |
|
| Rear | Control Arm Lower-Inner & Outer Bush Kit
| SPF2324K | 1 | | $133.56 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner & Outer Bush KitRear Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
| SPF2325K | 1 | | $105.78 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitStandard Replacement Kit Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit - Double Offset
to be used in this Position when SPF2326K is already used in the outer Position and 2 Degrees Camber adjustment in total required | SPF2326K | 1 | | $115.75 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kit - Double Offsetto be used in this Position when SPF2326K is already used in the outer Position and 2 Degrees Camber adjustment in total required Vehicle Application Information: - 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Upper-Outer Bush Kit
| SPF2325K | 1 | | $105.78 |
Control Arm-/Trailing Arm BushControl Arm Upper-Outer Bush KitStandard Replacement Kit Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Upper-Outer Bush Kit - Double Offset
preferred Position to gain 1 Degree Camber change | SPF2326K | 1 | | $115.75 |
Control Arm-/Trailing Arm BushControl Arm Upper-Outer Bush Kit - Double Offsetpreferred Position to gain 1 Degree Camber change Vehicle Application Information: - 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Link Bush Kit
Re-use original bolt | SPF2305K | 1 | | $116.96 |
|
| Rear | Sway Bar Mount Bush Kit
Replacement bushing for original 20mm sway bar. Not suited to MPS or diesel. | SPF2141-20K | 1 | | $37.55 |
Sway Bar Bush KitSway Bar Mount Bush KitReplacement bushing for original 20mm sway bar. Not suited to MPS or diesel. available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
After-market round sway bar | SPF2141-21K | 1 | | $37.55 |
Sway Bar Bush KitSway Bar Mount Bush KitAfter-market round sway bar available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
After-market round sway bar | SPF2141-22K | 1 | | $37.55 |
Sway Bar Bush KitSway Bar Mount Bush KitAfter-market round sway bar available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
After-market round sway bar | SPF2141-23K | 1 | | $37.55 |
Sway Bar Bush KitSway Bar Mount Bush KitAfter-market round sway bar available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
After-market round sway bar | SPF2141-24K | 1 | | $37.55 |
Sway Bar Bush KitSway Bar Mount Bush KitAfter-market round sway bar available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Suits 21mm factory bar with flats at bush mounting point | SPF2578K | 1 | | $56.33 |
Sway Bar Bush KitSway Bar Mount Bush KitSuits 21mm factory bar with flats at bush mounting point Vehicle Application Information: - Suits 21mm factory bar with flats at bush mounting point
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Toe Control Arm Lower-Inner & Outer Bush Kit
Re-use original bolt | SPF2323K | 1 | | $160.94 |
Control Arm-/Trailing Arm BushToe Control Arm Lower-Inner & Outer Bush KitRe-use original bolt Front Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
