| Front | Control Arm Lower Complete Assembly
Left and Right Arms for Standard Replacement and Repair Upgrade | TRC0036K | 1 |  | $718.77 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Complete AssemblyLeft and Right Arms for Standard Replacement and Repair Upgrade Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement SuperPro has a complete replacement and repair upgrade solution for the BMW E36 lower control arms.
The SuperPro kit comes with LHS and RHS arms with heavy duty M-Spec ball joints, brackets and bushes.
It is a complete changeover kit for the BMW.
The complete arm kit is fitted with SuperPro bushings to positively locate the rear of the arm and eliminate the unwanted flex that comes with the O.E rubber bushing. - TRC0036K standard kit is a direct O.E repair/upgrade replacement.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower Complete Assembly
Left and Right Performance Arm Kit with Caster increase | TRC0036XK | 1 | | $730.55 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Complete AssemblyLeft and Right Performance Arm Kit with Caster increase For greater directional stability and Improved turn in. Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement SuperPro has a complete replacement and performance solution for the BMW E36 lower control arms.
The SuperPro kit comes with LHS and RHS arms with heavy duty M-Spec ball joints, brackets and bushes.
It is a complete changeover kit for the BMW.
The complete arm kit is fitted with SuperPro bushings to positively locate the rear of the arm and eliminate the unwanted flex that comes with the O.E rubber bushing. - TRC0036XK Caster increase kit will deliver extra caster to enhance the handling and directional stability of the vehicle.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
| SPF1253K | 1 |  | $146.01 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush KitStandard Replacement
Does not include outer Shell - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
| SPF1457-80K | 1 | | $195.55 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush KitStandard replacement.
Part includes outer shell.
Not suited to M3 as M3 is offset as standard. Vehicle Application Information: - Competition Kit - Heavy Duty
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
| SPF1457K | 1 | | $174.80 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush KitStandard replacement.
Part includes outer shell.
Not suited to M3 as M3 is offset as standard. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Double Offset
| SPF1459-80K | 1 | | $184.43 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Double OffsetAlignment Correction
Part includes outer Shell A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Performance Handling Kit
- Competition Kit - Heavy Duty
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Double Offset
| SPF1459K | 1 | | $151.92 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Double OffsetVehicle Application Information: - 1 degree caster adjustment available
Alignment Correction
Part includes outer Shell A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Single Offset
| SPF1458-80K | 1 | | $223.48 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Single OffsetVehicle Application Information: - 0.5 Degree Caster Adjustment available
Alignment Correction
Part includes outer shell Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Competition Kit - Heavy Duty
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Single Offset
| SPF1458K | 1 | | $151.92 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Single OffsetVehicle Application Information: - 0.5 Degree Caster Adjustment available
Alignment Correction
Part includes outer shell Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Shock Absorber Upper & Lower Bush Kit
| SPF2937K | 2 | | $29.42 |
Bush, shock absorberShock Absorber Upper & Lower Bush Kit- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF0340-26K | 1 | | $72.92 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 19, 20, 21, 22, 23, 24, 25, 26, 27 & 28.5mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF0340-27K | 1 | | $72.92 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 19, 20, 21, 22, 23, 24, 25, 26, 27 & 28.5mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Front | Sway Bar Mount To Link Bush Kit
| SPF1862K | 1 | | $68.17 |
Mounting, stabiliserSway Bar Mount To Link Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit
| SPF2421K | 1 | | $97.90 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitNote: Vehicles with multi-link rear suspension only.
Not suited for 318ti. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
| SPF2422K | 1 | | $122.17 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitNot suited for 318ti - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit - Offset
| SPF2668K | 1 | | $168.38 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - OffsetVehicle Application Information: - 2 Degrees of Camber Adjustment
Alignment Correction - Camber Adjustable
Not suited for 318ti - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Spring Insulator Lower Bush Kit
IRS Raises vehicle approximately 15mm | SPF1358-10K | 2 | | $52.21 |
Spring CapSpring Insulator Lower Bush KitIRS Raises vehicle approximately 15mm A=138mm B=33.8mm C=10mm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Spring Insulator Lower Bush Kit
IRS Raises vehicle approximately 9mm | SPF1358-6K | 2 | | $35.84 |
Spring CapSpring Insulator Lower Bush KitIRS Raises vehicle approximately 9mm A=138mm B=33.8mm C=6mm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Spring Insulator Lower Bush Kit
IRS Raises vehicle approximately 12mm | SPF1358-8K | 2 | | $44.37 |
Spring CapSpring Insulator Lower Bush KitIRS Raises vehicle approximately 12mm A=138mm B=33.8mm C=8mm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Link
Standard Replacement | TRC4075 | 2 | | $36.95 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 7mm & 8mm ID horizontal Bush/Bush Link
Length 100mm center to center - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF0339-15K | 1 | | $36.95 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 & 24mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Front Bush Kit
| SPF2146K | 1 | | $195.93 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
