Refine by vehicle variant
With Upper And Lower Control Arms, Spring, Shock Assembly And Drive Shaft
Front suspension diagram for TOYOTA LAND CRUISER 2007-2021 - 200 Series
With Panhard Rod, Upper And Lower Trailing Arms
Rear suspension diagram for TOYOTA LAND CRUISER 2007-2021 - 200 Series
With Panhard Rod, Upper And Lower Trailing Arms
Rear suspension diagram for TOYOTA LAND CRUISER 2007-2021 - 200 Series
Position | Part Name | Part No. | Qty/Car | Sub Brand | Price |
---|---|---|---|---|---|
Front and Rear | Enhancement Bush Kit | KIT195K | 1 | $1406.00 | |
Mounting, control/trailing armEnhancement Bush KitAs the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of any vehicle. Having an independent front suspension on such a large vehicle means the OEM bushes work very hard and durability, reliability and performance are compromised. Lifting a vehicle increases the forces on the suspension bushings, requiring a more resilient bushing in every location to control the attitude of the front upper and lower control arms as well as the rear upper and lower trailing arms. You need SuperPro Bushings if:
This Kit contains:
| |||||
Front | 39mm Extra Heavy Duty Non Adjustable Sway Bar | RC0029F-39 | 1 | $528.00 | |
Stabiliser Bar, suspension39mm Extra Heavy Duty Non Adjustable Sway BarSuperPro Roll Control Front Sway Bar Packages are the perfect addition to a 4WD. The resistance to the fitment of bigger front Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension. If the replacement Sway Bars are designed correctly and the Sway Bar links are lengthened, replacement Sway Bars can be fitted with minimal or no loss of articulation. Upgrading the front Sway Bars will
Vehicle Application Information:
| |||||
Front | Coil Spring Spacer Bush Kit | SPF3281-101K | 2 | $55.00 | |
Spacer Bushing, leaf spring hangerCoil Spring Spacer Bush KitVehicle Application Information:
Individual Spacer to trim ride height
| |||||
Front | Coil Spring Spacer Bush Kit | SPF3281-10K | 1 | $98.00 | |
Spacer Bushing, leaf spring hangerCoil Spring Spacer Bush KitVehicle Application Information:
10mm thick Spacer
| |||||
Front | Coil Spring Spacer Bush Kit | SPF3281-201K | 2 | $79.00 | |
Spacer Bushing, leaf spring hangerCoil Spring Spacer Bush KitVehicle Application Information:
Individual Spacer to trim ride height
| |||||
Front | Coil Spring Spacer Bush Kit | SPF3281-20K | 1 | $143.00 | |
Spacer Bushing, leaf spring hangerCoil Spring Spacer Bush KitVehicle Application Information:
20mm Spacer
| |||||
Front | Control Arm Lower Camber Bolt Kit | TRC0026 | 1 | $500.00 | |
Kit, camber adjustmentControl Arm Lower Camber Bolt KitComplete set of replacement Camber Bolts
| |||||
Front | Control Arm Lower Front Bush Kit | SPF3279K | 1 | $201.00 | |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush KitVehicle Application Information:
| |||||
Front | Control Arm Lower Rear Bush Kit | SPF3278K | 1 | $314.00 | |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitVehicle Application Information:
| |||||
Front | Control Arm Replacement Ball Joint for Fixed Offset Control Arm | KIT6480RK | 2 | $101.00 | |
Ball Joint Repair KitControl Arm Replacement Ball Joint for Fixed Offset Control ArmThis kit contains one replacement heavy-duty high-articulation ball joint for the SuperPro fixed offset Upper control arm. The kit contains a brand-new ball joint, which also includes a new dust boot, circlip, nut and any other required installation hardware. Notes: If both ball joints need replacing, two kits will be required. This kit is used to replace the ball joint in the following part numbers: TRC6480, TRC6485, TRC6720 Vehicle Application Information:
| |||||
Front | Control Arm Replacement Bush Kit for Fixed Offset Control Arm | KIT6485K | 2 | $66.00 | |
Mounting Kit, control/trailing arm mountingControl Arm Replacement Bush Kit for Fixed Offset Control ArmThis kit contains two replacement SuperPro polyurethane bushings for the SuperPro fixed offset upper control arm. The replacement kit contains new bushings, crush tubes, a tube of grease and any other required hardware such as washers. Note: Two kits will be required if the bushings in both arms need replacing. This kit is used to replace the bushings in the following part numbers: TRC6485 & TRC8485 Vehicle Application Information:
| |||||
Front | Control Arm Upper Complete Assembly - Adjustable | TRC485 | 1 | $1068.00 | |
Control/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - AdjustableVehicle Application Information:
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop. These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle. Key Features
Vehicle Application Information:
| |||||
Front | Control Arm Upper Complete Assembly - Fixed Offset | TRC6485 | 1 | $730.00 | |
Control/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - Fixed OffsetVehicle Application Information:
Left and Right Fixed Offset Arms for Lifted Vehicles with Caster and Camber Correction fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement Fixed offset upper control arms with heavy-duty, high-articulation ball joints and SuperPro polyurethane bushings for 1 to 3 inch lifted vehicles.The SuperPro fixed offset upper control arm (UCA) is a high-performance aftermarket component designed to enhance the wheel alignment of lifted 4x4 vehicles, resulting in reduced tire wear and improved overall performance. This UCA is constructed using high-strength steel forgings and tube steel, making it durable and reliable for heavy-duty use. The components are robot-welded, ensuring consistent and precise manufacturing standards.The SuperPro fixed offset UCA features a heavy-duty high-articulation ball joint that enables the suspension to have greater articulation without binding, allowing for improved control and handling over rough terrain. This UCA also includes SuperPro’s renowned polyurethane bushings, which offer superior resilience and durability compared to traditional rubber bushings. The polyurethane material is resistant to abrasion, wear, and chemicals, making it ideal for harsh off-road environments. Vehicle Application Information:
| |||||
Front | Control Arm Upper Inner Bush Kit | SPF3277K | 1 | $263.00 | |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitVehicle Application Information:
| |||||
Front | Control Arm Upper Inner Bush Kit - Offset | SPF3277XK | 1 | $288.00 | |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - OffsetAn "Offset Kit" in this position is used to correct the camber change that occurs on a lifted or lowered vehicle. By following the install instructions, this bushing kit can be fitted in multiple ways to change the position of the arm to get the optimal result for camber correction. Vehicle Application Information:
| |||||
Front | Differential Drop Kit | TRCLC200DD | 1 | $172.00 | |
Mounting, differentialDifferential Drop KitSuits Lifted vehicles. When lifting the 2007 to current 200 Series Land Cruiser, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots that will lead to splitting and premature failure of the CV. The SuperPro bolt on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm. Reducing the angles the CV joints are operating at will help avoid the expensive replacement costs of CV's and boots. This wear is accelerated further if larger & wider wheels and tyres are fitted.
| |||||
Front | ReadyStrut Top Caps | RS003 | 2 | $106.00 | |
Suspension Strut MountingReadyStrut Top CapsStrut Cap, Spring Seat, Nuts & Washers
| |||||
Front | Shock Absorber Upper Bush Kit | SPF3743K | 1 | $98.00 | |
Bush, shock absorberShock Absorber Upper Bush Kit
| |||||
Front | Steering Rack & Pinion Mount Bush | SPF3770K | 1 | $128.00 | |
Bush, steering rackSteering Rack & Pinion Mount BushVehicle Application Information:
| |||||
Front | Strut Mount Lower Bush Kit | SPF3282K | 1 | $283.00 | |
Bush, strut mountStrut Mount Lower Bush KitVehicle Application Information:
| |||||
Front | Sway Bar Mount Bush Kit | SPF3280-43K | 1 | $78.00 | |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information:
| |||||
Front | Sway Bar Mount Bush Kit | SPF3448-34K | 1 | $80.00 | |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes: 32, 34, 35, 37.5, 39 & 40 mm Vehicle Application Information:
| |||||
Rear | 33mm Extra Heavy Duty Non Adjustable Sway Bar | RC0029R-33 | 1 | $486.00 | |
Stabiliser Bar, suspension33mm Extra Heavy Duty Non Adjustable Sway BarSuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD. The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension. If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation. Upgrading to Roll Control Sway Bars will:
Vehicle Application Information:
| |||||
Rear | Coil Spring Spacer Bush Kit | SPF3287-10K | 1 | $102.00 | |
Spring SeatCoil Spring Spacer Bush KitVehicle Application Information:
| |||||
Rear | Coil Spring Spacer Bush Kit | SPF3287-15K | 1 | $143.00 | |
Spring SeatCoil Spring Spacer Bush KitVehicle Application Information:
| |||||
Rear | Extended Sway Bar Link | TRC4308 | 1 | $282.00 | |
Link/Coupling Rod, stabiliser barExtended Sway Bar LinkTRC4308 has been designed and manufactured in a one piece forged design with OE specification bushes and ball stud to replicate the factory component in function and appearance. Suited to KDSS fitted 200 Series Land Cruisers with 50+mm of suspension lift. The link allows considerably more suspension travel with supporting modifications such as longer shocks and control arms etc and assists with rectification of the “KDSS Lean” as commonly found in the 200 series. TRC4308 includes a 50mm extension at the sway bar mount pivot, compared to the OE arm, allowing increased suspension travel for 200 Series with KDSS when modified to run long travel shocks (length to be checked & confirmed prior to fitment). Vehicle Application Information:
| |||||
Rear | Panhard Rod - Adjustable | TRC1140 | 1 | $285.00 | |
Mounting, panhard rodPanhard Rod - AdjustableSuperPro Adjustable Panhard Rod - a must-have for avid 4x4 enthusiasts looking for a heavy-duty solution to reset axle location and rectify wheel alignment on raised vehicles. Designed in Australia and fitted with SuperPro bushings, this rod minimizes NVH and maximizes longevity. It's worth noting that it's off-car adjustable, ensuring ease of use. Made with heavy-duty DOM steel tube and forged ends for added strength, this adjustable panhard rod features SuperPro bushings, providing quiet and maintenance-free operation. Vehicle Application Information:
| |||||
Rear | Panhard Rod Bush Kit | SPF3292K | 1 | $64.00 | |
Bush, panhard rodPanhard Rod Bush Kit
| |||||
Rear | Sway Bar Link Lower Bush Kit | SPF2147K | 1 | $51.00 | |
Mounting, stabiliser barSway Bar Link Lower Bush KitVehicle Application Information:
| |||||
Rear | Sway Bar Link Upper Bush Kit | SPF4805-80K | 1 | $49.00 | |
Mounting, stabiliser barSway Bar Link Upper Bush KitVehicle Application Information:
| |||||
Rear | Sway Bar Link Upper Bush Kit | SPF4805-90K | 1 | $50.00 | |
Mounting, stabiliser barSway Bar Link Upper Bush KitVehicle Application Information:
| |||||
Rear | Sway Bar Mount Bush Kit | SPF3449-33K | 1 | $62.00 | |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes: 26, 30, 33 & 34 mm Vehicle Application Information:
| |||||
Rear | Trailing Arm - Lower Adjustable Kit | TRC1139 | 1 | $650.00 | |
Control/Trailing Arm, wheel suspensionTrailing Arm - Lower Adjustable KitThis trailing arm kit for the 200 Series is designed to correct the pinion angle on a lifted vehicle. Offering an adjustable solution, while improving both on- and offroad performance. Supplied as a complete kit and fully assembled with SuperPro bushings. Fitted with SuperPro bushes, these suspension arms have been optimised for longevity, durability and performance without any unwanted NVH. Vehicle Application Information:
| |||||
Rear | Trailing Arm - Upper Adjustable Kit | TRC1141 | 1 | $479.00 | |
Control/Trailing Arm, wheel suspensionTrailing Arm - Upper Adjustable KitThis trailing arm kit for the 200 Series is designed to correct the pinion angle on a lifted vehicle. Offering an adjustable solution, while improving both on- and offroad performance. Supplied as a complete kit and fully assembled with SuperPro bushings. Fitted with SuperPro bushes, these suspension arms have been optimised for longevity, durability and performance without any unwanted NVH. Vehicle Application Information:
| |||||
Rear | Trailing Arm Lower Bush Kit | SPF3286K | 1 | $305.00 | |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush KitVehicle Application Information:
| |||||
Rear | Trailing Arm Upper Bush Kit | SPF3285K | 1 | $235.00 | |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush KitVehicle Application Information:
|