Tap to Search Parts or Vehicles

SuperPro Control Arm Kit for

Part Information




Control Arm

SuperPro Control Arm Kit

There must be at least 30mm of clearance between the droop stop and the chassis at ride height to avoid any damage to the arms. Left and Right Arms for Lifted Vehicles with Caster and Camber Correction Headlight sensor bracket on RH Arm

Vehicle Application Information:

  • Based on a standard 2" lift - Approx 2 degrees of caster and approx an extra 1.5 degrees of camber

Does suit Vehicles with Headlight Sensor.

Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement.

Droop Stop included.

Getting the correct alignment is no longer a problem.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 2 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.

Key Features
  • In-built camber and caster change to suit lifted vehicle
  • In-built droop increase of approx. 10mm
  • Extra Droop clearance with included SuperPro shortened Droop Stop
  • Increased clearance between spring and Control Arm at full articulation
  • OE quality ball joint
  • SuperPro Bushings
  • Made in Australia
  • Axle alignment required after fitting
  • Fitting Difficulty: difficult
  • Fitting Position: Front
  • Fitting Time [min.]: 180