| Front | Control Arm Lower Assembly Kit
| TRC1070 | 1 |  | $280.00 |
 Control ArmControl Arm Lower Assembly KitThe SuperPro front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made this kit by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower Complete Alloy Assembly with DuroBall
Left and Right Performance Arm Kit with Caster increase | ALOY0018K | 1 | | $799.00 |
Control ArmControl Arm Lower Complete Alloy Assembly with DuroBallLeft and Right Performance Arm Kit with Caster increase Vehicle Application Information: - 1 Degree Positive Caster Change per Side. Up to 0.5 Degrees Negative Camber Change. Please read fitting Instructions
Caster Increase Alloy Arm with DuroBall Rear Bushing & built in Camber Change SuperPro Alloy Control Arm Assemblies deliver more caster, camber and eliminates unwanted flex.
Fitted with the SuperPro DuroBall rear bushing and for maximum arm control, this arm is the best upgrade available!
SuperPro Tip:
Care needs to be taken with aggressively lowered vehicles with non standard tyre and wheel packages to avoid tyre/guard contact. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Front Bush Kit
| SPF4175K | 1 |  | $73.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
standard replacement | SPF4176K | 1 | | $145.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush Kitstandard replacement Suits vehicles with vertically mounted lower Control Arm Bush - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Double Offset
Double Caster Offset | SPF4178K | 1 | | $145.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush Kit - Double OffsetDouble Caster Offset Vehicle Application Information: - up to 2 Degrees Caster Adjustment available
Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Single Offset
Single Caster Offset | SPF4177K | 1 | | $145.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush Kit - Single OffsetSingle Caster Offset Vehicle Application Information: - 1 Degree Caster Adjustment available
Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Strut Mounts - Offset with Extra Camber
| TRC5000 | 1 | | $385.00 |
Suspension Strut MountingStrut Mounts - Offset with Extra Camber1 Degree Extra Camber built into the top mount - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4048 | 2 | | $35.90 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 12mm Ball Joint Link
90 Degree opposed
Length 334mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Control Arm Lower-Front Outer Bush Kit
| SPF4180K | 1 | | $105.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Front Outer Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit
High Performance version | SPF4181-90K | 1 | | $117.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitHigh Performance version - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit
| SPF4181K | 1 | | $101.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Front Bush Kit
| SPF3350K | 1 | | $104.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Control Arm Lower-Outer Bush Kit
| SPF4426K | 1 | | $63.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Outer Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
| SPF4193K | 1 | | $89.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Control Arm Upper-Outer Bush Kit
| SPF4194K | 1 | | $80.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Outer Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Trailing Arm Bush Kit
High Performance Version | SPF4195-90K | 1 | | $139.00 |
Control Arm-/Trailing Arm BushTrailing Arm Bush KitHigh Performance Version - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Trailing Arm Bush Kit
| SPF4195K | 1 | | $113.00 |
Control Arm-/Trailing Arm BushTrailing Arm Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
