Front | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0005FZ-24 | 1 | | $394.00 |
Stabiliser Bar, suspension24mm Heavy Duty 2 Position Blade Adjustable Sway BarIf you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer! By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar.
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit - Alloy Standard replacement | TRC1065 | 1 | | $605.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly Kit - AlloyStandard replacement Left and Right Arms for Standard Replacement and Repair Upgrade This front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1065 by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.Vehicle Application Information: - standard replacement
- kit does not include ball joints, please re-use OE ball joints
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Control Arm Lower Complete Alloy Assembly
| ALOY0001K | 1 | | $871.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Complete Alloy AssemblyVehicle Application Information: - 1 degree caster adjustment available
Left and Right Performance Arm Kit with Anti lift and Caster increase. Corrosion resistant. Reduces arm movement. SuperPro has made some updates and minor changes to this very popular Alloy Arm kit for VAG platform cars.
Here are the key points: - New design rear bracket to add extra “Anti-Lift”.
- Maintained the same caster increase as the previous version.
- Added elongated mounting hole in the bracket for wider fitment applications.
- Adopted higher Duro Black bushings.
- Increased model range.
Upgrade your car with SuperPro for enhanced performance, better alignment and increased service life. SuperPro Alloy Control Arm Assemblies deliver more caster, camber and eliminate unwanted flex. SuperPro Alloy control arms are more rigid and less likely to flex than an OEM steel arm, maintaining static wheel alignment settings even under the most demanding of circumstances. Built for precision performance, providing sharper steering meaning more driver confidence and increased vehicle safety. Increasing vehicle grip is the ultimate goal for SuperPro. Our Alloy Control Arms offer greater vehicle performance on road and on track. Perfect for daily drivers, hobbyists, enthusiasts and professionals. Featuring the new "Grip Dynamics" system which improves grip for better handling and performance by focusing on key alignment and dynamic handling elements. SuperPro Supaloy control arms deliver: - Instantly noticeable performance upgrade.
- More precise steering and better handling.
- A increase in positive caster.
- Anti lift for more traction and power delivery.
Vehicle Application Information: - Includes Bushes & Rear Alloy Bracket
- kit does not include ball joints, please re-use OE ball joints
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Front Bush Kit
| SPF3346K | 1 | | $113.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush Kit- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush & Bracket Kit
| SPF5300K | 1 | | $275.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush & Bracket KitStandard Replacement for Repair and Repair Upgrade SuperPro has now made it really easy and affordable to repair and upgrade a huge range of VAG vehicles. - The brackets and bushes are supplied together in one easy to install package, making this repair upgrade a no brainer!
- The negative effects for handling and braking that come from voided, soft or worn rubber bushes are eliminated with the new SuperPro Bracket and Bushing kit.
Now everyone can enjoy the feeling of positive arm location that SuperPro brings when replacing the OE rubber bushes.
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing will be replaced at the same time. Vehicle Application Information: - to suit vehicles with horizontally mounted Control Arm Bush into bracket
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bracket Mount - Street & Sports Kit
| ALOY4343K | 1 | | $313.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Rear Bracket Mount - Street & Sports KitLeft and Right Performance Bracket Kit with Anti lift and Caster increase.
Reduces arm movement.
Corrosion resistant bushing.
Bushing & Bracket Assembly - Preassembled - Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement | TRC4048 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkStandard Replacement 12mm Ball Joint Link
90 Degree opposed
Length 334mm center to center Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12265 | 1 | | $239.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 320 mm - Maximum Length 365 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | 22mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0005RZ-22 | 1 | | $394.00 |
Stabiliser Bar, suspension22mm Heavy Duty 2 Position Blade Adjustable Sway BarIf you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer!
By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar. - Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0005RZ-24 | 1 | | $427.00 |
Stabiliser Bar, suspension24mm Heavy Duty 2 Position Blade Adjustable Sway BarIf you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer! By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar.
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 120
- Part of kit: (x)
|
Rear | Sway Bar Link Standard Replacement | TRC4050 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkStandard Replacement 10mm Ball Joint Link to parallel 10mm ID Bush
Length 95.9mm center to center Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045L | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF3355-20K | 1 | | $61.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 24, 25, 26 & 27mm Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 120
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|