Front and Rear | Performance Sway Bar Upgrade Kit
| RCVAG005KIT | 1 | | $1059.00 |
Stabiliser Bar, suspensionPerformance Sway Bar Upgrade Kit24mm Front 2 Point Adjustable and 24mm Rear 2 Point Adjustable Sway Bars.
Kit includes Front and Rear Sway Bars, Heavy Duty High Articulation Sway Bar Links. SuperPro Roll Control Swaybar Kits are designed to deliver a predictable, neutrally balanced suspension.
If you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer!
By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar. - Fitting Position: Front and Rear
- Axle alignment required after fitting
- Fitting time [min]: 360
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0005FZ-24 | 1 | | $394.00 |
Stabiliser Bar, suspension24mm Heavy Duty 2 Position Blade Adjustable Sway BarIf you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer! By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar.
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Front
- Part of kit: RCVAG005KIT (x1)
|
Front | Control Arm Lower Front Bush Kit
| SPF4175K | 1 | | $102.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush Kit- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Front Bush Kit - Performance Upgrade
| SPF5552K | 1 | | $286.18 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush Kit - Performance UpgradeThis kit provides additional adjustment to camber or caster depending on driver’s requirement to achieve the desired wheel alignment settings. Vehicle Application Information: - alignment correction
- when paired with a standard hole centre rear bush, this kit can provide a maximum of -0.5 degree camber or +0.5 degree caster.
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit
| SPF4176K | 1 | | $201.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitSuits vehicles with vertically mounted lower Control Arm Bush Vehicle Application Information: - to suit Steel Subframe
- standard replacement
- 64.4mm OD
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit
| SPF5592K | 1 | | $293.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitSuits vehicles with vertically mounted lower Control Arm Bush Vehicle Application Information: - to suit Alloy Subframe
- standard replacement
- 64.4mm OD
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit - Double Offset
| SPF4178K | 1 | | $201.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Double OffsetSuits vehicles with Vertical Control Lower Arm Rear Mounting Bolt
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!Vehicle Application Information: - to suit Steel Subframe
- alignment correction
- 64.4mm OD
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit - Double Offset
| SPF5594K | 1 | | $301.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Double OffsetSuits vehicles with vertically mounted lower Control Arm Bush Vehicle Application Information: - to suit Alloy Subframe
- alignment correction
- 64.4mm OD
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit - Single Offset
| SPF4177K | 1 | | $201.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Single OffsetVehicle Application Information: - 1 degree caster adjustment available
Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved.Vehicle Application Information: - to suit Steel Subframe
- alignment correction
- 64.4mm OD
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit - Single Offset
| SPF5593K | 1 | | $301.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Single OffsetSuits vehicles with vertically mounted lower Control Arm Bush Vehicle Application Information: - to suit Alloy Subframe
- alignment correction
- 64.4mm OD
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement | TRC4048 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkStandard Replacement 12mm Ball Joint Link
90 Degree opposed
Length 334mm center to center Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12265 | 1 | | $239.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 320 mm - Maximum Length 365 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | 22mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0005RZ-22 | 1 | | $394.00 |
Stabiliser Bar, suspension22mm Heavy Duty 2 Position Blade Adjustable Sway BarIf you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer!
By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar. - Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: RCVAG005KIT (x1)
|
Rear | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0005RZ-24 | 1 | | $427.00 |
Stabiliser Bar, suspension24mm Heavy Duty 2 Position Blade Adjustable Sway BarIf you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer! By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar.
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 120
- Part of kit: RCVAG005KIT (x1)
|
Rear | Sway Bar Link Standard Replacement | TRC4050 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkStandard Replacement 10mm Ball Joint Link to parallel 10mm ID Bush
Length 95.9mm center to center Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045L | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Part of kit: (x)
|