Front | Bump Stop Kit
| SPF1833BK | 1 |  | $134.74 |
Bump StopBump Stop Kit2 x Bump Stops & 2 x Boots per kit, 54mm Long x 67.5 Wide x 20-22mm Inside Diameter - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front Bush Kit
| SPF2913K | 1 |  | $258.86 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit
| SPF2910K | 1 |  | $248.41 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Engine Steady Mount Bush Kit
| SPF2563K | 1 |  | $60.13 |
Rubber Buffer, engine mounting systemEngine Steady Mount Bush KitUpper Rear Engine Steady Mount
Suits Petrol Engines up to Chassis 494815/494640 only - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Engine Steady Mount Bush Kit Front | SPF4489K | 1 |  | $88.72 |
Engine MountingEngine Steady Mount Bush KitFront - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement | TRC4049 | 2 |  | $42.32 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 10mm & 12mm Ball Joint Link
180 Degree opposed
Length 332mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link Cut To Length Link | TRC4007 | 2 |  | $42.32 |
Stabiliser Bar, chassisSway Bar LinkCut To Length Link 12mm Ball Joint Link
Minimum Length 90mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link Standard Replacement | TRC4046 | 2 |  | $42.32 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 12mm parallel Ball Joint Link
Length 140mm center to center - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1245A | 1 |  | $190.88 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 125 mm - Maximum Length 145 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|