Front | Camber Adjusting Bolt Kit Adds +/- 1.5 Degree Camber | SPF4351-15K | 1 |  | $42.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degree Camber Camber Bolt Kit 15mm - Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front Bush Kit
| SPF0996K | 1 |  | $50.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit Standard replacement | SPF2085K | 1 |  | $146.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitStandard replacement - Fitting Time [min.]: 210
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset Double offset | SPF2087K | 1 |  | $149.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Double OffsetDouble offset A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset Single offset | SPF2086K | 1 |  | $149.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Single OffsetSingle offset Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 210
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit Suits 8/2003 - 11/2005 | SPF3566K | 1 |  | $77.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitSuits 8/2003 - 11/2005 - Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit Suits 07/2000 - 07/2003 | SPF4122K | 1 |  | $51.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitSuits 07/2000 - 07/2003 - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement | TRC4018 | 1 |  | $32.30 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm Ball Joint Link
180 Degree opposed
Length 285mm center to center - Fitting Difficulty: moderate
- Fitting Time [min.]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 |  | $189.50 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: 10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Time [min.]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Suits OE Bar Size | SPF3179-22K | 1 |  | $39.00 |
Sway Bar Bush KitSway Bar Mount Bush KitSuits OE Bar Size available Sizes 20, 22 & 24mm Vehicle Application Information: - Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: SPF3179-24K (x1)
|
Front | Sway Bar Mount Bush Kit
| SPF3179-24K | 1 |  | $39.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 20, 22 & 24mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 75
- Part of kit: SPF3179-22K (x1)
|
Rear | Shock Absorber Lower Bush Kit
| SPF2178-16K | 1 |  | $20.00 |
Bush, shock absorberShock Absorber Lower Bush KitA=16mm B=24.5mm C=24mm D=36mm E=30mm Double Tapered Bushing - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Sway Bar Link Cut To Length Link | TRC4004 | 2 |  | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Position: Rear
- Fitting Time [min.]: 30
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 |  | $166.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF0605-20K | 1 |  | $30.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 12, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 & 27mm Vehicle Application Information: - 20mm ID
- Suits 32mm Bracket Height
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|