| Front and Rear | SuperPro Easy-Lift Kit
| TRC096LK | 1 |  | $353.50 |
 Suspension Lift KitSuperPro Easy-Lift KitVehicle Application Information: - To be used with standard suspension only.
- Strongly recommend to fit longer travel shock absorbers on the rear.
This kit will lift the vehicle approx. 45mm and retains the standard suspension.
Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks, 4 U Bolts & Brake Hose Extension Kit SuperPro Roll Control Ezy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Ute and retain the standard suspension. Each kit has been tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension. Everything that is required has been supplied in each Kit, including comprehensive fitting instructions to ensure the right outcome every time. Easy Lift Kit (Spacer Lift kit) legal compliance. We explain here about the legality of spacer lift kits in particular how SuperPro spacer lift kits are legal: Click - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | 33mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0016FZ-33 | 1 | | $417.12 |
Stabiliser Bar, chassis33mm Heavy Duty 2 Position Blade Adjustable Sway BarSuperPro Roll Control Front Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of bigger front Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars are designed correctly and the Sway Bar links are lengthened, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Sway Bars will- Improve the stability by compensating for the change in centre of gravity of the chassis
- Increase tyre life
- Control body roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Rear Sway Bar Kit to get the complete handling upgrade package - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Ball Joint Upper Boot Kit
Kit includes Boot and Cir Clips for one Control Arm | TRC7000RK | 2 | | $34.32 |
Ball Joint Repair KitBall Joint Upper Boot KitKit includes Boot and Cir Clips for one Control Arm Vehicle Application Information: - repair kit for SuperPro Roll Control arms only
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: TRC470 (x1)
|
| Front | Control Arm Lower Camber Bolt Kit
Complete set of replacement Camber Bolts | TRC0019 | 1 | | $226.24 |
Kit, camber adjustmentControl Arm Lower Camber Bolt KitComplete set of replacement Camber Bolts - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower Complete Assembly Kit - Double Offset
Left and Right Arms for Lifted Vehicles with Extra Caster and Camber Correction | TRC472 | 1 | | $789.47 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Complete Assembly Kit - Double OffsetLeft and Right Arms for Lifted Vehicles with Extra Caster and Camber Correction Alignment Correction
Complete Arm Assemblies with Offset SuperPro Bushings, Uprated Ball Joints & Camber Pins. The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The New SuperPro Roll Control Arm Kits are the ideal solution and come complete with: - Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Re-designed and Up-rated Ball Joints
- Up-rated Camber Bolts for four positions.
- Camber increase version is ideally suited to a lifted vehicle.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower Complete Assembly Kit - Standard
Left and Right Arms for Standard Replacement and Repair Upgrade | TRC471 | 1 | | $754.13 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Complete Assembly Kit - StandardLeft and Right Arms for Standard Replacement and Repair Upgrade Complete Arm Assemblies with Standard SuperPro Bushings, Uprated Ball Joints & Camber Pins The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The New SuperPro Roll Control Arm Kits are the ideal solution and come complete with: - Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Re-designed and Up-rated Ball Joints
- Up-rated Camber Bolts for four positions.
- Standard configuration
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front & Rear Bush Kit
Standard replacement | KIT181K | 1 |  | $459.11 |
Mounting, control/trailing armControl Arm Lower-Inner Front & Rear Bush KitStandard replacement Kit contains: - Front Control Arm Lower-Inner Front Bush Kit
- Front Control Arm Lower-Inner Rear Bush Kit
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 330
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
Standard replacement | SPF4341K | 1 |  | $253.75 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush KitStandard replacement Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit - Double Offset
Alignment Correction
Camber Adjustable | SPF4342K | 1 | | $253.75 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush Kit - Double OffsetAlignment Correction
Camber Adjustable Vehicle Application Information: - 0.6 Degrees of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Alignment Correction
Camber Adjustable | SPF4347K | 1 | | $256.42 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Alignment CorrectionCamber Adjustable Vehicle Application Information: - 0.6 Degrees of Camber Adjustment
An “Offset Kit” in this position is predominantly used to extend the range of adjustment of the “Factory” adjustment mechanism. This is required to achieve additional caster or camber change to correct the wheel alignment of a lifted or lowered vehicle. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Standard Replacement
| SPF4346K | 1 | | $256.34 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Standard ReplacementControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Upper Complete Assembly - Adjustable
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction | TRC470 | 1 | | $1025.13 |
 Control Arm/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - AdjustableLeft and Right Arms for Lifted Vehicles with Caster and Camber Correction Vehicle Application Information: - +/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment
These arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features - Increased articulation, perfect for the off road environment
- Provides for camber and caster adjustment using an adjustable ball joint
- Increased clearance between spring and Control Arm at full articulation
- SuperPro Bushings
- Made in Australia
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: TRC7000RK (x1)
|
| Front | Control Arm Upper Complete Assembly - Fixed Offset
Left and Right Offset Arms for Lifted Vehicles with Fixed Caster and Camber Correction | TRC6470 | 1 | | $701.10 |
 Control Arm/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - Fixed OffsetLeft and Right Offset Arms for Lifted Vehicles with Fixed Caster and Camber Correction Vehicle Application Information: - providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber
Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement These arms fitted with Heavy Ball joints and SuperPro Bushes to reduce Arm movement. Getting the correct alignment is no longer a problem. The SuperPro Fixed Offset Upper Control Arm is an all-in-one solution for any vehicle that has been lifted between 40mm and 65mm (2.5”). Providing an increase between 2.5 and 3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off a 50mm Lift) along with greater clearance to the coil over strut and more articulation of the arm. Key Features • Fixed offset alignment correction arms • In-built camber and caster change to suit lifted vehicle • Increased clearance between spring and Control Arm at full articulation • Heavy Duty ball joint • SuperPro Bushings - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Control Arm Upper Complete Assembly - Fixed Offset
These SuperPro Fixed Offset Upper Control Arms are a heavy duty, all-in-one solution for any vehicle that has been lifted 2.5"-3.5". Providing an increase in caster and camber correction along with greatly improved neutral ball joint position and increase | TRC6490 | 1 | | $818.93 |
 Control Arm/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - Fixed OffsetThese SuperPro Fixed Offset Upper Control Arms are a heavy duty, all-in-one solution for any vehicle that has been lifted 2.5"-3.5". Providing an increase in caster and camber correction along with greatly improved neutral ball joint position and increase Vehicle Application Information: - Heavy Duty Arm Kit to suit 2.5" - 3.5" Lift
- providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber
These arms are intended to be used to improve the ball joint position and improve bump steer. These arms are a Heavy Duty construction with higher articulation Ball joints to suit higher lifts and are fitted with SuperPro Bushes to control unwanted arm movement. Getting the correct alignment is no longer a problem. Key Features • Fixed offset alignment correction arms • Heavy Duty Construction • In-built camber and caster change to suit lifted vehicle • Improved ball joint position for high lift vehicles • Increased clearance between spring and Control Arm at full articulation • Heavy Duty, high articulation ball joint • SuperPro Bushings - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Control Arm Upper Complete Assembly Kit - Standard
Left and Right Arms for Standard Replacement and Repair Upgrade | TRC477 | 1 | | $312.26 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly Kit - StandardLeft and Right Arms for Standard Replacement and Repair Upgrade Complete Upper Arm Assemblies with Standard SuperPro Bushings and Uprated Ball Joints The SuperPro Complete Upper Control Arm Kit will overcome the repair problems associated with worn ball joints and replacing the bushes.
The New SuperPro Roll Control Arm Kits are the ideal repair and repair upgrade solution and come complete with: - Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Re-designed and Up-rated Ball Joints
- Standard configuration
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Upper, Lower & Steering Rack Bush Kit
| KIT202K | 1 | | $788.60 |
 Mounting, control/trailing armControl Arm Upper, Lower & Steering Rack Bush KitVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
Kit contains: - Standard Replacement Lower Control Arm Bushes
- Camber Adjustable Upper Control Arm Bushes
- Steering Rack Mount Bushes
This Kit is the ideal choice for bush replacement for repair or upgrade.
SuperPro out performs the original O.E bushings in every location on the vehicle.
Upgrade & Suspension Lift - Fitting bigger, wider wheels and tyres seriously impact the performance of the rubber bushes.
- Increasing the tyre contact patch increases the amount of rubber in contact with the road; this in turn amplifies the drag and load imparted on the rubber bushings. This will cause instability under braking and dramatically reduce their service life.
- Raising a 4WD dramatically alter the performance of a rubber bushing.
- SuperPro bushings provide superior control and, in specific locations, work as a free pivoting bearing, regardless of ride height.
- Lifting a vehicle also lifts the centre of gravity, in turn inducing greater forces on the suspension, requiring a more resilient suspension bushing in every location to control the attitude of the vehicle.
Repair - Rubber bushings deteriorate and induce undesirable characteristics into the handling.
- Worn bushings impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject severe directional changes under braking.
- SuperPro bushings are more durable and give more positive arm location than an O.E rubber bushing, resulting in a vehicle that gives the driver that “New Car Feel” for the life of the car.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 360
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit - Alignment Correction
Camber Adjustable | SPF3230K | 1 | | $331.78 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Alignment CorrectionCamber Adjustable Vehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
An "Offset Kit" in this position is used to correct the camber change that occurs on a lifted or lowered vehicle.
By following the install instructions, this bushing kit can be fitted in multiple ways to change the position of the arm to get the optimal result for camber correction.
Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit - Standard Replacement
| SPF2845K | 1 | | $331.78 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Standard ReplacementControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Differential Drop Kit
| TRCHILUXDD | 1 | | $141.39 |
Mounting, differentialDifferential Drop KitSuits Lifted vehicles.
The kit has been designed in such a way that allows the original bash plate to be refitted.
It is supplied complete with all required spacers, bolts, washers and nuts. When lifting the 2005 to current model Hilux 4WD, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots that will lead to splitting and premature failure of the CV.
The SuperPro bolt on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm.
Reducing the angles the CV joints are operating at will help avoid the expensive replacement costs of CV's and boots.
This wear is accelerated further if larger & wider wheels and tyres are fitted. - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | ReadyStrut Top Caps
| RS002 | 2 | | $101.33 |
Suspension Strut MountingReadyStrut Top CapsStrut Cap, Spring Seat, Nuts & Washers - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Shock Absorber Lower Bush Kit
Will not fit Koni & EFS Shocks | SPF2348PK | 1 | | $149.38 |
Bush, shock absorberShock Absorber Lower Bush KitWill not fit Koni & EFS Shocks Utilises superior SuperPro Hybrid material for massive increase in durability in all applications. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Shock Absorber Upper Bush Kit
| SPF3757K | 1 | | $61.68 |
Bush, shock absorberShock Absorber Upper Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Spring Seat Upper Bush Kit
| SPF3002K | 1 | | $68.02 |
Spring CapSpring Seat Upper Bush Kit- Fitting Position: Front
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush (Power Steering)
| SPF3144K | 1 | | $131.32 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)Suits O.E Rack only - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Strut Top Spacer Kit
Raises vehicle approximately 10-12mm | TRC008-6 | 1 | | $111.94 |
Spacer Sleeve, suspension strut support mountStrut Top Spacer KitRaises vehicle approximately 10-12mm OD: 125mm ID: 79mm H: 6mm Need more lift?? If you have added extra accessories to the front of your 4WD and need to correct the ride height, now SuperPro has the solution! The SuperPro Strut Spacer Kit can help with correcting lost ride height on either one side or both sides of your 4WD without having to change springs. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | SuperPro Easy-Lift Strut Spacer Kit
| TRC096FLK | 1 | | $164.97 |
Suspension Lift KitSuperPro Easy-Lift Strut Spacer KitVehicle Application Information: - To be used with standard height suspension only
This kit will lift the vehicle approx. 45mm and retains the standard suspension Kit contains 2 Front Strut Spacers
Easy Lift Kit (Spacer Lift kit) legal compliance. We explain here about the legality of spacer lift kits in particular how SuperPro spacer lift kits are legal: Click - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Sway Bar Link
LHS - Standard Replacement | TRC4017L | 1 | | $36.95 |
Stabiliser Bar, chassisSway Bar LinkLHS - Standard Replacement 12mm Ball Joint Link
85 Degree opposed
Length 140mm center to center - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link
RHS - Standard Replacement | TRC4017R | 1 | | $36.95 |
Stabiliser Bar, chassisSway Bar LinkRHS - Standard Replacement 12mm Ball Joint Link
85 Degree opposed
Length 140mm center to center - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1285L | 1 | | $203.85 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 170 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF2813-28K | 1 | | $71.02 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 28, 30, 31 & 34mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF2813-30K | 1 | | $71.02 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 28, 30, 31 & 34mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF2813-31K | 1 | | $71.02 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 28, 30, 31 & 34mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | 20mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0016RZ-20 | 1 | | $587.98 |
 Stabiliser Bar, chassis20mm Heavy Duty 3 Position Blade Adjustable Sway BarSuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package Vehicle Application Information: - Can not be used with Airbags fitted in the rear
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Brake Hose to Diff Extension Mount
Vehicles up to 2011 require one spacer, vehicles from 2012-on require two spacers. | SPF4359K | 1 | | $40.48 |
Adapter, brake linesBrake Hose to Diff Extension MountVehicles up to 2011 require one spacer, vehicles from 2012-on require two spacers. - Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Greasable Pin and Bush Kit - Front Eye
| SPF4456K | 1 | | $181.20 |
Bushing, leaf springGreasable Pin and Bush Kit - Front Eye- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Greasable Shackle and Bush Kit
Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings | KIT096SK | 1 | | $315.85 |
Bush, spring shackle spring carrierGreasable Shackle and Bush KitContains Greasable Shackles and Fixed Pins with all SuperPro Bushings The Shackles and Fixed Pins are often overlooked when upgrading the suspension of a 4WD.
Original shackles and fixed pins corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle.
Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
By fitting the complete package of Greasable Shackles, Fixed Pins and Bush Kit the rear end of any 4WD will handle just about anything that is throw at it! - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Leaf Spring Bush Kit
| KIT096HK | 1 | | $139.72 |
Bushing, leaf springLeaf Spring Bush KitLeaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By upgrading to SuperPro Leaf spring Bushes the improvement in ride and handling will be noticeable.
Vehicle Application Information: - H Kit for Severe Conditions or Heavy Duty applications
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Rear | Leaf Spring Bush Kit
| KIT096K | 1 | | $132.53 |
Bushing, leaf springLeaf Spring Bush KitLeaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By upgrading to SuperPro Leaf spring Bushes the improvement in ride and handling will be noticeable.
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Rear | Spring Front Eye Bush Kit
40mm spring eye inside diameter | SPF2670K | 1 | | $58.49 |
Bushing, leaf springSpring Front Eye Bush Kit40mm spring eye inside diameter - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Rear | Spring Rear Eye Bush Kit
| SPF2671K | 1 | | $40.57 |
Bushing, leaf springSpring Rear Eye Bush Kit- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Spring Shackle Upper Bush Kit
| SPF2672K | 1 | | $48.20 |
Bushing, leaf springSpring Shackle Upper Bush Kit- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | SuperPro Easy-Lift Rear Lift Kit
| TRC096RLK | 1 | | $235.66 |
Suspension Lift KitSuperPro Easy-Lift Rear Lift KitVehicle Application Information: - This Kit is a safe, legal alternative to Extended Shackles. To be used with standard height suspension only.
This kit will lift the vehicle approx. 45mm and retains the standard suspension. 2 Rear Raising Blocks, 4 U Bolts & Brake Hose Extension Kit. Easy Lift Kit (Spacer Lift kit) legal compliance. We explain here about the legality of spacer lift kits in particular how SuperPro spacer lift kits are legal: Click - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
