| Front | 33mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0081FZ-33 | 1 |  | $418.00 |
Stabiliser Bar, suspension33mm Heavy Duty 2 Position Blade Adjustable Sway BarSuperPro Roll Control Front Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of bigger front Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars are designed correctly and the Sway Bar links are lengthened, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Sway Bars will- Improve the stability by compensating for the change in centre of gravity of the chassis
- Increase tyre life
- Control body roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Rear Sway Bar Kit to get the complete handling upgrade package - Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Ball Joint Upper Boot Kit
| TRC7000RK | 2 | | $35.00 |
Ball Joint Repair KitBall Joint Upper Boot KitVehicle Application Information: - repair kit for SuperPro Roll Control arms only
Kit includes Boot and Cir Clips for one Control Arm - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: TRC470 (x1)
|
| Front | Control Arm Lower Camber Bolt Kit
| TRC0031 | 1 | | $236.00 |
Kit, camber adjustmentControl Arm Lower Camber Bolt KitComplete set of replacement Camber Bolts - Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower Complete Assembly Kit Standard - Camber Adjustable
| TRC475 | 1 | | $858.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Complete Assembly Kit Standard - Camber AdjustableLeft and right arms for standard replacement and repair upgrade with standard SuperPro bushes, uprated ball joints & camber pins. The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The SuperPro Roll Control Arm Kits are the ideal solution and come complete with:- Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Re-designed and Up-rated Ball Joints
- Up-rated Camber Bolts for four positions
Vehicle Application Information: - standard replacement
- Includes Ball Joint
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower Complete Assembly Offset Kit - Camber & Caster Adjustable
| TRC476 | 1 | | $883.00 |
 Control/Trailing Arm, wheel suspensionControl Arm Lower Complete Assembly Offset Kit - Camber & Caster AdjustableVehicle Application Information: - 0.6 Degrees of Camber Adjustment
Left and right arms for standard replacement and repair upgrade with SuperPro bushes for extra caster & camber correction, uprated ball joints & camber pins. The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The SuperPro Roll Control Arm Kits are the ideal repair upgrade solution and come complete with: - Two Complete Arm Assemblies
- Camber & Caster adjustable
- All SuperPro Bushings pre-installed
- Re-designed and Up-rated Ball Joints
- Up-rated Camber Bolts for four positions
- Camber increase version is ideally suited to a lifted vehicle
Vehicle Application Information: - alignment correction
- Includes Ball Joint
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Front Bush Kit
| SPF5028K | 1 |  | $311.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Fitting time [min]: 210
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Front Bush Kit - Offset
| SPF5028XK | 1 | | $311.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush Kit - OffsetControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushing solve this issue as and add the ability to 'tune' the wheel alignment to suit the specific requirements of vehicle and driver. Vehicle Application Information: - alignment correction - camber & caster adjustable
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Rear Bush Kit
| SPF5027K | 1 | | $316.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Rear Bush Kit - Offset
| SPF5027XK | 1 | | $316.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - OffsetControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushing solve this issue as and add the ability to 'tune' the wheel alignment to suit the specific requirements of vehicle and driver. Vehicle Application Information: - alignment correction - camber & caster adjustable
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 210
- Part of kit: (x)
|
| Front | Control Arm Replacement Ball Joint for Fixed Offset Control Arm
| KIT6470RK | 2 | | $87.00 |
Ball Joint Repair KitControl Arm Replacement Ball Joint for Fixed Offset Control ArmThis kit contains one replacement heavy-duty high-articulation ball joint for the SuperPro fixed offset Upper control arm. The kit contains a brand-new ball joint, which also includes a new dust boot, circlip, nut and any other required installation hardware.
Notes: If both ball joints need replacing, two kits will be required.
This kit is used to replace the ball joint in the following part numbers: TRC6470 Vehicle Application Information: - replacement Ball Joint to suit TRC6470 only
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: KIT6470K (x2)
|
| Front | Control Arm Replacement Ball Joint Kit for Adjustable Control Arm
| KIT8470RK | 2 | | $178.00 |
Ball Joint Repair KitControl Arm Replacement Ball Joint Kit for Adjustable Control ArmThis kit contains one replacement heavy-duty high-articulation ball joint for the SuperPro fixed offset Upper control arm. The kit contains a brand-new ball joint, which also includes a new dust boot, circlip, nut and any other required installation hardware.
Notes: If both ball joints need replacing, two kits will be required.
This kit is used to replace the ball joint in the following part numbers: TRC8470
Vehicle Application Information: - replacement Ball Joint to suit TRC8470 only
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: KIT8470K (x2)
|
| Front | Control Arm Replacement Bush Kit for Adjustable Control Arm
| KIT8470K | 1 | | $58.00 |
Mounting Kit, control/trailing arm mountingControl Arm Replacement Bush Kit for Adjustable Control ArmThis kit contains two replacement SuperPro polyurethane bushings for the SuperPro fixed offset upper control arm.
The replacement kit contains new bushings, crush tubes, a tube of grease and any other required hardware such as washers.
Note: Two kits will be required if the bushings in both arms need replacing.
This kit is used to replace the bushings in the following part numbers: TRC8470
Vehicle Application Information: - replacement bush kit to suit TRC8470 & TRC8480
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 120
- Part of kit: TRC8470 (x1)
|
| Front | Control Arm Replacement Bush Kit for Fixed Offset Control Arm
| KIT6470K | 2 | | $63.00 |
Mounting Kit, control/trailing arm mountingControl Arm Replacement Bush Kit for Fixed Offset Control ArmThis kit contains two replacement SuperPro polyurethane bushings for the SuperPro fixed offset upper control arm.
The replacement kit contains new bushings, crush tubes, a tube of grease and any other required hardware such as washers.
Note: Two kits will be required if the bushings in both arms need replacing.
This kit is used to replace the bushings in the following part numbers: TRC6470 Vehicle Application Information: - replacement bush kit to suit TRC6470 only
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: KIT6470RK (x2)
|
| Front | Control Arm Upper Complete Assembly - Adjustable
| TRC8470 | 1 | | $910.00 |
 Control/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - AdjustableVehicle Application Information: - Provides an alignment adjustment range of between +0.5 to +3.5 degrees caster and -1.5 to +1.5 degrees camber over the OE UCA.
Left and right arms for lifted vehicles with caster and camber correction. Adjustable upper control arms with heavy-duty, high-articulation adjustable ball joints and SuperPro polyurethane bushings for 1 to 3 inch lifted vehicles.
The SuperPro adjustable upper control arm is an ideal aftermarket solution for owners of lifted 4WD vehicles seeking superior strength, durability, and flexibility. The control arm is made of high-quality materials, including forged steel housings and steel tubes, coated in a 3-stage powder coat for excellent resistance to wear and corrosion. The robot-welded construction ensures precise and consistent assembly, resulting in a high-quality product.
The SuperPro adjustable UCA features a heavy-duty high-articulation adjustable ball joint that provides +/-1.5 degrees camber and caster adjustment while providing a surplus of articulation that allows maximum suspension travel without binding. This UCA also includes SuperPro’s renowned polyurethane bushings, which offer superior resilience and durability compared to traditional rubber bushings. The polyurethane material is resistant to abrasion, wear, and chemicals, making it ideal for harsh off-road environments. Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: KIT8470K (x1)
|
| Front | Control Arm Upper Complete Assembly - Fixed Offset
| TRC6470 | 1 | | $702.00 |
 Control/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - Fixed OffsetVehicle Application Information: - providing an increase of 3 degrees of caster over the OE UCA
Left and right offset arms for lifted vehicles with fixed caster and camber correction fitted with uprated ball Joints and SuperPro bushes to reduce arm movement. Fixed offset upper control arms with heavy-duty, high-articulation ball joints and SuperPro polyurethane bushings for 1 to 3 inch lifted vehicles. The SuperPro fixed offset upper control arm (UCA) is a high-performance aftermarket component designed to enhance the wheel alignment of lifted 4x4 vehicles, resulting in reduced tire wear and improved overall performance. This UCA is constructed using high-strength steel forgings and tube steel, making it durable and reliable for heavy-duty use. The components are robot-welded, ensuring consistent and precise manufacturing standards.
The SuperPro fixed offset UCA features a heavy-duty high-articulation ball joint that enables the suspension to have greater articulation without binding, allowing for improved control and handling over rough terrain.
This UCA also includes SuperPro’s renowned polyurethane bushings, which offer superior resilience and durability compared to traditional rubber bushings. The polyurethane material is resistant to abrasion, wear, and chemicals, making it ideal for harsh off-road environments.Vehicle Application Information: - Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: KIT6470RK (x1)
|
| Front | Control Arm Upper Inner Bush Kit
| SPF2845K | 1 | | $346.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Upper Inner Bush Kit - Offset
| SPF3230K | 1 | | $346.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - OffsetVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
An "Offset Kit" in this position is used to correct the camber change that occurs on a lifted or lowered vehicle.
By following the install instructions, this bushing kit can be fitted in multiple ways to change the position of the arm to get the optimal result for camber correction.
Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | ReadyStrut Top Caps
| RS002 | 2 | | $106.00 |
Suspension Strut MountingReadyStrut Top CapsStrut Cap, Spring Seat, Nuts & Washers - Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Part of kit: (x)
|
| Front | Shock Absorber Lower Bush Kit
| SPF2348PK | 1 | | $156.00 |
Bush, shock absorberShock Absorber Lower Bush KitVehicle Application Information: - does not suit Koni & EFS Shocks
Utilises superior SuperPro Hybrid material for massive increase in durability in all applications. Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Shock Absorber Upper Bush Kit
| SPF3757K | 1 | | $65.00 |
Bush, shock absorberShock Absorber Upper Bush Kit- Fitting Position: Front
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush (Power Steering)
| SPF3144K | 1 | | $137.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)Vehicle Application Information: - to suit original steering rack only
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Sway Bar Link
| TRC4017L | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
85 Degree opposed
Length 140mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Front | Sway Bar Link
| TRC4017R | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
85 Degree opposed
Length 140mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1285L | 1 | | $212.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 170 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF2506-29K | 1 | | $58.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes: 19, 20, 28, 29 & 30 mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | 24mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0078RZ-24 | 1 | | $418.00 |
Stabiliser Bar, suspension24mm Heavy Duty 3 Position Blade Adjustable Sway BarSuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: (x)
|
| Rear | Centre Bearing Alignment Kit
| TRC0043 | 1 | | $29.00 |
BoltCentre Bearing Alignment KitRe-aligns the tail shaft on lifted vehicles to remove vibration - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Panhard Rod Bush Kit
| SPF2836K | 1 | | $124.00 |
Bush, panhard rodPanhard Rod Bush KitVehicle Application Information: - replaces both ends of the bar
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1487-21K | 1 | | $45.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 & 27 mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 45
- Part of kit: (x)
|
