| Front | 33mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0081FZ-33 | 1 |  | $417.12 |
Stabiliser Bar, chassis33mm Heavy Duty 2 Position Blade Adjustable Sway BarSuperPro Roll Control Front Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of bigger front Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars are designed correctly and the Sway Bar links are lengthened, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Sway Bars will- Improve the stability by compensating for the change in centre of gravity of the chassis
- Increase tyre life
- Control body roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Rear Sway Bar Kit to get the complete handling upgrade package - Axle alignment required after fitting
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Ball Joint Upper Boot Kit
Kit includes Boot and Cir Clips for one Control Arm | TRC7000RK | 2 | | $34.32 |
Ball Joint Repair KitBall Joint Upper Boot KitKit includes Boot and Cir Clips for one Control Arm Vehicle Application Information: - repair kit for SuperPro Roll Control arms only
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: TRC470 (x1)
|
| Front | Control Arm Lower Camber Bolt Kit
Complete set of replacement Camber Bolts | TRC0031 | 1 | | $226.24 |
Kit, camber adjustmentControl Arm Lower Camber Bolt KitComplete set of replacement Camber Bolts - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower Complete Assembly Kit - Offset
Left and Right Arms for Lifted Vehicles with Extra Caster and Camber Correction | TRC476 | 1 | | $848.39 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Complete Assembly Kit - OffsetLeft and Right Arms for Lifted Vehicles with Extra Caster and Camber Correction Vehicle Application Information: - 0.6 Degrees of Camber Adjustment
Alignment Correction
Complete Arm Assemblies with Offset SuperPro Bushings, Uprated Ball Joints & Camber Pins. The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The SuperPro Roll Control Arm Kits are the ideal solution and come complete with:- Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Re-designed and Up-rated Ball Joints
- Up-rated Camber Bolts for four positions
- Camber increase version is ideally suited to a lifted vehicle
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower Complete Assembly Kit - Standard
Left and Right Arms for Standard Replacement and Repair Upgrade | TRC475 | 1 | | $824.82 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Complete Assembly Kit - StandardLeft and Right Arms for Standard Replacement and Repair Upgrade Complete Arm Assemblies with Standard SuperPro Bushings, Uprated Ball Joints & Camber Pins The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
The SuperPro Roll Control Arm Kits are the ideal solution and come complete with:- Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Re-designed and Up-rated Ball Joints
- Up-rated Camber Bolts for four positions
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
| SPF5028K | 1 |  | $298.52 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush KitStandard replacement Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Offset Kit
| SPF5028XK | 1 | | $298.52 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Offset KitAlignment Correction
Camber and Caster Adjustable Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushing solve this issue as and add the ability to 'tune' the wheel alignment to suit the specific requirements of vehicle and driver. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
| SPF5027K | 1 | | $303.14 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitStandard replacement Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Offset Kit
| SPF5027XK | 1 | | $303.14 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Offset KitAlignment Correction
Camber and Caster Adjustable Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushing solve this issue as and add the ability to 'tune' the wheel alignment to suit the specific requirements of vehicle and driver. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Upper Complete Assembly - Adjustable
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction | TRC470 | 1 | | $1025.13 |
 Control Arm/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - AdjustableLeft and Right Arms for Lifted Vehicles with Caster and Camber Correction Vehicle Application Information: - +/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment
These arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features - Increased articulation, perfect for the off road environment
- Provides for camber and caster adjustment using an adjustable ball joint
- Increased clearance between spring and Control Arm at full articulation
- SuperPro Bushings
- Made in Australia
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: TRC7000RK (x1)
|
| Front | Control Arm Upper Complete Assembly - Fixed Offset
Left and Right Offset Arms for Lifted Vehicles with Fixed Caster and Camber Correction | TRC6470 | 1 | | $701.10 |
 Control Arm/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - Fixed OffsetLeft and Right Offset Arms for Lifted Vehicles with Fixed Caster and Camber Correction Vehicle Application Information: - providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber
Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement These arms fitted with Heavy Ball joints and SuperPro Bushes to reduce Arm movement. Getting the correct alignment is no longer a problem. The SuperPro Fixed Offset Upper Control Arm is an all-in-one solution for any vehicle that has been lifted between 40mm and 65mm (2.5”). Providing an increase between 2.5 and 3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off a 50mm Lift) along with greater clearance to the coil over strut and more articulation of the arm. Key Features • Fixed offset alignment correction arms • In-built camber and caster change to suit lifted vehicle • Increased clearance between spring and Control Arm at full articulation • Heavy Duty ball joint • SuperPro Bushings - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit - Alignment Correction
Camber Adjustable | SPF3230K | 1 | | $331.78 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Alignment CorrectionCamber Adjustable Vehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
An "Offset Kit" in this position is used to correct the camber change that occurs on a lifted or lowered vehicle.
By following the install instructions, this bushing kit can be fitted in multiple ways to change the position of the arm to get the optimal result for camber correction.
Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit - Standard Replacement
| SPF2845K | 1 | | $331.78 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Standard ReplacementControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | ReadyStrut Top Caps
| RS002 | 2 | | $101.33 |
Suspension Strut MountingReadyStrut Top CapsStrut Cap, Spring Seat, Nuts & Washers - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Shock Absorber Lower Bush Kit
Will not fit Koni & EFS Shocks | SPF2348PK | 1 | | $149.38 |
Bush, shock absorberShock Absorber Lower Bush KitWill not fit Koni & EFS Shocks Utilises superior SuperPro Hybrid material for massive increase in durability in all applications. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Shock Absorber Upper Bush Kit
| SPF3757K | 1 | | $61.68 |
Bush, shock absorberShock Absorber Upper Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush (Power Steering)
| SPF3144K | 1 | | $131.32 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)Suits O.E Rack only - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Sway Bar Link
LHS - Standard Replacement | TRC4017L | 1 | | $36.95 |
Stabiliser Bar, chassisSway Bar LinkLHS - Standard Replacement 12mm Ball Joint Link
85 Degree opposed
Length 140mm center to center - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link
RHS - Standard Replacement | TRC4017R | 1 | | $36.95 |
Stabiliser Bar, chassisSway Bar LinkRHS - Standard Replacement 12mm Ball Joint Link
85 Degree opposed
Length 140mm center to center - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1285L | 1 | | $203.85 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 170 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF2506-29K | 1 | | $55.44 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes: 19, 20, 28, 29 & 30 mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | 24mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0078RZ-24 | 1 | | $401.81 |
Stabiliser Bar, chassis24mm Heavy Duty 3 Position Blade Adjustable Sway BarSuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Centre Bearing Alignment Kit
Re-Aligns Tail Shaft on lifted vehicles to remove vibration | TRC0043 | 1 | | $27.50 |
BoltCentre Bearing Alignment KitRe-Aligns Tail Shaft on lifted vehicles to remove vibration - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Panhard Rod Bush Kit
Replaces both ends of the bar | SPF2836K | 1 | | $119.22 |
Bush, panhard rodPanhard Rod Bush KitReplaces both ends of the bar - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1487-21K | 1 | | $42.65 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 & 27 mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | Trailing Arm Upper Bush Kit
| SPF1760K | 2 | | $127.06 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
