Front and Rear | Enhancement Bush Kit
| KIT242K | 1 |  | $1417.64 |
 Mounting, control/trailing armEnhancement Bush KitAs the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of any vehicle. Having an independent front suspension on this vehicle means the OEM bushes work very hard and durability, reliability and performance are compromised. With the solid axle rear suspension, the trailing arm bushes stabilise the forward and aft movement of the axle. As the front bushings wear they allow for the dynamic geometry of the suspension to change causing handling and tyre wear issues. As the rear bushings wear they can impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking. The panhard rod bushes control the sideways movement of the rear axle; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking. SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling. Lifting a vehicle also lifts the centre of gravity, in turn inducing greater forces on the suspension, requiring a more resilient suspension bushing in every location to control the attitude of the front upper and lower control arms as well as the rear upper and lower trailing arms.
Kit contains: - Front Control Arm Lower Bush Kit
- Front Control Arm Upper Bush Kit
- Front Steering Rack & Pinion Mount Bush
- Rear Panhard Rod Bush Kit
- Rear Trailing Arm Lower Bush Kit
- Rear Trailing Arm Upper Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 480
- Part of kit: (x)
|
Front | 30mm Heavy Duty 3 Position Blade Adjustable Sway Bar will not fit KDSS vehicles | RC0059FZ-30 | 1 |  | $551.45 |
Stabiliser Bar, chassis30mm Heavy Duty 3 Position Blade Adjustable Sway Barwill not fit KDSS vehicles SuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD. The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension. If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Control Arm Lower Bush Kit This Kit does both Front & Rear Bushings of the Lower Arm | SPF4051K | 1 |  | $544.15 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Bush KitThis Kit does both Front & Rear Bushings of the Lower Arm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | Control Arm Lower Complete Assembly Kit - Standard Left and Right Arms for Standard Replacement and Repair Upgrade
Suits Vehicles without KDSS | TRC483 | 1 |  | $919.09 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Complete Assembly Kit - StandardLeft and Right Arms for Standard Replacement and Repair Upgrade
Suits Vehicles without KDSS Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
TRC483 - Standard Replacement - Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Up-rated Ball Joints
- Improved Quality replacement Camber Bolts
The perfect replacement for your worn ball joints, worn bushes and seized camber pins! - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Control Arm Upper Complete Assembly - Adjustable Left and Right Arms for Lifted Vehicles with Caster and Camber Correction | TRC480 | 1 |  | $1025.13 |
 Control Arm/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - AdjustableLeft and Right Arms for Lifted Vehicles with Caster and Camber Correction Vehicle Application Information: - +/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop. These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features- Increased articulation, perfect for the off road environment
- Provides for camber and caster adjustment using an adjustable ball joint
- Increased clearance between spring and Control Arm at full articulation
- SuperPro Bushings
- Made in Australia
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Control Arm Upper Complete Assembly - Fixed Offset Left and Right Fixed Offset Arms for Lifted Vehicles with Caster and Camber Correction | TRC6480 | 1 |  | $701.10 |
 Control Arm/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - Fixed OffsetLeft and Right Fixed Offset Arms for Lifted Vehicles with Caster and Camber Correction Vehicle Application Information: - providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber
Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement These arms fitted with Heavy Ball joints and SuperPro Bushes to reduce Arm movement. Getting the correct alignment is no longer a problem. The SuperPro Fixed Offset Upper Control Arm is an all-in-one solution for any vehicle that has been lifted between 40mm and 65mm (2.5”). Providing an increase between 2.5 and 3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off a 50mm Lift) along with greater clearance to the coil over strut and more articulation of the arm. Key Features • Fixed offset alignment correction arms • In-built camber and caster change to suit lifted vehicle • Increased clearance between spring and Control Arm at full articulation • Heavy Duty ball joint • SuperPro Bushings - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Control Arm Upper Complete Assembly Kit - Standard Left and Right Arms for Standard Replacement and Repair Upgrade | TRC491 | 1 |  | $306.36 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly Kit - StandardLeft and Right Arms for Standard Replacement and Repair Upgrade Complete Arm Assemblies with Standard SuperPro Bushings and Uprated Ball Joints The SuperPro Complete Upper Control Arm Kit will overcome the repair problems associated with worn ball joints and replacing the bushes.
The New SuperPro Roll Control Arm Kits are the ideal repair and repair upgrade solution and come complete with: - Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Re-designed and Up-rated Ball Joints
- Standard configuration
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush Kit - Alignment Correction Camber Adjustable | SPF3230K | 1 |  | $331.78 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Alignment CorrectionCamber Adjustable Vehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
An "Offset Kit" in this position is used to correct the camber change that occurs on a lifted or lowered vehicle. By following the install instructions, this bushing kit can be fitted in multiple ways to change the position of the arm to get the optimal result for camber correction.
Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush Kit - Standard Replacement
| SPF2845K | 1 |  | $331.78 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Standard ReplacementControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | ReadyStrut Top Caps
| RS002 | 2 |  | $101.33 |
Suspension Strut MountingReadyStrut Top CapsStrut Cap, Spring Seat, Nuts & Washers - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF4056K | 1 |  | $103.27 |
Bush, steering rackSteering Rack & Pinion Mount Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Strut Top Spacer Kit Raises vehicle approximately 10-12mm | TRC008-6 | 1 |  | $111.94 |
Spacer Sleeve, suspension strut support mountStrut Top Spacer KitRaises vehicle approximately 10-12mm OD: 125mm ID: 79mm H: 6mm Need more lift?? If you have added extra accessories to the front of your 4WD and need to correct the ride height, now SuperPro has the solution! The SuperPro Strut Spacer Kit can help with correcting lost ride height on either one side or both sides of your 4WD without having to change springs. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
Front | Sway Bar Link LHS - Standard Replacement | TRC4017L | 1 |  | $36.95 |
Stabiliser Bar, chassisSway Bar LinkLHS - Standard Replacement 12mm Ball Joint Link
85 Degree opposed
Length 140mm center to center - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Front | Sway Bar Link RHS - Standard Replacement | TRC4017R | 1 |  | $36.95 |
Stabiliser Bar, chassisSway Bar LinkRHS - Standard Replacement 12mm Ball Joint Link
85 Degree opposed
Length 140mm center to center - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1285L | 1 |  | $203.85 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 170 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | 24mm Heavy Duty 3 Position Blade Adjustable Sway Bar will not fit KDSS vehicles | RC0059RZ-24 | 1 |  | $366.45 |
Stabiliser Bar, chassis24mm Heavy Duty 3 Position Blade Adjustable Sway Barwill not fit KDSS vehicles SuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD. The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension. If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
Rear | Panhard Rod Bush Kit Replaces both ends of the bar | SPF2836K | 1 |  | $119.22 |
Bush, panhard rodPanhard Rod Bush KitReplaces both ends of the bar - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | Sway Bar Link Standard Replacement | TRC4040 | 2 |  | $44.99 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 12mm Ball Joint/Bush Link
128mm center to center - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link - Heavy Duty Extended
| TRC4307 | 2 |  | $86.02 |
Stabiliser Bar, chassisSway Bar Link - Heavy Duty ExtendedSuperPro Heavy Duty Extended Thread Sway Bar Links are designed and manufactured to suit lifted Vehicles from 2-8”. They are designed to allow you to effectively trim the Sway Bar Link to your desired length to provide adequate tail shaft clearance and Sway Bar alignment. Manufactured from a Heavy Duty 16mm rod our Heavy Duty Sway Bar Links offer increased strength and stud articulation, providing for less stress on the sway bar links during wheel articulation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1285V | 1 |  | $203.85 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link with 12mm Vertical Ball Joint
Minimum Length 165 mm - Maximum Length 210 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Suits OE Bar Size | SPF4059-18K | 1 |  | $57.28 |
Mounting, stabiliserSway Bar Mount Bush KitSuits OE Bar Size available Sizes 18, 20, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF4059-20K | 1 |  | $57.28 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 18, 20, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF4059-25K | 1 |  | $57.28 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 18, 20, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF4059-27K | 1 |  | $57.28 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 18, 20, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Trailing Arm Lower Bush Kit
| SPF2461K | 2 |  | $111.31 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 210
- Part of kit: (x)
|
Rear | Trailing Arm Upper Bush Kit Replaces both ends of the bar | SPF1760K | 2 |  | $127.06 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush KitReplaces both ends of the bar - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|