| Front and Rear | Enhancement Bush Kit
| KIT209K | 1 |  | $729.00 |
Suspension KitEnhancement Bush KitKit contains: - Front Control Arm Lower-Inner Front Bush Kit
- Front Control Arm Lower-Inner Rear Bush Kit
- Rear Control Arm Upper-Inner Bush Kit
- Rear Control Arm Upper-Outer Bush Kit
- Rear Control Arm Lower-Inner & Outer Bush Kit
- Rear Trailing Arm Front Bush Kit
- Rear Toe Control Arm Outer Bush Kit
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 540
- Fitting Position: Front and Rear
- Part of kit: (x)
|
| Front | 22mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0011FZ-22 | 1 |  | $289.40 |
Sway Bar Stabiliser Kit22mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Axle alignment required after fitting
- Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | 24mm Extra Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0011FZ-24 | 1 | | $289.40 |
Sway Bar Stabiliser Kit24mm Extra Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Assembly Kit
| TRC1058 | 1 | | $360.50 |
 Control ArmControl Arm Lower Assembly KitThe SuperPro front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made this kit by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.- Fitting Position: Front
- Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
| SPF3091K | 1 |  | $125.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Front Bush Kit- Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
standard replacement | SPF5110K | 1 | | $152.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kitstandard replacement Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction | SPF5112K | 1 | | $167.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - 60mm OD
- Performance Handling Kit
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit- Single Offset
Alignment Correction | SPF5111K | 1 | | $160.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit- Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by re-positioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- 60mm OD
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Roll Centre Adjusting Ball Joint
2 x Ball Joints & 2 x Tie Rod Ends | TRC0002 | 1 | | $267.80 |
Ball JointRoll Centre Adjusting Ball Joint2 x Ball Joints & 2 x Tie Rod Ends Roll Centre Correction Kit - Fitting Time [min.]: 240
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
Does not include removal tool | SPF2889BK | 1 | | $77.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitDoes not include removal tool - Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
This kit includes o.e bush removal tool | SPF2889K | 1 | | $114.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitThis kit includes o.e bush removal tool - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4006 | 2 | | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm Ball Joint Link
60mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 | | $133.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
standard Size | SPF3096-21K | 1 | | $38.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitstandard Size available Sizes 18, 19, 20, 21, 22, 23, 24, 25 & 27mm Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | 20mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0096RZ-20 | 1 | | $369.80 |
Sway Bar Stabiliser Kit20mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting Difficulty: difficult
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit
| SPF4965K | 1 | | $121.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush Kit- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Control Arm Lower-Outer Bush Kit
| SPF3392K | 1 | | $69.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Outer Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 120
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
| SPF3390K | 1 | | $55.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Control Arm Upper-Outer Bush Kit
| SPF3389K | 1 | | $89.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Outer Bush Kit- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Crossmember Supplement Washers Bush Kit
Upper & Lower position, Only suited to vehicles with voids in original bushing top & bottom. | SPF3007K | 1 | | $85.00 |
Bush, sub-frameCrossmember Supplement Washers Bush KitUpper & Lower position, Only suited to vehicles with voids in original bushing top & bottom. - Fitting Time [min.]: 240
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Crossmember Supplement Washers Bush Kit
Bottom location position only, when vehicle has solid top mount, fits into original rubber bushing | SPF3008K | 1 | | $48.00 |
Bush, sub-frameCrossmember Supplement Washers Bush KitBottom location position only, when vehicle has solid top mount, fits into original rubber bushing - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 240
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Differential Bracket Mount Bush Kit
Rear | SPF3201K | 1 | | $85.00 |
Bush, differential mountDifferential Bracket Mount Bush KitRear - Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Differential Pinion, Bracket Mount Bush Kit
Front | SPF3200K | 1 | | $78.00 |
Bush, differential mountDifferential Pinion, Bracket Mount Bush KitFront - Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Time [min.]: 30
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 | | $133.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF2791-17K | 1 | | $37.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 14, 16, 17, 18, 19, 20, 21, 22 & 24mm Vehicle Application Information: - Fitting Time [min.]: 60
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner & Outer Bush Kit
| SPF3391K | 1 | | $160.00 |
Control Arm-/Trailing Arm BushToe Control Arm Inner & Outer Bush Kit- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Trailing Arm Front Bush Kit
| SPF3388-70K | 1 | | $143.00 |
Control Arm-/Trailing Arm BushTrailing Arm Front Bush Kit- Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
