| Front | 26mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0050FZ-26 | 1 |  |
Sway Bar Stabiliser Kit26mm Heavy Duty 2 Position Blade Adjustable Sway BarThe SuperPro Roll Control two position adjustable front sway bar is 26mm, an upgrade from a 24mm sway bar.
The front delivers a 38% rate increase and when used in conjunction with the SuperPro Roll Control Rear Sway bar this package delivers more grip, improved handling, less understeer and a more balanced vehicle. - Axle alignment required after fitting
 Fitment Difficulty- Fitting Position: Front
 2hrs Fitment Time- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
| SPF3091K | 1 |  |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Front Bush Kit- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
standard replacement | SPF5110K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kitstandard replacement Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction | SPF5112K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - 60mm OD
- Performance Handling Kit
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit- Single Offset
Alignment Correction | SPF5111K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit- Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by re-positioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- 60mm OD
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2hrs Fitment Time
- Part of kit: (x)
|
| Front | Roll Centre Adjusting Ball Joint
2 x Ball Joints & 2 x Tie Rod Ends | TRC0002 | 1 | |
Ball JointRoll Centre Adjusting Ball Joint2 x Ball Joints & 2 x Tie Rod Ends Roll Centre Correction Kit - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 4hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link
Cut To Length Link | TRC4007 | 2 | |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 12mm Ball Joint Link
Minimum Length 90mm - Maximum Length 320mm  Fitment Difficulty- Fitting Position: Front
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Suits OE Bar Size | SPF4396-24K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush KitSuits OE Bar Size available Sizes 24 & 27mm Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF4396-27K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 24 & 27mm Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | 20mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0013RZ-20 | 1 | |
Sway Bar Stabiliser Kit20mm Heavy Duty 3 Position Blade Adjustable Sway Bar- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2hrs Fitment Time
- Part of kit: (x)
|
| Rear | 22mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0013RZ-22 | 1 | |
Sway Bar Stabiliser Kit22mm Heavy Duty 3 Position Blade Adjustable Sway Bar- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2hrs Fitment Time
- Part of kit: (x)
|
| Rear | 24mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0013RZ-24 | 1 | |
Sway Bar Stabiliser Kit24mm Heavy Duty 3 Position Blade Adjustable Sway Bar- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Lower Complete Adjustable Arm Kit
Left and Right Arm Assemblies with SuperPro Bushings | TRC0011 | 1 | |
Control ArmControl Arm Lower Complete Adjustable Arm KitLeft and Right Arm Assemblies with SuperPro Bushings Vehicle Application Information: - +/- 1 Degree Camber Adjustment available
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit
Standard replacement | SPF3106K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitStandard replacement - Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit - Double Offset
Alignment Correction. Camber Adjustable | SPF3107K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush Kit - Double OffsetAlignment Correction. Camber Adjustable A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Lower-Outer Bush Kit
Replaces Hyme joint in hub | SPF3104K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Outer Bush KitReplaces Hyme joint in hub - Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
Standard replacement | SPF3100K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitStandard replacement - Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit - Double Offset
Alignment Correction. Camber Adjustable | SPF3101K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kit - Double OffsetAlignment Correction. Camber Adjustable A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
| Rear | Crossmember Insert Enhancement Kit
Includes Upper & Lower Inserts | SPF3907K | 1 | |
Suspension KitCrossmember Insert Enhancement KitIncludes Upper & Lower Inserts - Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
| Rear | Differential Bracket Mount Bush Kit
Rear | SPF3201K | 1 | |
Bush, differential mountDifferential Bracket Mount Bush KitRear - Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Differential Centre Rear Support Void Filler
| SPF4297K | 1 | |
Mounting, differentialDifferential Centre Rear Support Void Filler Fitment Difficulty- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Differential Pinion, Bracket Mount Bush Kit
Front | SPF3200K | 1 | |
Bush, differential mountDifferential Pinion, Bracket Mount Bush KitFront - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Link And Bush Kit
| SPF3915K | 1 | |
Sway Bar Bush KitSway Bar Link And Bush Kit- Fitment Difficulty
- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Link Lower Bush Kit
Suited to original link rod, Note upper is ball joint style mount | SPF3109K | 1 | |
Sway Bar Bush KitSway Bar Link Lower Bush KitSuited to original link rod, Note upper is ball joint style mount - Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Brace Kit
| TRC1005 | 1 | |
Sway Bar Stabiliser KitSway Bar Mount Brace Kit- Fitment Difficulty
- Fitting Position: Rear
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF3108-16K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 14, 15, 16, 18, 19, 20, 21, 22, 23 & 25mm Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner Bush Kit
Outer bushing is ball joint style | SPF3099K | 1 | |
Control Arm-/Trailing Arm BushToe Control Arm Inner Bush KitOuter bushing is ball joint style - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Trailing Arm Front Bush Kit
| SPF3817K | 1 | |
Control Arm-/Trailing Arm BushTrailing Arm Front Bush Kit- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Trailing Arm Rear Bush Kit
| SPF3098K | 1 | |
Control Arm-/Trailing Arm BushTrailing Arm Rear Bush Kit- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Part of kit: (x)
|
