| Front | Control Arm Lower-Inner Front Bush Kit
from 04/08 | SPF1915K | 1 |  | $57.62 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush Kitfrom 04/08 Bush OD 30mm
Tube 19x12.3x54 - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
up to 03/08 | SPF3311K | 1 | | $133.40 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush Kitup to 03/08 - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush & Bracket Kit
up to 03/08, Standard Replacement for Repair and Repair Upgrade | SPF4952K | 1 | | $247.30 |
 Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush & Bracket Kitup to 03/08, Standard Replacement for Repair and Repair Upgrade Suits vehicles with horizontally mounted Control Arm Bush into bracket SuperPro has now made it really easy and affordable to repair and upgrade a huge range of VAG vehicles. - The brackets and bushes are supplied together in one easy to install package, making this repair upgrade a no brainer!
- The negative effects for handling and braking that come from voided, soft or worn rubber bushes are eliminated with the new SuperPro Bracket and Bushing kit.
Now everyone can enjoy the feeling of positive arm location that SuperPro brings when replacing the OE rubber bushes.
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing.
SuperPro strongly advises that this bushing will be replaced at the same time. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
from 04/08, standard replacement | SPF2082K | 1 | | $96.16 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kitfrom 04/08, standard replacement Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
from 04/08, Alignment Correction | SPF2084K | 1 | | $105.51 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double Offsetfrom 04/08, Alignment Correction A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Engine Steady Mount Bush Kit
Sports use only, replaces lower rear bushing in dogbone mount | SPF2907-70K | 1 | | $124.68 |
Engine MountingEngine Steady Mount Bush KitSports use only, replaces lower rear bushing in dogbone mount - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Engine Steady Mount Bush Kit
Competition Use | SPF2907-80K | 1 | | $127.00 |
Engine MountingEngine Steady Mount Bush KitCompetition Use - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 |  | $216.81 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Beam Axle Pivot Bush Kit
| SPF2481K | 1 | | $260.11 |
Bush, beam axleBeam Axle Pivot Bush KitRemove original outer shell for fitment Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
