| Front and Rear | Radius Arms & Panhard Rods Bush Kit - Extra Offset
Suits 75mm or More Raised Height Vehicle | KIT060ADJXK | 1 |  | $605.00 |
 Suspension KitRadius Arms & Panhard Rods Bush Kit - Extra OffsetSuits 75mm or More Raised Height Vehicle As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of these vehicles.
Having a solid axle, front and rear, the caster arms and trailing arm bushes stabilise the forward and aft movement of both axles. As these bushings wear they impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking.
The panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking.
SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling.
You need a SuperPro Complete Bush Kit if:
- The rubber bushings start to show signs of wear
- Bigger Wheels & Tyres are fitted
- The vehicles ride height is changed
- The vehicle carries more loads
Kit contains: - Front Radius Arm To Diff Mount Bush Kit - Offset
- Front Radius Arm To Chassis Mount Bush Kit
- Front and Rear Panhard Rod Bush Kit to Suit all Models
- Rear Trailing Arm Upper and Lower Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 600
- Part of kit: (x)
|
| Front and Rear | Radius Arms & Panhard Rods Bush Kit - Standard Replacement
Suits Standard Height Vehicle | KIT060K | 1 | | $540.00 |
 Suspension KitRadius Arms & Panhard Rods Bush Kit - Standard ReplacementSuits Standard Height Vehicle As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of these vehicles.
Having a solid axle, front and rear, the caster arms and trailing arm bushes stabilise the forward and aft movement of both axles. As these bushings wear they impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking.
The panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking.
SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling.
You need a SuperPro Complete Bush Kit if:
- The rubber bushings start to show signs of wear
- Bigger Wheels & Tyres are fitted
- The vehicles ride height is changed
- The vehicle carries more loads
Kit contains: - Front Radius Arm To Diff Mount Bush Kit
- Front Radius Arm To Chassis Mount Bush Kit
- Front and Rear Panhard Rod Bush Kit to Suit all Models
- Rear Trailing Arm Upper and Lower Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 600
- Part of kit: (x)
|
| Front and Rear | Radius Arms & Panhard Rods Bush Kit
Suits 50mm Raised Vehicle | KIT107K | 1 | | $602.00 |
 Suspension KitRadius Arms & Panhard Rods Bush Kit Suits 50mm Raised Vehicle Kit contains all the bushings required to replace all radius arm, trailing arm and panhard rod bushings for all models As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of these vehicles. Having a solid axle, front and rear, the caster arms and trailing arm bushes stabilise the forward and aft movement of both axles. As these bushings wear they impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking. The panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking. SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling. You need a SuperPro Complete Bush Kit if: - The rubber bushings start to show signs of wear.
- Bigger Wheels & Tyres are fitted.
- The vehicles ride height is changed.
- The vehicle carries more loads.
Kit contains: - Front Radius Arm To Diff Mount Bush Kit - Offset
- Front Radius Arm To Chassis Mount Bush Kit
- Front and Rear Panhard Rod Bush Kit to Suit all Models
- Rear Trailing Arm Upper and Lower Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 600
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 600
- Part of kit: (x)
|
| Front | 20mm Heavy Duty Non Adjustable Sway Bar
suits Vehicles from 05/2002-on | RC0023F-20 | 1 |  | $348.00 |
Sway Bar Stabiliser Kit20mm Heavy Duty Non Adjustable Sway Barsuits Vehicles from 05/2002-on SuperPro Roll Control Front Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of bigger front Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars are designed correctly and the Sway Bar links are lengthened, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Sway Bars will- Improve the stability by compensating for the change in centre of gravity of the chassis
- Increase tyre life
- Control body roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Rear Sway Bar Kit to get the complete handling upgrade package - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | 22mm Heavy Duty Non Adjustable Sway Bar
suits Vehicles from 05/2002-on | RC0023F-22 | 1 | | $348.00 |
Sway Bar Stabiliser Kit22mm Heavy Duty Non Adjustable Sway Barsuits Vehicles from 05/2002-on SuperPro Roll Control Front Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of bigger front Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars are designed correctly and the Sway Bar links are lengthened, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Sway Bars will- Improve the stability by compensating for the change in centre of gravity of the chassis
- Increase tyre life
- Control body roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Rear Sway Bar Kit to get the complete handling upgrade package - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | 24mm Heavy Duty Non Adjustable Sway Bar
suits Vehicles from 05/2002-on | RC0023F-24 | 1 | | $348.00 |
Sway Bar Stabiliser Kit24mm Heavy Duty Non Adjustable Sway Barsuits Vehicles from 05/2002-on SuperPro Roll Control Front Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of bigger front Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars are designed correctly and the Sway Bar links are lengthened, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Sway Bars will- Improve the stability by compensating for the change in centre of gravity of the chassis
- Increase tyre life
- Control body roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Rear Sway Bar Kit to get the complete handling upgrade package - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit - Lower
Raises vehicle approximately 10mm | SPF4998-10K | 2 |  | $43.00 |
Spring CapCoil Spring Spacer Bush Kit - LowerRaises vehicle approximately 10mm A=160.50mm B=82mm C=10mm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit - Upper
Raises Vehicle approximately 5mm | SPF1734-5K | 2 | | $29.00 |
Spring CapCoil Spring Spacer Bush Kit - UpperRaises Vehicle approximately 5mm A=170mm B=115mm C=5mm D=10mm E=125mm Spring Spacer will reform to shape of the coil - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit - Upper
Raises Vehicle approximately 15mm | SPF1734K | 2 | | $51.00 |
Spring CapCoil Spring Spacer Bush Kit - UpperRaises Vehicle approximately 15mm A=170mm B=115mm C=15mm D=10mm E=125mm Spring Spacer will reform to shape of the coil - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit - Upper
Raises vehicle approximately 30mm | SPF2364-30K | 2 | | $89.00 |
Spring CapCoil Spring Spacer Bush Kit - UpperRaises vehicle approximately 30mm A=170mm B=69-116mm C=30mm D=20mm E=123mm
Helical Spring Seat & Tapered ID - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Lift Correction Arm Kit
Left and Right Arms for Lifted Vehicles with Caster Correction | TRC1015 | 1 | | $1145.00 |
Control ArmLift Correction Arm KitLeft and Right Arms for Lifted Vehicles with Caster Correction Raising a vehicle washes off castor and the effects of decreased castor are a loss of straight line stability, vague steering at higher speeds and can cause castor shimmy.
The SuperPro Lift Correction Arm Kit solves the issues with “built in” castor correction in the design, with nearly 4 Degrees for a 50mm lift and 2.5 Degrees for a 75mm lift.
Add in more articulation by utilising the SuperPro Hybrid material and this arm becomes the only choice for on or off road use.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Front | Panhard Rod Bush Kit
Bush OD 45mm both ends | SPF0398K | 1 | | $59.00 |
Bush, panhard rodPanhard Rod Bush KitBush OD 45mm both ends - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
| Front | Panhard Rod Bush Kit
Bush OD 62mm & 45mm - Series 3 Spherical bearing style at chassis end | SPF2344K | 1 | | $87.00 |
Bush, panhard rodPanhard Rod Bush KitBush OD 62mm & 45mm - Series 3 Spherical bearing style at chassis end - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
| Front | Radius Arm To Diff Mount Bush Kit
Standard Replacement | SPF0396K | 1 | | $135.00 |
Bush, radius armRadius Arm To Diff Mount Bush KitStandard Replacement - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Radius Arm To Diff Mount Bush Kit - Extra Offset
Suits 75mm or More Lifted Vehicles | SPF1721XK | 1 | | $208.00 |
Bush, radius armRadius Arm To Diff Mount Bush Kit - Extra OffsetSuits 75mm or More Lifted Vehicles Alignment Correction with extra offset for "High Lift Vehicles"
Allows up to 4 degrees Caster increase Vehicle Application Information: - Extra offset High Lift Vehicles To increase caster settings
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Radius Arm To Diff Mount Bush Kit - Offset
Suits 50mm Raised Vehicles | SPF1721K | 1 | | $204.00 |
Bush, radius armRadius Arm To Diff Mount Bush Kit - OffsetSuits 50mm Raised Vehicles Alignment Correction
Allows up to 2 degrees Caster increase - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Radius Arm To Chassis Bush Kit - Setback
Alignment correction kit | SPF3467K | 1 | | $83.00 |
Bush, radius armRadius Arm To Chassis Bush Kit - Setback Alignment correction kit - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Radius Arm To Chassis Mount Bush Kit
| SPF0397K | 1 | | $55.00 |
Bush, radius armRadius Arm To Chassis Mount Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Radius Arm To Diff Mount Bush Kit – Hybrid Version
Delivers superior articulation and durability
Suits Standard Height vehicles and/or Lifted vehicles fitted with aftermarket Caster increase arms. | TRC0396 | 1 | | $288.00 |
Bush, radius armRadius Arm To Diff Mount Bush Kit – Hybrid VersionDelivers superior articulation and durability
Suits Standard Height vehicles and/or Lifted vehicles fitted with aftermarket Caster increase arms. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Shock Absorber Upper & Lower Bush Kit
| SPF0740K | 2 | | $28.00 |
Bush, shock absorberShock Absorber Upper & Lower Bush Kit- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4010 | 2 | | $35.90 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 12mm Ball Joint/Bush Link
Length 163mm center to center - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link - Heavy Duty Extended
| TRC4307 | 2 | | $73.00 |
Sway Bar Stabiliser KitSway Bar Link - Heavy Duty ExtendedSuperPro Heavy Duty Extended Thread Sway Bar Links are designed and manufactured to suit lifted Vehicles from 2-8”.
They are designed to allow you to effectively trim the Sway Bar Link to your desired length to provide adequate tail shaft clearance and Sway Bar alignment.
Manufactured from a Heavy Duty 16mm rod our Heavy Duty Sway Bar Links offer increased strength and stud articulation, providing for less stress on the sway bar links during wheel articulation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link Bush Kit
| SPF2092BK | 1 | | $23.00 |
Bush, shock absorberSway Bar Link Bush Kit- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Models without ABS
Flat Bracket
Up to 2002 | SPF0626-20K | 1 | | $25.00 |
Sway Bar Bush KitSway Bar Mount Bush KitModels without ABS
Flat Bracket
Up to 2002 available Sizes 15, 18, 20, 21, 22, 23, 24, 25 & 27mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Models without ABS
Flat Bracket
Up to 2002 | SPF0626-22K | 1 | | $25.00 |
Sway Bar Bush KitSway Bar Mount Bush KitModels without ABS
Flat Bracket
Up to 2002 available Sizes 15, 18, 20, 21, 22, 23, 24, 25 & 27mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Models with ABS
Ribbed Bracket
2002 - on | SPF1484-19K | 1 | | $28.00 |
Sway Bar Bush KitSway Bar Mount Bush KitModels with ABS
Ribbed Bracket
2002 - on available Sizes 15, 16, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 & 29 mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Models with ABS
Ribbed Bracket
2002 - on | SPF1484-24K | 1 | | $28.00 |
Sway Bar Bush KitSway Bar Mount Bush KitModels with ABS
Ribbed Bracket
2002 - on available Sizes 15, 16, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 & 29 mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | 18mm Heavy Duty Non Adjustable Sway Bar
suits Vehicles from 05/2002-on | RC0023R-18 | 1 | | $348.00 |
Sway Bar Stabiliser Kit18mm Heavy Duty Non Adjustable Sway Barsuits Vehicles from 05/2002-on SuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | 24mm Heavy Duty Non Adjustable Sway Bar
suits Vehicles from 05/2002-on | RC0023R-24 | 1 | | $348.00 |
Sway Bar Stabiliser Kit24mm Heavy Duty Non Adjustable Sway Barsuits Vehicles from 05/2002-on SuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Coil Spring Spacer Bush Kit
Raises vehicle approximately 15mm | SPF1736-15K | 2 | | $61.00 |
Spring CapCoil Spring Spacer Bush KitRaises vehicle approximately 15mm A=180mm B=120mm C=15mm D=15mm E=140mm - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Coil Spring Spacer Bush Kit
Raises vehicle approximately 30mm | SPF1736-30K | 2 | | $102.00 |
Spring CapCoil Spring Spacer Bush KitRaises vehicle approximately 30mm A=180mm B=120mm C=30mm D=15mm E=140mm - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Coil Spring Spacer Bush Kit
Raises Vehicle approximately 5mm | SPF1736-5K | 2 | | $30.00 |
Spring CapCoil Spring Spacer Bush KitRaises Vehicle approximately 5mm A=180mm B=120mm C=5mm D=15mm E=140mm - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Panhard Rod Bush Kit
Bush OD 45mm both ends | SPF0398K | 1 | | $59.00 |
Bush, panhard rodPanhard Rod Bush KitBush OD 45mm both ends - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Panhard Rod Bush Kit
Bush OD 62mm & 45mm - Series 3 Spherical bearing style at chassis end | SPF2344K | 1 | | $87.00 |
Bush, panhard rodPanhard Rod Bush KitBush OD 62mm & 45mm - Series 3 Spherical bearing style at chassis end - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link
LHS - Standard Replacement | TRC4012 | 1 | | $31.40 |
Sway Bar Stabiliser KitSway Bar LinkLHS - Standard Replacement 10mm Ball Joint Link
90 Degree opposed
Length 235mm center to center - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link
RHS - Standard Replacement | TRC4014 | 1 | | $35.90 |
Sway Bar Stabiliser KitSway Bar LinkRHS - Standard Replacement 10mm Ball Joint Link
90 Degree opposed
Length 235mm center to center - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link - Heavy Duty Extended
with Quick Release Pin | TRC4304 | 1 | | $83.00 |
Sway Bar Stabiliser KitSway Bar Link - Heavy Duty Extendedwith Quick Release Pin Vehicle Application Information: SuperPro Heavy Duty Extended Thread Sway Bar Links are designed and manufactured to suit lifted Vehicles from 2-8”.
They are designed to allow you to effectively trim the Sway Bar Link to your desired length to provide adequate tail shaft clearance and Sway Bar alignment.
Manufactured from a Heavy Duty 16mm rod our Heavy Duty Sway Bar Links offer increased strength and stud articulation, providing for less stress on the sway bar links during wheel articulation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link - Heavy Duty Extended
| TRC4307 | 1 | | $73.00 |
Sway Bar Stabiliser KitSway Bar Link - Heavy Duty ExtendedVehicle Application Information: SuperPro Heavy Duty Extended Thread Sway Bar Links are designed and manufactured to suit lifted Vehicles from 2-8”.
They are designed to allow you to effectively trim the Sway Bar Link to your desired length to provide adequate tail shaft clearance and Sway Bar alignment.
Manufactured from a Heavy Duty 16mm rod our Heavy Duty Sway Bar Links offer increased strength and stud articulation, providing for less stress on the sway bar links during wheel articulation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Sway Bar Link Bush Kit
| SPF2092B-4K | 1 | | $14.00 |
Sway Bar Bush KitSway Bar Link Bush Kitre-use all original washers - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link Quick Release Pin
Universal Quick Release Pin | TRC4304QRK | 2 | | $22.00 |
Sway Bar Stabiliser KitSway Bar Link Quick Release PinUniversal Quick Release Pin
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1481-17K | 1 | | $31.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 15, 17, 18, 19, 20, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1481-18K | 1 | | $31.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 15, 17, 18, 19, 20, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1481-19K | 1 | | $31.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 15, 17, 18, 19, 20, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | Trailing Arm Kit - Lower
Suits Litfed vehicles - 11mm Extended Length | TRC1027 | 1 | | $280.00 |
Control ArmTrailing Arm Kit - LowerSuits Litfed vehicles - 11mm Extended Length These lower trailing arms are longer than the standard arms and are fitted with a Polyurethane spherical joint, with all the articulation and none of the side effects of running a metal one in this location. The bushing delivers: - No noticeable NVH increase
- High articulation
- Long service life
- Lifetime warranty
This control arm set is suitable for a repair enhancement on standard height suspension and up to 75mm raised suspension. - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Trailing Arm Kit - Upper Adjustable
| TRC1026 | 1 | | $380.00 |
Control ArmTrailing Arm Kit - Upper Adjustable These upper adjustable arms have the unique SuperPro “double locking” mechanism that eliminates the adjusters coming loose. Fitted with a Polyurethane spherical joint, with all the articulation and none of the side effects of running a metal one in this location. The bushing delivers: - No noticeable NVH increase
- High articulation
- Long service life
- Lifetime warranty
This control arm set is suitable for a repair enhancement on standard height suspension and up to 75mm raised suspension. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Trailing Arm Lower Bush Kit
| SPF0399K | 2 | | $73.00 |
Control Arm-/Trailing Arm BushTrailing Arm Lower Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Trailing Arm Upper Bush Kit
| SPF0399K | 2 | | $73.00 |
Control Arm-/Trailing Arm BushTrailing Arm Upper Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
