| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees camber | SPF4351-12K | 1 |  | $38.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 12mm - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Assembly Kit
| TRC1022 | 1 |  | $270.00 |
Control ArmControl Arm Assembly KitStandard Replacement.
Includes left and right Arms fitted with Ball joints and SuperPro Bushes to reduce Arm movement.
- Fitting Position: Front
- Axle alignment required after fitting
 2hrs Fitment Time Fitment Difficulty- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
| SPF2418K | 1 | | $108.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Front Bush Kit- Axle alignment required after fitting
- 3hrs Fitment Time
- Fitting Position: Front
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Standard replacement | SPF3111K | 1 | | $127.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitStandard replacement 2 x Standard bushings per kit Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- 3.5hrs Fitment Time
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction | SPF3113K | 1 | | $141.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 Degree Caster Adjustment available
2 x offset bushings for caster adjustment A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - 60mm OD bush check size
- Performance Handling Kit
- Fitting Position: Front
- Axle alignment required after fitting
- Fitment Difficulty
- 3.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
Alignment Correction | SPF3112K | 1 | | $141.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- 60mm OD bush check size
- Axle alignment required after fitting
- Fitment Difficulty
- 3.5hrs Fitment Time
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Performance Kit
Extra Caster Kit | TRC1023 | 1 | | $295.00 |
Control ArmControl Arm Performance KitExtra Caster Kit Performance Kit with extra Caster.
Includes left and right Arms fitted with Ball joints and offset SuperPro Bushes to reduce Arm movement. These arms are for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
- Axle alignment required after fitting
- 2hrs Fitment Time
- Fitting Position: Front
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4038 | 2 | | $31.40 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm Ball Joint Link
180 degree opposed
Length 265mm center to center - 0.5hrs Fitment Time
- Fitting Position: Front
 Fitment Difficulty- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 | | $184.00 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - 1hrs Fitment Time
- Fitting Position: Front
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Standard Sway Bar Size | SPF3362-20K | 1 | | $34.00 |
Sway Bar Bush KitSway Bar Mount Bush KitStandard Sway Bar Size available Sizes 20, 23, 25, 27, 27.5 & 28mm Vehicle Application Information:  Fitment Difficulty- 0.75hrs Fitment Time
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | 22mm Heavy Duty 3 Point Adjustable Sway Bar
suits Vehicles with OE Bar only | RC0097RZ-22 | 1 | | $242.00 |
Sway Bar Stabiliser Kit22mm Heavy Duty 3 Point Adjustable Sway Barsuits Vehicles with OE Bar only If you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer!
By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar.
- Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | 22mm Heavy Duty 3 Point Adjustable Sway Bar
suits FWD Vehicles with OE Bar only | RC0097RZ-22 | 1 | | $242.00 |
Sway Bar Stabiliser Kit22mm Heavy Duty 3 Point Adjustable Sway Barsuits FWD Vehicles with OE Bar only If you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer!
By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar.
- Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
| SPF3359K | 1 | | $89.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kit- 1hrs Fitment Time
- Fitment Difficulty
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit - Offset
| SPF3360K | 1 | | $93.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kit - Offset- Axle alignment required after fitting
- Fitting Position: Rear
- Fitment Difficulty
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $35.90 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Position: Rear
- 0.5hrs Fitment Time
- Fitment Difficulty
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 | | $130.00 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Rear
- 1hrs Fitment Time
- Fitment Difficulty
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Standard Sway Bar Size | SPF3362-20K | 1 | | $34.00 |
Sway Bar Bush KitSway Bar Mount Bush KitStandard Sway Bar Size available Sizes 20, 23, 25, 27, 27.5 & 28mm Vehicle Application Information: - Fitment Difficulty
- 0.75hrs Fitment Time
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner Bush Kit
| SPF2291K | 1 | | $124.00 |
Control Arm-/Trailing Arm BushToe Control Arm Inner Bush Kit- 2.5hrs Fitment Time
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitment Difficulty
- Part of kit: (x)
|
| Rear | Toe Control Arm Outer Bush Kit
| SPF2291K | 1 | | $124.00 |
Control Arm-/Trailing Arm BushToe Control Arm Outer Bush Kit- 2.5hrs Fitment Time
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitment Difficulty
- Part of kit: (x)
|
| Rear | Trailing Arm Front Bush Kit
| SPF3358K | 1 | | $ |
Control Arm-/Trailing Arm BushTrailing Arm Front Bush Kit- Axle alignment required after fitting
- 2hrs Fitment Time
- Fitting Position: Rear
- Fitment Difficulty
- Part of kit: (x)
|
